Product Catalogue

Supports Armv8-A/R or Armv9-A/R based Cortex-A and Cortex-R 32/64-bit cores IDC20A debug cable supports 5-pin standard JTAG, cJTAG and Serial Wire Debug Port, (0.4 V - 5 V) Multicore debugging included includes software for Windows, Linux and MacOSX requires Power Debug Module cJTAG and SWD require Power Debug Interface USB 2.0/USB 3.0, Power Debug Ethernet, PowerTrace, Power Debug II or PowerDebug PRO

Supports Armv8 and Armv9 based Cortex-A, Cortex-R, Cortex-X and Neoverse 32/64-bit cores GTM, SPT, IPU and Multicore debugging included only suitable for debug cables newer than 08/2008 please add the serial number of the existing debug cable to your order

Supports Armv8 and Armv9 based Cortex-A, Cortex-R, Cortex-X and Neoverse 32/64-bit cores GTM, SPT, IPU and Multicore debugging included only suitable for debug cables newer than 08/2008 please add the serial number of the existing debug cable to your order

License for debugging the Cortex-A/R (Armv8/9) architecture via "Software Debugging over XCP" protocol specified by ASAM e.V. as well as the ETAS-specific debugging protocol floating license via RLM (Reprise License Manager) Please add the RLM HostID of the license server to your order (please see our FAQ)

License for debugging the Cortex-A/R (Armv8/v9) architecture via "Software Debugging over Arm CoreSight Wire Protocol (CSWP)" Floating license via RLM (Reprise License Manager) Please add the RLM HostID of the license server to your order (please see our FAQ) The TRACE32 software must be specially adapted from Lauterbach for each chip. Please contact the Lauterbach development department before ordering.

Supports Armv8 and Armv9 based Cortex-A, Cortex-R, Cortex-X and Neoverse 32/64-bit cores GTM, SPT, IPU and Multicore debugging included IDC20A debug cable supports 5-pin standard JTAG, cJTAG and Serial Wire Debug Port, (0.4V - 5V) Includes software for Windows, Linux and macOS cJTAG and SWD require PowerDebug Interface USB 2.0/USB 3.0, PowerDebug Ethernet, PowerTrace, PowerDebug II PowerDebug PRO, PowerDebug E40 or PowerDebug X50

License for debugging Armv8 and Armv9 based Cortex-A, Cortex-R, Cortex-X and Neoverse 32/64-bit core via Generic Transactor Library for Windows and Linux for RTL emulation or RTL simulation requires that EDA partner supports GTL interface floating license via RLM (Reprise License Manager) Please add the RLM HostID of the license server to your order (please see our FAQ)

License for debugging Armv8 and Armv9 based Cortex-A, Cortex-R, Cortex-X and Neoverse 32/64-bit cores via Tessent Embedded Analytics (former UltraSoC) USB Debug for Windows and Linux requires TRACE32 software R.2020.09 The TRACE32 software must be specially adapted from Lauterbach for each chip. Please contact the Lauterbach development departement before ordering. floating license via RLM (Reprise License Manager) Please add the RLM HostID of the license server to your order (please see our FAQ)

CombiProbe 2 with MIPI34 whisker for debugging and tracing. Voltage Range: 1.2V...3.3V (5V tolerant inputs). Target Connector: MIPI34, MIPI20T, MIPI10 Trace memory: 512 MByte. Maximum trace port width: 4 pins. Maximum trace bandwidth: 200 MBit/s per trace pin. Includes the TRACE32 software for Windows, Linux and macOS on DVD and for download. Requires at least one of the following A-licenses: LA-3743A Debug. for Cortex-A/R (Armv8 and Armv9) Add. LA-7844A Debug Cortex-M (Armv6/7/8 32-bit) Add. LA-7843A Debug Cortex-A/-R (Armv7 32-bit) Add. LA-7765A JTAG Debugger License for Arm11 Add. LA-7742A JTAG Debugger License for Arm9 Add. LA-7746A JTAG Debugger License for Arm7 Add. Requires trace license LA-7970X for on-chip ETM traces of Cortex-A/R. Requires Power Debug Interface USB 3.0, PowerDebug II, PowerDebug PRO, PowerDebug E40 or PowerDebug X50. Extend your CombiProbe with a Mixed-Signal Probe (LA-2500), to record and correlate digital and analog signals.

