Search results for "caes"

Universal debug controller with USB 3.0 for Windows/Linux/macOS can be used for all TRACE32 Debug Cable and for the TRACE32 CombiProbe requires TRACE32 software DVD 2013/02 or newer

Converter to connect an ARM Preprocessor and a CombiProbe to a Mictor connector on the target. This converter is designed for the OMAP3503 board from Spectrum Digital. The upper ETM signals on the Mictor can alternatively be used for system trace (SDTI).

Converter to connect an AutoFocus II Preprocessor with MICTOR-38 and an IDC20A Debug Cable to MIPI-10/-20T/-34. Enables the AutoFocus II Preprocessor to receive trace data from the 4-bit wide trace port of a MIPI-20T target connector. The converter is configured for MIPI-20T via 0 Ohm resistors. By soldering the resistors differently MIPI-34 can be supported as well. You can get the same converter pre-configured for MIPI-34 by ordering LA-3842 Converter Mictor-38/IDC20A to MIPI-34.

Converter to connect an AutoFocus II Preprocessor with MICTOR-38 and an IDC20A Debug Cable to MIPI-10/-20/-34. Enables the AutoFocus II Preprocessor to receive trace data from the 4-bit wide trace port of a MIPI-34 target connector. The converter is configured for MIPI-34 via 0 Ohm resistors. By soldering the resistors differently MIPI-20T can be supported as well. You can get the same converter pre-configured for MIPI-20T by ordering LA-3809 Converter Mictor-38/IDC20A to MIPI-20T.

Converter for MIPS-EJTAG 14 pins to 24 pins to support IDT processors IMPORTANT: This adpater can also be used for 20 pin target connections, but a separate wire for VCC is required. Please ask your local distributor.

Debug solution for RISC-V 32-bit standard core(s). Concurrent debugging of two or more RISC-V 32-bit standard cores requires a License for Multicore Debugging MicroTrace (LA-7960N). Can not be upgraded to include support for other core architectures.

Converter from a MIPI20T to a MIPI60 connector, designed to connect a MIPI20T-HS Whisker (from a CombiProbe or MicroTrace) to a target with MIPI60 connector. Can be used for debugging with optional 4-bit trace if a MIPI60 connector is mounted on the target.

Universal BDM debug and JTAG controller, 200 MHz PowerPC, 64 MB DRAM, High-Speed FPGA USB 2.0 (Win98/2000/XP/Linux) included can be upgraded to PowerTrace by LA-7691 (512MByte) Out of production since November 2014

General documentation of the TRACE32 Tool Qualification Support-Kit. Includes general documentation and the following test suites: - Debug - Coverage Includes additionally test suite - TRACE32 TriCore Instruction Set Simulator which requires LA-8096L 1 User Floating Lic. ISS Test Suite TriCore - TRACE32 M68K Instruction Set Simulator which requires LA-8097L 1 User Floating Lic. ISS Test Suite 68K Each test suite contains a set of test cases, corresponding test case documentation and results. Downloadable after registration in TRACE32 TQSK Customer Portal For Windows, Linux, and macOS.

Legacy Trace Port Recorder with 2 GigaByte trace memory and a streaming rate up to 180 MByte/s. Requires a suitable trace preprocessor or Nexus Adapter. Requires PowerDebug X50, PowerDebug PRO, or PowerDebug II. Can be extended with a Logic-Analyzer-Probe (LA-7945) or Analog-Probe (LA-7949).