Product Catalogue

CombiProbe 2 base hardware. Requires suitable Whisker-Cable to connect to target. Requires Power Debug Interface USB 3.0, PowerDebug II, PowerDebug PRO, PowerDebug E40 or PowerDebug X50. This TRACE32 product is a license carrier. Requires a suitable, programmed TRACE32 A-license.

Galvanic isolation for AUTO26 Debug Cable V2 and V3 Components rated to IEC60950-1 (600 V working voltage) Suitable for: LA-3010 AUTO26 Debug Cable V2 LA-3011 AUTO26 Debug Cable V3 LA-3203 Debugger for TriCore AUTO26 (PACK) LA-3205 Debugger for RH850/V850 AUTO26 (PACK) LA-3206 Debugger for MPC5xxx AUTO26 (PACK) LA-2707 Debugger for TriCore Automotive PRO LA-2708 Debugger for MPC5xxx Automotive PRO LA-2709 Debugger for RH850/V850 Automotive PRO LA-2712 Debug-Bundle MPC5xxx/RH850 Automotive PRO LA-2713 Debug-Bundle MPC5xxx/TriCore Automotive PRO LA-2714 Debug-Bundle TriCore/RH850 Automotive PRO Requires: Power Debug Interface USB 2.0/USB 3.0, Power Debug Ethernet, PowerTrace, Power Debug II, PowerDebug PRO, PowerDebug E40 or PowerDebug X50 and TRACE32 software DVD 2021/09 SP2 or newer

CombiProbe 2 with DCI OOB v2 Whisker for closed chassis debugging via the Intel® Out Of Band (OOB) Direct Connect Interface (DCI). Includes the TRACE32 software for Windows, Linux and macOS on DVD and for download. Requires suitable A-license for debugging. Requires Power Debug Interface USB 3.0, PowerDebug II, PowerDebug PRO, PowerDebug E40 or PowerDebug X50.

This TRACE32 product is a license carrier. It requires a suitable programmed TRACE32 A-license. Requires any PowerDebug with USB 2/USB 3/Ethernet and newer. (Not supported with LA-7702 and LA-7704) Requires TRACE32 R.2022.09-SP2 or newer. DAP streaming supported with TRACE32 build 160619 or higher (R.2023.09) in conjuction with PowerDebug X50, E40, or PRO. Voltage range 1.8V to 5.0V.

Supports RH850 via JTAG, LPD4, LPD1 ICU-M core support included supports V850 via NWIRE Includes software for Windows, Linux and macOS. requires Power Debug Interface USB 2.0/USB 3.0, Power Debug Ethernet, Power Debug II PowerDebug PRO or PowerDebug E40 Debug cable with 14 pin connector

CombiProbe 2 with MIPI60-Cv2 Whisker for debugging of Intel® SoCs. Supports 8 HOOK pins and 2 JTAG ports. Voltage range 1.0V to 1.8V. Includes 5 Inch flexible flat cable for target connection. Includes the TRACE32 software for Windows, Linux and macOS on DVD and for download. Requires suitable A-license for debugging. Requires Power Debug Interface USB 3.0, PowerDebug II, PowerDebug PRO, PowerDebug E40 or PowerDebug X50.

supports RH850 via JTAG, LPD4 ICU-M core support included supports V850 via NWIRE includes software for Windows, Linux and MacOSX requires Power Debug Interface USB 2.0/USB 3.0, Power Debug Ethernet, Power Trace Ethernet, Power Debug II, PowerDebug PRO or PowerDebug E40 debug cable with 26 pin connector includes LA-2700 (Conv. AUTO26 to JTAG14 RH850)

Debug probe suitable for most SoCs. This TRACE32 Product is a license carrier. It requires a suitable, programmed TRACE32 A-license. Requires Power Debug Interface USB 2.0/USB 3.0, PowerDebug Ethernet, PowerTrace Ethernet, PowerDebug II, PowerDebug PRO, PowerDebug E40. or PowerDebug X50 Voltage range 0.4V to 5V

CombiProbe 2 with MIPI60-Cv2 Whisker for debugging of Intel® SoCs. Supports 8 HOOK pins and 2 JTAG ports. Voltage range 1.0V to 1.8V. Includes 12 Inch flexible flat cable for target connection. Includes the TRACE32 software for Windows, Linux and macOS on DVD and for download. Requires suitable A-license for debugging. Requires Power Debug Interface USB 3.0, PowerDebug II, PowerDebug PRO, PowerDebug E40 or PowerDebug X50.