Debug cable and 512 MByte of trace memory Supports Standard-JTAG, cJTAG and Serial Wire Debug Port Bandwidth of 400 MBit/s per trace channel requires at least one of the following A-licenses: LA-3743A Debug. for Cortex-A/R (Armv8 and Armv9) Add. LA-7742A (JTAG Debugger License for ARM9 Add.) LA-7746A (JTAG Debugger License for ARM7 Add.) LA-7765A (JTAG Debugger License for ARM11 Add.) LA-7843A (JTAG Debugger License for CORTEX-A Add.) LA-7844A (JTAG Debugger License for CORTEX-M Add.) Trace support (up to 4-bit) included: - MIPI System Trace - ITM via Serial Wire Output/TPIU - ETM Cortex-M continuous mode via TPIU Supports the following trace licenses: LA-7970X (Trace License for the ARM Architecture) requires Power Debug Interface USB 3.0, Power Debug II or Power Debug PRO 5V tolerant inputs; max. output level 3.3V

supports AndeStar (0.4 V - 5 V) Extension applicable to the following debug cables (purchased separately): for LA-7746 (JTAG Debugger for ARM7) for LA-7742 (JTAG Debugger for ARM9) for LA-7744 (JTAG Debugger for ARM10) for LA-7765 (JTAG Debugger for ARM11) for LA-7843 (JTAG Debugger for Cortex-A/-R (ARMv7)) for LA-7844 (JTAG Debugger for Cortex-M) please add the serial number of the existing debug cable to your order

CombiProbe 2 with MIPI20-HS whisker for debugging and tracing. Voltage Range: 1.2V...5.0V. Target Connector: MIPI20T, MIPI10 Trace Memory: 512 MByte. Maximum Trace Port Width: 4 pins. Maximum Trace Bandwidth: 400 MBit/s per trace pin. Includes the TRACE32 software for Windows, Linux and macOS on DVD and for download. Requires at least one of the following A-licenses: LA-3743A Debug. for Cortex-A/R (Armv8 and Armv9) Add. LA-7844A Debug Cortex-M (Armv6/7/8 32-bit) Add. LA-7843A Debug Cortex-A/-R (Armv7 32-bit) Add. LA-7765A JTAG Debugger License for Arm11 Add. LA-7742A JTAG Debugger License for Arm9 Add. LA-7746A JTAG Debugger License for Arm7 Add. LA-2540A Debugger for RISC-V 32-bit Add. LA-2541A Debugger for RISC-V 64-bit Add. Requires trace license LA-7970X for on-chip ETM traces of Cortex-A/R. Requires trace license LA-2767X for RISC-V off-chip traces emitted via a 4-bit Pin Interface Block (PIB). Requires Power Debug Interface USB 3.0,PowerDebug II, PowerDebug PRO, PowerDebug E40 or PowerDebug X50. Extend your CombiProbe with a Mixed-Signal Probe (LA-2500), to record and correlate digital and analog signals.

supports PowerQuiccIII (MPC85XX) and QorIQ 32-bit with e500 core (P10XX, P2010, P2020, BSC9xxx) includes software for Windows, Linux and MacOSX requires Power Debug Module debug cable with 16 pin connector Concurrent debugging of two or more cores in multicore chip requires a License for Multicore Debugging (LA-7960X)

Supports dsPIC33C (0.9 V - 5.5 V) Debugging of dual-core dsPIC requires LA-2762 Package for CombiProbe 2 dsPIC Dual Core Includes software for Windows, Linux and macOS. Requires Power Debug Interface USB 2.0/USB 3.0, Power Debug Ethernet, Power Debug II, PowerDebug PRO, PowerDebug E40 or PowerDebug X50

