Search results for "v40"
Converter for Samtec ERF8-ERF8 Series CCS-female-female adaption 40 Positions e.g. Preproc. for ARM-ETM/HSSTP HF-Flex LA-7988, part from LA-1232
Converter from JTAG 16 (TriCore pinout of LA-7756) and Samtec 40 pin -> ERF8 22 pin (Samtec 22 pin) Includes Samtec 22-pin flex extension Converter from AUTO26 (TriCore pinout of LA-3737) and Samtec 40 pin -> ERF8 22 pin (Samtec 22 pin) for LA-3912 Preproc. TriCore AGBT HF-Flex and if no separate JTAG/AUTO connector is available on the target for LA-2707 (Debugger for TriCore Automotive PRO) LA-3203 (Debugger for TriCore AUTO26 (PACK)) LA-3737 (JTAG Debugger for TriCore Automotive) LA-7756 (OCDS Debugger for TriCore)
Converter from Samtec40 HSSTP and/or from two Mictor38 to FMC (FPGA Mezzanine Card).connector. This converter brings suitable connectors for off-chip trace recording to evaluation boards by AMD Xilinx which have only an FMC connector, but neither a Samtec40 connector (for serial off-chip trace) nor Mictor38 connectors (for parallel off-chip trace). The converter features 4 additional LEDs and a 156.25 MHz oscillator.
CombiProbe 2 with AUTO26 Whisker for debugging and DAP Streaming, supporting DAP (DAP2, DAP3, DAP4, DAPWide), JTAG, DXCPL/DXCM. For optimal performance, we recommend using a DAP mode. DAP streaming is supported for TriCore (in DAP mode) and works most effectively with DAPWide (up to 320 Mbit/s). For DXCPL/DXCM, you will likely require the CAN-Box (LA-3889) as well. Voltage Range: 1.8V to 5.0V. Debug Clock Frequency: 10 kHz to 160 MHz Target Connector: AUTO26, AUTO20, AUTO10 Trace Memory: 512 MByte. Includes the TRACE32 software for Windows, Linux and macOS on DVD and for download. Requires the following A-license: LA-7756A (Debugger for TriCore Standard Additional). Trace analysis and display requires LA-3799X (Trace License for TriCore ED). Requires Power Debug Interface USB 3.0,PowerDebug II, PowerDebug PRO, PowerDebug E40 or PowerDebug X50. Please note that TriCore SoCs usually support only 3.3V or 5V in DAP mode. Debug clock frequency in JTAG mode is typically limited to 40 MHz on TriCore SoCs (while up to 160 MHz is supported in DAP mode). Extend your CombiProbe with a Mixed-Signal Probe (LA-2500), to record digital and analog signals and correlate them with MCDS DAP streaming. (Requires PowerView R.2024.02 or higher).
Adapter for PowerTrace Serial to support RH850 trace ports with up to 4 lanes via a 40-pin target connector. Requires PowerTrace Serial (LA-3303, LA-3323, or LA-3560).
Converter from JTAG 16 (PPC-COP pinout of LA-3794/LA-3795) and Samtec 40 pin to Power.org 70 pin for LA-7987 Preproc. QorIQ PowerPC HSTP HF-Flex
Converter from JTAG 16 (PPC-COP pinout of LA-3794/LA-3795) and Samtec 40 pin to Power.org 46 pin for LA-7987 Preproc. QorIQ PowerPC HSTP HF-Flex
Converter from JTAG 16 (PPC-COP pinout of LA-3794/LA-3795) and Samtec 40 pin to Power.org 22 pin for LA-7987 Preproc. QorIQ PowerPC HSTP HF-Flex
Supports Qorivva MPC5xxx/SPC5xxx (e200 cores) and Freescale PX SERIES processors. eTPU, GTM and SPT debugging included. Concurrent debugging of multiple e200 cores on multicore processors requires a License for Multicore Debugging (LA-7960X) (not necessary for lockstep mode). Includes software for Windows, Linux and macOS. Requires PowerDebug E40/X50, PowerDebug II or PRO, PowerDebug Interface USB 2.0/USB 3.0, PowerDebug Ethernet, PowerTrace Ethernet. Includes LA-3873 (Conv. AUTO26 to JTAG14 OnCE) Voltage range 0.9V to 5.5V
Supports Armv7-A/R based Cortex-A and Cortex-R 32-bit cores GTM and IPU debugging included IDC20A debug cable supports 5-pin standard JTAG, cJTAG and Serial Wire Debug Port, (0.4V - 5V) Includes software for Windows, Linux and macOS cJTAG and SWD require PowerDebug Interface USB 2.0/USB 3.0, PowerDebug Ethernet, PowerTrace, PowerDebug II PowerDebug PRO, PowerDebug E40 or PowerDebug X50