Search results for "cortex-r5"

Debugger for Cortex-A/R (Armv7 32-bit) IN PRODUCT CATALOG
LA-7843 | Out of production

Supports Armv7-A/R based Cortex-A and Cortex-R 32-bit cores supports 5-pin standard JTAG, cJTAG and Serial Wire Debug Port (0.4 V - 5 V) includes software for Windows, Linux and MacOSX requires Power Debug Module cJTAG and SWD require Power Debug Interface USB 2.0/USB 3.0, Power Debug Ethernet, PowerTrace, Power Debug II or PowerDebug PRO

Debugger for Cortex-A/R (Armv8 and Armv9) IN PRODUCT CATALOG
LA-3743 | Out of production

Supports Armv8-A/R or Armv9-A/R based Cortex-A and Cortex-R 32/64-bit cores IDC20A debug cable supports 5-pin standard JTAG, cJTAG and Serial Wire Debug Port, (0.4 V - 5 V) Multicore debugging included includes software for Windows, Linux and MacOSX requires Power Debug Module cJTAG and SWD require Power Debug Interface USB 2.0/USB 3.0, Power Debug Ethernet, PowerTrace, Power Debug II or PowerDebug PRO

Debugger Cortex-A/R (Armv7) IDC20A (PACK) IN PRODUCT CATALOG
LA-3253

Supports Armv7-A/R based Cortex-A and Cortex-R 32-bit cores GTM and IPU debugging included IDC20A debug cable supports 5-pin standard JTAG, cJTAG and Serial Wire Debug Port, (0.4V - 5V) Includes software for Windows, Linux and macOS cJTAG and SWD require PowerDebug Interface USB 2.0/USB 3.0, PowerDebug Ethernet, PowerTrace, PowerDebug II PowerDebug PRO, PowerDebug E40 or PowerDebug X50

Debugger for 78K0R/RL78 IDC20A (PACK) IN PRODUCT CATALOG
LA-3213

Supports 78K0R and RL78 cores (16-bit). Uses IDC20A debug cable, which supports 5-pin standard JTAG, cJTAG (IEEE 1149.7) and Serial Wire Debug (SWD), (0.4V - 5V) Includes software for Windows, Linux and macOS. Requires PowerDebug base module. Not supported are the very old 1st Gen. PowerDebug modules LA-7702 (without USB) and LA-7704 (with USB 1.1).

Debugger for Armv8/Armv9 IDC20A (PACK) IN PRODUCT CATALOG
LA-3255

Supports Armv8 and Armv9 based Cortex-A, Cortex-R, Cortex-X and Neoverse 32/64-bit cores GTM, SPT, IPU and Multicore debugging included IDC20A debug cable supports 5-pin standard JTAG, cJTAG and Serial Wire Debug Port, (0.4V - 5V) Includes software for Windows, Linux and macOS cJTAG and SWD require PowerDebug Interface USB 2.0/USB 3.0, PowerDebug Ethernet, PowerTrace, PowerDebug II PowerDebug PRO, PowerDebug E40 or PowerDebug X50

CombiProbe 2 for MIPI20T-HS (PACK) IN PRODUCT CATALOG
LA-3080

CombiProbe 2 with MIPI20-HS whisker for debugging and tracing. Voltage range: 1.2V...5.0V. Trace memory: 512 MByte. Maximum trace port width: 4 pins. Maximum trace bandwidth: 400 MBit/s per trace pin. Requires at least one of the following A-licenses: LA-3743A Debug. for Cortex-A/R (Armv8 and Armv9) Add. LA-7844A Debug Cortex-M (Armv6/7/8 32-bit) Add. LA-7843A Debug Cortex-A/-R (Armv7 32-bit) Add. LA-7765A JTAG Debugger License for Arm11 Add. LA-7742A JTAG Debugger License for Arm9 Add. LA-7746A JTAG Debugger License for Arm7 Add. LA-2540A Debugger for RISC-V 32-bit Add. LA-2541A Debugger for RISC-V 64-bit Add. Requires trace license LA-7970X for on-chip ETM traces of Cortex-A/R. Requires trace license LA-2767X for RISC-V off-chip traces emitted via a 4-bit Pin Interface Block (PIB). Requires Power Debug Interface USB 3.0,PowerDebug II, PowerDebug PRO, PowerDebug E40 or PowerDebug X50. Extend your CombiProbe with a Mixed-Signal Probe (LA-2500), to record and correlate digital and analog signals.