Supports RH850 via JTAG, LPD4 ICU-M core support included supports V850 via NWIRE Includes software for Windows, Linux and macOS. Requires PowerDebug E40/X50, PowerDebug II or PRO, PowerDebug Interface USB 2.0/USB 3.0, PowerDebug Ethernet, PowerTrace Ethernet. Debug cable with 26 pin connector. Includes LA-2700 (Conv. AUTO26 to JTAG14 RH850) Voltage range 0.9V to 5.5V

CombiProbe 2 with AUTO26 Whisker for debugging and DAP Streaming, supporting DAP (DAP2, DAP3, DAP4, DAPWide), JTAG, DXCPL/DXCM. For optimal performance, we recommend using a DAP mode. DAP streaming is supported for TriCore (in DAP mode) and works most effectively with DAPWide (up to 320 Mbit/s). For DXCPL/DXCM, you will likely require the CAN-Box (LA-3889) as well. Voltage Range: 1.8V to 5.0V. Debug Clock Frequency: 10 kHz to 160 MHz Target Connector: AUTO26, AUTO20, AUTO10 Trace Memory: 512 MByte. Includes the TRACE32 software for Windows, Linux and macOS on DVD and for download. Requires the following A-license: LA-7756A (Debugger for TriCore Standard Additional). Trace analysis and display requires LA-3799X (Trace License for TriCore ED). Requires Power Debug Interface USB 3.0,PowerDebug II, PowerDebug PRO, PowerDebug E40 or PowerDebug X50. Please note that TriCore SoCs usually support only 3.3V or 5V in DAP mode. Debug clock frequency in JTAG mode is typically limited to 40 MHz on TriCore SoCs (while up to 160 MHz is supported in DAP mode). Extend your CombiProbe with a Mixed-Signal Probe (LA-2500), to record digital and analog signals and correlate them with MCDS DAP streaming. (Requires PowerView R.2024.02 or higher).

CombiProbe 2 with MIPI34 whisker for debugging and tracing. Voltage Range: 1.2V...3.3V (5V tolerant inputs). Target Connector: MIPI34, MIPI20T, MIPI10 Trace memory: 512 MByte. Maximum trace port width: 4 pins. Maximum trace bandwidth: 200 MBit/s per trace pin. Includes the TRACE32 software for Windows, Linux and macOS on DVD and for download. Requires at least one of the following A-licenses: LA-3743A Debug. for Cortex-A/R (Armv8 and Armv9) Add. LA-7844A Debug Cortex-M (Armv6/7/8 32-bit) Add. LA-7843A Debug Cortex-A/-R (Armv7 32-bit) Add. LA-7765A JTAG Debugger License for Arm11 Add. LA-7742A JTAG Debugger License for Arm9 Add. LA-7746A JTAG Debugger License for Arm7 Add. Requires trace license LA-7970X for on-chip ETM traces of Cortex-A/R. Requires Power Debug Interface USB 3.0, PowerDebug II, PowerDebug PRO, PowerDebug E40 or PowerDebug X50. Extend your CombiProbe with a Mixed-Signal Probe (LA-2500), to record and correlate digital and analog signals.

CombiProbe 2 with MIPI20-HS whisker for debugging and tracing. Voltage Range: 1.2V...5.0V. Target Connector: MIPI20T, MIPI10 Trace Memory: 512 MByte. Maximum Trace Port Width: 4 pins. Maximum Trace Bandwidth: 400 MBit/s per trace pin. Includes the TRACE32 software for Windows, Linux and macOS on DVD and for download. Requires at least one of the following A-licenses: LA-3743A Debug. for Cortex-A/R (Armv8 and Armv9) Add. LA-7844A Debug Cortex-M (Armv6/7/8 32-bit) Add. LA-7843A Debug Cortex-A/-R (Armv7 32-bit) Add. LA-7765A JTAG Debugger License for Arm11 Add. LA-7742A JTAG Debugger License for Arm9 Add. LA-7746A JTAG Debugger License for Arm7 Add. LA-2540A Debugger for RISC-V 32-bit Add. LA-2541A Debugger for RISC-V 64-bit Add. Requires trace license LA-7970X for on-chip ETM traces of Cortex-A/R. Requires trace license LA-2767X for RISC-V off-chip traces emitted via a 4-bit Pin Interface Block (PIB). Requires Power Debug Interface USB 3.0,PowerDebug II, PowerDebug PRO, PowerDebug E40 or PowerDebug X50. Extend your CombiProbe with a Mixed-Signal Probe (LA-2500), to record and correlate digital and analog signals.

