Search results for "la-2732"

Converter from IDC20A to 12 pin PMOD connectors with the JTAG pinout from SiFive. The adapter exists in two variants: with male and female PMOD connector. This adapter has the female PMOD connector. PMOD is an open standard defined by Digilent for peripherals used with FPGAs or microcontrollers. The PMOD pinout of this adapter does ONLY work with targets that use the pinout that was defined by SiFive. So it is not a general/official RISC-V pinout. In case of FPGA boards, the pinout may depend on the used FPGA image.

Converter from Samtec40 HSSTP to USB Type-C (UFP DAM, SWD on D1) for debugging and tracing. This device only provides pin conversion and does not support the USB protocol. E.g. for NVIDIA Orin

Converter from a MIPI20T to a MIPI34 connector, designed to connect a MIPI20T-HS Whisker (from a CombiProbe or MicroTrace) to a target with MIPI34 connector. Can be used for debugging with optional 4-bit trace if a MIPI34 connector is mounted on the target. There is a pin header to optionally receive trace signals from elsewhere. Can be used to connect the debug signals of a MIPI20T-HS Whisker to an AUTOFOCUS II MIPI preprocessor or a PowerTrace Serial.

Converter from a MIPI20T to a MIPI60 connector, designed to connect a MIPI20T-HS Whisker (from a CombiProbe or MicroTrace) to a target with MIPI60 connector. Can be used for debugging with optional 4-bit trace if a MIPI60 connector is mounted on the target.

Converter from a MIPI20T to a MICTOR38 connector with ETM pin-out, designed to connect a MIPI20T-HS Whisker (from a CombiProbe or MicroTrace) to a target with MICTOR38 connector. Can be used for debugging with optional 4-bit trace if a MICTOR38 connector with 4-bit ETM pin-out is mounted on the target.

Converter from a MIPI20T to a TI-14 debug connector, designed to connect the debug lines of a MIPI20T-HS Whisker (from a CombiProbe or MicroTrace) to a target with TI-14 connector. Can be used for debugging if a TI-14 connector is mounted on the target, which is used on many targets with processors from Texas Instruments. There is a pin header to optionally receive trace signals from elsewhere.

Supports dsPIC33C (0.9 V - 5.5 V) Debugging of dual-core dsPIC requires LA-2762 Package for CombiProbe 2 dsPIC Dual Core Includes software for Windows, Linux and macOS. Requires Power Debug Interface USB 2.0/USB 3.0, Power Debug Ethernet, Power Debug II, PowerDebug PRO, PowerDebug E40 or PowerDebug X50

IDC20A debug cable with 20 pin connector to support MicroBlaze cores. Includes software for Windows, Linux and macOS. Requires PowerDebug module. You may want to add one the following converters: LA-3881 Converter IDC20A to XILINX-14 if a 14-pin Xilinx connector is used LA-3860 Converter IDC20A to PPC4xx-16 if a 16-pin PPC4xx connector is used

Upgrade from debug cable with 16 pins (PPC16) to IDC20A debug cable with 20 pins for MicroBlaze Please add the base serial number of your old debug cable to your order. Your old debug cable must be returned on receipt of the new one. Includes 1 year software guarantee.

Trace license to support CoreSight Trace for Xtensa, applicable to AutoFocus II or serial preprocessor or a PowerTrace Serial. If the license is applied to an AutoFocus II preprocessor, the preprocessor must have a base serial number of C1210xxxxxxx or higher. Please add the base serial number of your existing AutoFocus II preprocessor, serial preprocessor or PowerTrace Serial to your order.