Debug cable and 128-MByte of trace memory Supports Standard-JTAG, cJTAG and Serial Wire Debug Port Bandwidth of 400 MBit/s per trace channel requires at least one of the following A-licenses: LA-7742A (JTAG Debugger License for ARM9 Add.) LA-7746A (JTAG Debugger License for ARM7 Add.) LA-7765A (JTAG Debugger License for ARM11 Add.) LA-7843A (JTAG Debugger License for CORTEX-A Add.) LA-7844A (JTAG Debugger License for CORTEX-M Add.) Trace support (up to 4-bit) included: - MIPI System Trace - ITM via Serial Wire Output/TPIU - ETM Cortex-M continuous mode via TPIU Supports the following trace licenses: LA-7970X (Trace License for the ARM Architecture) requires Power Debug Interface USB 3.0, Power Debug II or Power Debug PRO 5V tolerant inputs; max. output level 3.3V

supports dsPIC33C (0.9 V - 5.5 V) Debugging of dual-core dsPIC requires LA-2762 Package for CombiProbe 2 dsPIC Dual Core includes software for Windows, Linux and macOS requires PowerDebug Interface USB 2.0/USB 3.0, PowerDebug Ethernet, PowerDebug II, PowerDebug PRO, PowerDebug E40 or PowerDebug X50 AUTO26 debug cable

Debug cable and 128-MByte of trace memory Supports Standard-JTAG, cJTAG and Serial Wire Debug Port Bandwidth of 200 MBit/s per trace channel requires at least one of the following A-licenses: LA-7742A (JTAG Debugger License for ARM9 Add.) LA-7746A (JTAG Debugger License for ARM7 Add.) LA-7765A (JTAG Debugger License for ARM11 Add.) LA-7843A (JTAG Debugger License for CORTEX-A Add.) LA-7844A (JTAG Debugger License for CORTEX-M Add.) Trace support (up to 4-bit) included: - MIPI System Trace - ITM via Serial Wire Output/TPIU - ETM Cortex-M continuous mode via TPIU Supports the following trace licenses: LA-7970X (Trace License for the ARM Architecture) requires Power Debug Interface USB 2.0/USB 3.0, Power Debug Ethernet, PowerTrace, Power Debug II or Power Debug PRO 5V tolerant inputs; max. output level 3.3V

Parallel preprocessor for Arm/Cortex Embedded Trace Macrocell (ETM), Program Trace Macrocell (PTM) Connector cable and software, Variable threshold level and termination voltage, AUTOFOCUS self calibration technology, Support all ETM modes, with 2 MICTOR connectors, Voltage: 1.2 to 3.3V - else contact support Traceport: 1-32bit Bandwidth: 9.6 Gbps (300MHz clock speed, DDR) Connector: 2x38 pin mictor connector Requires PowerTrace II / III, PowerTrace PX or PowerTrace/Ethernet Version 6 or higher

Preprocessor for ARM/Cortex Embedded Trace Macrocell (ETM), Program Trace Macrocell (PTM), connector cable and software, 200 MHz clock speed (200 Mbps), 4 x Trace-Depth, 0.9 to 3.6V support normal mode, 4 bit DeMux mode, normal halfrate mode, Mux mode and 4 bit DeMux halfrate mode support max. 16 bit trace port size Important: 3ns setup time, 1ns hold time needed ETMV3.x Continuous Mode only without idle-filter

Parallel preprocessor for ARM/Cortex Embedded Trace Macrocell (ETM), Program Trace Macrocell (PTM) Connector cable and software, Variable threshold level and termination voltage, AUTOFOCUS self calibration technology, Support all ETM modes, with 2 MICTOR connectors, Voltage: 1.2 to 3.3V - else contact support Traceport: 1-32bit Bandwidth: 9.6 Gbps (300MHz clock speed, DDR) Connector: 2x38 pin mictor connector Requires PowerTrace II / III, PowerTrace PX or PowerTrace/Ethernet Version 6 or higher