CombiProbe 2 to debug and trace MIPS32 CPUs with 4 Bit IFLOW trace. Voltage Range: 1.2V...3.3V (5V tolerant inputs). Target Connector: MIPI34, MIPI20T, MIPI10, eJTAG/IFLOW. Trace memory: 512 MByte. Maximum trace port width: 4 pins. Maximum trace bandwidth: 200 MBit/s per trace pin. Iincluded adapter for eJTAG and IFLOW connector. Includes the TRACE32 software for Windows, Linux and macOS on DVD and for download. Requires the following A-license: LA-7760A (JTAG Debugger for MIPS32). 4-Bit IFlow program trace requires: LA-7971X (Trace License for the MIPS32). Requires TRACE32 Software R.2022.02 (build 142224) or newer. Requires Power Debug Interface USB 3.0, PowerDebug II, PowerDebug PRO, PowerDebug E40 or PowerDebug X50. Extend your CombiProbe with a Mixed-Signal Probe (LA-2500), to record and correlate digital and analog signals.

Supports dsPIC33C (0.9 V - 5.5 V) Debugging of dual-core dsPIC requires LA-2762 Package for CombiProbe 2 dsPIC Dual Core Includes software for Windows, Linux and macOS. Requires Power Debug Interface USB 2.0/USB 3.0, Power Debug Ethernet, Power Debug II, PowerDebug PRO, PowerDebug E40 or PowerDebug X50

supports dsPIC33C (0.9 V - 5.5 V) Debugging of dual-core dsPIC requires LA-2762 Package for CombiProbe 2 dsPIC Dual Core includes software for Windows, Linux and macOS requires PowerDebug Interface USB 2.0/USB 3.0, PowerDebug Ethernet, PowerDebug II, PowerDebug PRO, PowerDebug E40 or PowerDebug X50 AUTO26 debug cable

Debug cable with license bundle for debugging and tracing of MPC5xxx and TriCore. Includes software for Windows, Linux and macOS. Requires Power Debug Interface USB 2.0/USB 3.0, Power Debug Ethernet, Power Trace Ethernet, Power Debug II, PowerDebug PRO, PowerDebug E40 or PowerDebug X50. Automotive Debug Cable 26-pin. Voltage range 1.8V to 5.0V.

Debug cable with license bundle for debugging and tracing of TriCore and RH850. Includes software for Windows, Linux and macOS. Requires Power Debug Interface USB 2.0/USB 3.0, Power Debug Ethernet, Power Trace Ethernet, Power Debug II, PowerDebug PRO, PowerDebug E40 or PowerDebug X50. Automotive Debug Cable 26-pin. Voltage range 1.8V to 5.0V.

Supports Qorivva MPC5xxx/SPC5xxx (e200 cores) and Freescale PX SERIES processors. eTPU, GTM and SPT debugging included. Concurrent debugging of multiple e200 cores on multicore processors requires a License for Multicore Debugging (LA-7960X) (not necessary for lockstep mode). Includes software for Windows, Linux and macOS. Requires PowerDebug E40/X50, PowerDebug II or PRO, PowerDebug Interface USB 2.0/USB 3.0, PowerDebug Ethernet, PowerTrace Ethernet. Includes LA-3873 (Conv. AUTO26 to JTAG14 OnCE) Voltage range 0.9V to 5.5V

Preprocessor for TriCore AGBT/SGBT Trace (Aurora high-speed trace). Full support via PowerTrace III and PowerTrace II with the following speed per lane: 4 lanes @ 4.25 Gbps, 3 lanes @ 6.00 Gbps, 2 lanes @ 6.25 Gbps, 1 lane @ 6.25 Gbps. Limited support via PowerTrace PX and PowerTrace Ethernet. with the following speed per lane: 4 lanes @ 1.25 Gbps, 2 lanes @ 2.50 Gbps. PowerTrace Ethernet must have serial number E04xxxxxxxx or higher. Voltage range 0.15V to 1.25V.