Search results for "caes"
Adapter for debugging over a CAN bus with up to 8 Mbit/s supporting DAP over CAN Physical Layer (DXCPL), DAP over CAN Message (DXCM) and more. Includes a removable CAN termination resistor (120 Ohm). Requires an AUTO26 Debug Cable V3 (LA-3011), AUTO26 Debug Cable V2 (LA-3010), or a CombiProbe2 with AUTO26 Whisker (LA-3081).
CAN termination (120 Ohm) with one female and one male D-Sub-9 connector connects all pins between both connectors with 120 Ohm resistor between line 2 and 7.
Adapter for debugging over a CAN bus with up to 1 Mbit/s supporting DAP over CAN Physical Layer (DXCPL) and more, with internal termination resistor. Usage with PowerDebug E40 / X50 / PRO requires one of the following: LA-3203 Debugger for TriCore AUTO26 (PACK), LA-3081 CombiProbe 2 for AUTO26 (PACK), LA-2707 Debugger for TriCore Automotive PRO (EOL). Usage with PowerDebug USB 3 / USB 2 / Ethernet / II requires one of the following:: LA-3203 Debugger for TriCore AUTO26 (PACK), LA-3081 CombiProbe 2 for AUTO26 (PACK), LA-2707 Debugger for TriCore Automotive PRO (EOL). LA-3737 Debugger for TriCore Automotive (EOL), LA-7756 Debugger for TriCore Standard (16-pin) (EOL).
Developer Tool Operational Verification and Validation Cases and Procedures (TOVVCP)
Converter to connect the CombiProbe to a SD or Micro SD card connector in case the signals alternatively provide debug functionality
Supports ARC EM/HS/EV/VPX, ARC 600/700, ARCtangent-A4/A5 Please add the base serial number of your existing debug cable to your order. LA-3750A in LA-3737 Debugger for TriCore Automotive can not be used to debug a stand-alone ARC chip LA-3750A can not be programmed on LA-7756 Debugger for TriCore Standard
Converter from a MIPI20T to a MIPI34 connector, designed to connect a MIPI20T-HS Whisker (from a CombiProbe or MicroTrace) to a target with MIPI34 connector. Can be used for debugging with optional 4-bit trace if a MIPI34 connector is mounted on the target. There is a pin header to optionally receive trace signals from elsewhere. Can be used to connect the debug signals of a MIPI20T-HS Whisker to an AUTOFOCUS II MIPI preprocessor or a PowerTrace Serial.
Converter from IDC20A and HSSTP to R-Car H3 Starter Kit from Renesas Former name: Conv. ARM-20/Samtec40 HSSTP to RCAR-H3-SKIT
Converter from IDC20A connector to Altera 10-pin (Byteblaster) or RISC-V 10-pin Target connector pitch can be 2.54mm or 1.27mm (half size)
Converter from IDC20A connector to MCHP FlashPro socket Target connector pitch can be 2.54mm or 1.27mm (half size) Usable for PolarFire SoC Icicle Kit