JTAG Debugger License for AndeStar Add. IN PRODUCT CATALOG
LA-3756A

supports AndeStar (0.4 V - 5 V) Extension applicable to the following debug cables (purchased separately): for LA-7746 (JTAG Debugger for ARM7) for LA-7742 (JTAG Debugger for ARM9) for LA-7744 (JTAG Debugger for ARM10) for LA-7765 (JTAG Debugger for ARM11) for LA-7843 (JTAG Debugger for Cortex-A/-R (ARMv7)) for LA-7844 (JTAG Debugger for Cortex-M) please add the serial number of the existing debug cable to your order

Package for CombiProbe 2 ARM IN PRODUCT CATALOG
LA-4597 | Out of production

Debug cable and 512 MByte of trace memory Supports Standard-JTAG, cJTAG and Serial Wire Debug Port Bandwidth of 400 MBit/s per trace channel requires at least one of the following A-licenses: LA-3743A Debug. for Cortex-A/R (Armv8 and Armv9) Add. LA-7742A (JTAG Debugger License for ARM9 Add.) LA-7746A (JTAG Debugger License for ARM7 Add.) LA-7765A (JTAG Debugger License for ARM11 Add.) LA-7843A (JTAG Debugger License for CORTEX-A Add.) LA-7844A (JTAG Debugger License for CORTEX-M Add.) Trace support (up to 4-bit) included: - MIPI System Trace - ITM via Serial Wire Output/TPIU - ETM Cortex-M continuous mode via TPIU Supports the following trace licenses: LA-7970X (Trace License for the ARM Architecture) requires Power Debug Interface USB 3.0, Power Debug II or Power Debug PRO 5V tolerant inputs; max. output level 3.3V

CombiProbe 2 for AUTO26 (PACK) IN PRODUCT CATALOG
LA-3081

CombiProbe 2 with AUTO26 whisker for debugging and DAP Streaming. 512 MByte trace memory. 26-pin Automotive Connector. Supports - DAP (DAP2, DAP3, DAPWide, DAP4): up to 160 MHz, 3.3 V or 5.0 V - JTAG: 1.8-5.0 V, up to 60 MHz - DXCPL DAP streaming requires a DAP mode. For performance reasons, we recommend DAPWide at 160 MHz. Requires the following A-license: LA-7756A (Debugger for TriCore Standard Additional). Trace analysis and display requires LA-3799X (Trace License for TriCore ED). Requires Power Debug Interface USB 3.0,PowerDebug II, PowerDebug PRO, PowerDebug E40 or PowerDebug X50. Extend your CombiProbe with a Mixed-Signal Probe (LA-2500), to record digital and analog signals and correlate them with MCDS DAP streaming. (Requires PowerView R.2024.02 or higher)

CombiProbe 2 for MIPS32+4-Bit IFLOW (PACK) IN PRODUCT CATALOG
LA-3082

CombiProbe 2 to debug and trace MIPS32 CPUs with 4 Bit IFLOW trace. Trace memory: 512 MByte. Maximum trace port width: 4 pins. Maximum trace bandwidth: 200 MBit/s per trace pin. MIPI34 connector with included adapter for eJTAG and IFLOW connector. 5V tolerant inputs; max. output level 3.3V. Requires the following A-license: LA-7760A (JTAG Debugger for MIPS32). 4-Bit IFlow program trace requires: LA-7971X (Trace License for the MIPS32). Requires TRACE32 Software R.2022.02 (build 142224) or newer. Requires Power Debug Interface USB 3.0, PowerDebug II, PowerDebug PRO, PowerDebug E40 or PowerDebug X50. Extend your CombiProbe with a Mixed-Signal Probe (LA-2500), to record and correlate digital and analog signals.