Search results for "caes"
Converter from a MIPI20T to a MICTOR38 connector with ETM pin-out, designed to connect a MIPI20T-HS Whisker (from a CombiProbe or MicroTrace) to a target with MICTOR38 connector. Can be used for debugging with optional 4-bit trace if a MICTOR38 connector with 4-bit ETM pin-out is mounted on the target.
JTAG only converter from Mictor76, Mictor38, Samtec50, Samtec20 or JTAG14 to Mictor38, Samtec50, Samtec20 or JTAG14. Not all connectors can be mounted at the same time. Please refer to https://www.lauterbach.com/support/static/LA-7640.pdf Connector types for top and bottom side must be ordered explicitly!
Legacy Trace Port Recorder with 1 GigaByte trace memory and a streaming rate up to 180 MByte/s. Requires a suitable trace preprocessor or Nexus Adapter. Requires PowerDebug X50, PowerDebug PRO, or PowerDebug II. Can be extended with a Logic-Analyzer-Probe (LA-7945) or Analog-Probe (LA-7949). Out of production since April 2022.
Legacy Trace Port Recorder with 4 GigaByte trace memory and a streaming rate up to 180 MByte/s. Requires a suitable trace preprocessor or Nexus Adapter. Requires PowerDebug X50, PowerDebug PRO, or PowerDebug II. Can be extended with a Logic-Analyzer-Probe (LA-7945) or Analog-Probe (LA-7949). Out of production since April 2022.
Universal debug controller of the Extended Connectivity Line (Gen 4) with 1 Gbit Ethernet (via UDP/IP) and USB 3.x Gen 1 for Windows/Linux/macOS Requires a TRACE32 Debug Cable and CombiProbe. Can be extened via an optional PowerTrace trace module and PowerIntergrator logic analyzer. Requires TRACE32 software DVD 2015/02 or newer.
Converter from a MIPI20T to a TI-14 debug connector, designed to connect the debug lines of a MIPI20T-HS Whisker (from a CombiProbe or MicroTrace) to a target with TI-14 connector. Can be used for debugging if a TI-14 connector is mounted on the target, which is used on many targets with processors from Texas Instruments. There is a pin header to optionally receive trace signals from elsewhere.
Converter from a MIPI20T to an IDC20A debug connector, designed to connect the debug signals of a MIPI20T-HS Whisker (from a CombiProbe or MicroTrace) to a target with IDC20A connector. Can be used for debugging if an IDC20A connector is mounted on the target, which is used on many targets with Arm SoCs or Arm-compatible SoCs. There is a pin header to optionally receive trace signals from elsewhere.
Converter to connect the ARM Debug Cable or the CombiProbe to a Mictor connector on the target. This is needed if you want to debug without a Preprocessor and if there is only a Mictor connector on the target. The trace signals of the CombiProbe are connected to the lowest four trace signals of the Mictor (ETMv3 pinout, continuous mode). But tracing is normally no use case due to the bandwidth limitations of the CombiProbe. Former name: ARM Conv. ARM-20/MIPI-34 to Mictor-38
License to use TRACE32 PowerView Front-End TRACE32 PowerView Front-End can be used to connect to third-party solutions such as: - virtual target/simulators - target server such as GDB For details please refer to tool chain support list for your core architecture supports Arm based architectures floating license via RLM (Reprise License Manager) Please add the RLM HostID of the license server to your order (please see our FAQ)
Converter from IDC20A to 12 pin PMOD connectors with the JTAG pinout from SiFive. The adapter exists in two variants: with male and female PMOD connector. This adapter has the male PMOD connector. PMOD is an open standard defined by Digilent for peripherals used with FPGAs or microcontrollers. The PMOD pinout of this adapter does ONLY work with targets that use the pinout that was defined by SiFive. So it is not a general/official RISC-V pinout. In case of FPGA boards, the pinout may depend on the used FPGA image.