Product Catalogue
Find TRACE32 product
Converter to connect an AutoFocus II Preprocessor with MICTOR-38 and an IDC20A Debug Cable to MIPI-10/-20/-34. Enables the AutoFocus II Preprocessor to receive trace data from the 4-bit wide trace port of a MIPI-34 target connector. The converter is configured for MIPI-34 via 0 Ohm resistors. By soldering the resistors differently MIPI-20T can be supported as well. You can get the same converter pre-configured for MIPI-20T by ordering LA-3809 Converter Mictor-38/IDC20A to MIPI-20T.
Converter 26-pin Automotive Debug Cable to 10-pin JTAG half-size (Automotive, ECU14) for LA-3203 (Debugger for TriCore AUTO26 (PACK)) LA-3205 (Debugger for RH850/V850 AUTO26 (PACK)) LA-3206 (Debugger for MPC5xxx AUTO26 (PACK)) LA-2707 (Debugger for TriCore Automotive PRO) LA-2708 (Debugger for MPC5xxx Automotive PRO) LA-2709 (Debugger for RH850/V850 Automotive PRO) LA-2713 (Debug-Bundle MPC5xxx/TriCore Automotive PRO) LA-2714 (Debug-Bundle TriCore/RH850 Automotive PRO) LA-3736 (JTAG Debugger for MPC5xxx Automotive) LA-3737 (JTAG Debugger for TriCore Automotive) LA-3738 (Debugger-Bundle MPC5xxx/TriCore Automotive) LA-3739 (Debugger for RH850/V850 Automotive) LA-3753 (Debugger-Bundle TriCore/RH850 Automotive) Converter 14-pin OnCE-PPC to 10-pin JTAG half-size (Automotive, ECU14) for LA-7753 (JTAG Debugger for MPC55xx/MPC56xx) Converter 16-pin TriCore to 10-pin JTAG half-size (Automotive, ECU14) also supporting DAP (2-wire) for LA-7756 (OCDS Debugger for TriCore)
supports Teaklite-4 interface includes software for Windows, Linux and MacOSX requires Power Debug Module debug cable with 20 pin connector
supports Teaklite-4 includes software for WINDOWS, HLL debugger Extension applicable to the following debug cables with serial number C0808xxxxxxx or higher please add the serial number of the existing debug cable to your order
supports TEAKLITE-4 requires a debug cable with serial number C0808xxxxxxx or higher requires a valid software guarantee or a valid software license key please add the serial number of the existing debug cable to your order
Converter to connect an ARM Preprocessor (16-bit PTM) to the OMAP5432 EVM (successor of the PandaBoard).
Converter 16-pin JTAG (TriCore) to 26-pin Automotive Debug Cable also supporting DAP (2-wire) for LA-7756 (OCDS Debugger for TriCore)
Converter 26-pin Automotive Debug Cable to 16-pin JTAG (TriCore) also supporting DAP (2-wire) for LA-2707 Debugger for TriCore Automotive PRO LA-3203 Debugger for TriCore AUTO26 (PACK) LA-3737 JTAG Debugger for TriCore Automotive
Converter from Beyond (20-pin) to NXP/Jennic (10-pin) LA-3793 (JTAG Debugger for Beyond)
Connector for Intel MIPI60 Converged on target to - Whisker MIPI60-Q for Quad-Probe x86/x64 - Prepro. for Intel® PT AUTOFOCUS MIPI60-P Connector for Intel MIPI60 Converged on target to - Whisker MIPI60-Cv2 for CombiProbe - Prepro. for Intel® PT AUTOFOCUS MIPI60-P
Converter to connect a Debug Cable to 10/20/34 pin connectors specified by MIPI.
Converter to connect a RH850 HSTP Aurora Preprocessor to the Renesas Evalboard: RH850-CCC-404PIN-PB-T1-V1
SABRE-AI to TRACE32 ADAPTER BOARD Convert Mictor38 to SABRE-AI Target Board
Converter for RH850-Samtec34 pinassignment to a target with a Samtec46 debug/trace connector.
State-Timing Analyzer to record digital or analog signal via suitable probes. Records up to 102 (51) channels, 200 (400) MHz state, 250 (500) MHz timing, transient recording, 64 MFrames, 48-bit time-stamp, trigger, filter, trigger Delay, etc. This is an extension that attaches to an existing PowerDebug X50, PowerDebug PRO, or PowerDebug II. Available probes: LA-7945 Standard Probe (17 digital single-ended signals) LA-7944 Mictor Probe (34 digital single-ended signals) LA-7946 Samtec Probe (34 digital single-ended signals) LA-7947 Mictor Differential Probe (17 digital differential signals) LA-7954 Mictor Probe with differential clock (32 se + 1 diff signal) LA-7958 Samtec Probe with differential clock (32 se + 1 diff signal) LA-7961 USB2 Probe LA-7943 DigRF Probe Set LA-7949 Analog Probe
State-Timing Analyzer to record digital or analog signal via suitable probes. Records up to 102 (51) channels, 200 (400) MHz state, 250 (500) MHz timing, transient recording, 128 MFrames, 48-bit time-stamp, trigger, filter, trigger Delay, etc. This is an extension that attaches to an existing PowerDebug X50, PowerDebug PRO, or PowerDebug II. Available probes: LA-7945 Standard Probe (17 digital single-ended signals) LA-7944 Mictor Probe (34 digital single-ended signals) LA-7946 Samtec Probe (34 digital single-ended signals) LA-7947 Mictor Differential Probe (17 digital differential signals) LA-7954 Mictor Probe with differential clock (32 se + 1 diff signal) LA-7958 Samtec Probe with differential clock (32 se + 1 diff signal) LA-7961 USB2 Probe LA-7943 DigRF Probe Set LA-7949 Analog Probe
State-Timing Analyzer to record digital or analog signal via suitable probes. Records up to 102 (51) channels, 200 (400) MHz state, 250 (500) MHz timing, transient recording, 256 MFrames, 48-bit time-stamp, trigger, filter, trigger Delay, etc. This is an extension that attaches to an existing PowerDebug X50, PowerDebug PRO, or PowerDebug II. Available probes: LA-7945 Standard Probe (17 digital single-ended signals) LA-7944 Mictor Probe (34 digital single-ended signals) LA-7946 Samtec Probe (34 digital single-ended signals) LA-7947 Mictor Differential Probe (17 digital differential signals) LA-7954 Mictor Probe with differential clock (32 se + 1 diff signal) LA-7958 Samtec Probe with differential clock (32 se + 1 diff signal) LA-7961 USB2 Probe LA-7943 DigRF Probe Set LA-7949 Analog Probe
Preprocessor for RH850 with serial Nexus trace interface including Samtec 40-pin flex extension cable requires PowerTrace II Supported speeds per lane: 4 lanes at 4.25Gbps 3 lanes at 6.0Gbps 2 lanes at 6.25Gbps 1 lane at 6.25Gbps LA-3303 PowerTrace Serial 4 GigaByte RH850 Supports 8 lanes at 12.5Gbps voltage range 0.15V to 1.25V
Supports RH850 Aurora NEXUS (high-speed trace port) requires serial preprocessor hardware newer than 08/12 (serial number >= C12080164145) please add the serial number of the serial preprocessor to your order