Product Catalogue

Preprocessor for ST40 with AUD, 200 MHz clock speed with 36-pin Yamaichi connector Requires LA-7985 for 14 pin AUD connector voltage range 3.0V to 3.6V Requires PowerTrace Version 6 or higher or PowerTrace II / III

Preprocessor for ST40 8 Bit data AUD, connector cable and software, 100 MHz clock speed, 4 x trace depth voltage range 3.0V to 3.6V

Converter JTAG-RH850 of LA-3719 (Debugger RH850 14pin) and from AUTO26 of LA-2709 (Debugger for RH850/V850 Automotive PRO) LA-3205 (Debugger for RH850/V850 AUTO26 (PACK)) LA-3739 (Debugger RH850 Automotive) and Samtec 40 pin of LA-3943 (Preproc. RH850 HSTP HF-Flex) to Samtec ERF 34-pin RH850 pinout Includes Samtec 34-pin flex extension

Converter to connect a RH850 HSTP Aurora Preprocessor to the Renesas Evalboard: RH850-CCC-404PIN-PB-T1-V1

supports devices up to 16 MBit, 8 and 16 Bit, 40ns access time, 3.3V including adapter for DIL28/32 and DIL40, supports up to two ROM Monitor licenses

CombiProbe 2 base hardware. Requires suitable Whisker-Cable to connect to target. Requires Power Debug Interface USB 3.0, PowerDebug II, PowerDebug PRO, PowerDebug E40 or PowerDebug X50. This TRACE32 product is a license carrier. Requires a suitable, programmed TRACE32 A-license.

Supports RH850 via JTAG, LPD4, LPD1 ICU-M core support included supports V850 via NWIRE Includes software for Windows, Linux and macOS. requires Power Debug Interface USB 2.0/USB 3.0, Power Debug Ethernet, Power Debug II PowerDebug PRO or PowerDebug E40 Debug cable with 14 pin connector

Galvanic isolation for AUTO26 Debug Cable V2 and V3 Components rated to IEC60950-1 (600 V working voltage) Suitable for: LA-3010 AUTO26 Debug Cable V2 LA-3011 AUTO26 Debug Cable V3 LA-3203 Debugger for TriCore AUTO26 (PACK) LA-3205 Debugger for RH850/V850 AUTO26 (PACK) LA-3206 Debugger for MPC5xxx AUTO26 (PACK) LA-2707 Debugger for TriCore Automotive PRO LA-2708 Debugger for MPC5xxx Automotive PRO LA-2709 Debugger for RH850/V850 Automotive PRO LA-2712 Debug-Bundle MPC5xxx/RH850 Automotive PRO LA-2713 Debug-Bundle MPC5xxx/TriCore Automotive PRO LA-2714 Debug-Bundle TriCore/RH850 Automotive PRO Requires: Power Debug Interface USB 2.0/USB 3.0, Power Debug Ethernet, PowerTrace, Power Debug II, PowerDebug PRO, PowerDebug E40 or PowerDebug X50 and TRACE32 software DVD 2021/09 SP2 or newer

Trace Preprocessor with data for MPC505, MPC555, MPC56X, MPC821, MPC860 with soldered edge connection connector cable and software max bus frequency 66MHz Requires PowerTrace Version 6 or higher to support more than 40 MHz voltage range 2.5V to 5.0V

This TRACE32 product is a license carrier. It requires a suitable programmed TRACE32 A-license. Requires any PowerDebug with USB 2/USB 3/Ethernet and newer. (Not supported with LA-7702 and LA-7704) Requires TRACE32 R.2022.09-SP2 or newer. DAP streaming supported with TRACE32 build 160619 or higher (R.2023.09) in conjuction with PowerDebug X50, E40, or PRO. Voltage range 1.8V to 5.0V.

Program flow trace for TriCore OCDS Level2 to Samtec 60 connector, cable and software 130 MHz clock speed, 3.0 - 5.5 V 2 x RISC-Trace-Depth converter LA-7927 required for AMP40 connection

supports RH850 via JTAG, LPD4 ICU-M core support included supports V850 via NWIRE includes software for Windows, Linux and MacOSX requires Power Debug Interface USB 2.0/USB 3.0, Power Debug Ethernet, Power Trace Ethernet, Power Debug II, PowerDebug PRO or PowerDebug E40 debug cable with 26 pin connector includes LA-2700 (Conv. AUTO26 to JTAG14 RH850)

Debug probe suitable for most SoCs. This TRACE32 Product is a license carrier. It requires a suitable, programmed TRACE32 A-license. Requires Power Debug Interface USB 2.0/USB 3.0, PowerDebug Ethernet, PowerTrace Ethernet, PowerDebug II, PowerDebug PRO, PowerDebug E40. or PowerDebug X50 Voltage range 0.4V to 5V

Program flow trace for TriCore OCDS Level2 connector (Samtec60), cable and software 180 MHz clock speed, 1.8 - 3.3 V 4 x RISC-Trace-Depth converter LA-7927 required for AMP40 connection

Supports RH850 via JTAG, LPD4 ICU-M core support included supports V850 via NWIRE Includes software for Windows, Linux and macOS. Requires PowerDebug E40/X50, PowerDebug II or PRO, PowerDebug Interface USB 2.0/USB 3.0, PowerDebug Ethernet, PowerTrace Ethernet. Debug cable with 26 pin connector. Includes LA-2700 (Conv. AUTO26 to JTAG14 RH850) Voltage range 0.9V to 5.5V

supports (1.8V - 5.0V) PPC40x includes software for Windows, Linux and MacOSX requires Power Debug Module debug cable with 16 pin connector

adapter for 16-bit DIL-EPROM, connection to DIL40

Converter from JTAG 20 (ARM pinout) and Samtec 40 pin to Samtec 40 pin for LA-7988 Preproc. ARM HSSTP HF-Flex

Converter for ST40 AUD Trace Converts Yamaichi 36 pins to AUD ST40 14 pins

Serial Trace Port Controller with 4 Giga Byte Trace Memory for MPC57xx/SPC5 Required converter: - Samtec34 on target requires LA-3871: Converter Samtec40 HSTP+AUTO26+JTAG14 to Samtec34 including Samtec 34-pin flex extension cable - Samtec22 on target requires LA-3872: Converter Samtec40 HSTP+AUTO26+JTAG14 to Samtec22 including Samtec 22-pin flex extension cable requires PowerDebug II Ethernet or PowerDebug PRO Host requirements: USB 3.0 or 1000 MBit Ethernet interface, 4.0 GigaByte RAM voltage range 0.15V to 1.25V