Search results for "n10"
610 mm flex extension 60 pin SAMTEC QTH-QSH, e.g. WHISKER-QP-MIPI60-QL LA-4612 e.g. Tricore with SAMTEC QTH connector LA-7928 e.g. ARM-ETM/AUTOFOCUS 600 MIPI LA-7993 e.g. Preprocessor for Intel® PT AUTOFOCUS MIPI60 LA-3907 similar in design as LA-1228, LA-1238, and LA-1248
Converter 16 Pin JTAG to 10 Pin Half-Size-Connector DAP Interface for TriCore / XC2000 requires LA-7759 (OCDS Debugger for XC2000/C166S V2) or LA-7756 (OCDS Debugger for TriCore)
Converter SiFive PIB for PMOD to ribbon cable. PIB stands for "Probe Interface Block", which is an external parallel trace interface specified by SiFive for RISC-V trace. Use this converter togehter with LA-2730 (Converter MIPI-20T to IDC20A) and LA-3080 (CombiProbe 2 for MIPI20T-HS (PACK)) to receive RISC-V trace from a PMOD connector via a CombiProbe. This converter adapts from SiFive's 2x6 PMOD pin layout for PIB to the Lauterbach 10pin (2x5) ribbon cable. The other side of the 10pin ribbon cable is usally conntected to the Lauterbach converter LA-2730 (MIPI-20T to IDC20A).
supports C166S V2, XC16x, XE166, XC2000, X-GOLD102 includes software for Windows, Linux and MacOSX requires Power Debug Module supports 16-pin standard JTAG 10-pin DAP interface requires LA-3815 and debug cable with serial number higher than C0809xxxxxxx
supports PowerQuiccIII (MPC85XX) and QorIQ 32-bit with e500 core (P10XX, P2010, P2020, BSC9xxx) includes software for Windows, Linux and MacOSX requires Power Debug Module debug cable with 16 pin connector Concurrent debugging of two or more cores in multicore chip requires a License for Multicore Debugging (LA-7960X)
Preprocessor for ARM7/ARM9/ARM10/ARM11 Embedded Trace Macrocell (ETM), connector cable and software, 120 MHz clock speed, 4 x Trace-Depth, 2.5V-3.3V support all ETM modes, with 2 Mictor connectors 2 mictor flex cables included support max. 32 bit trace port size
Converter 26-pin Automotive Debug Cable to 10-pin JTAG half-size (Automotive, ECU14) for LA-3203 (Debugger for TriCore AUTO26 (PACK)) LA-3205 (Debugger for RH850/V850 AUTO26 (PACK)) LA-3206 (Debugger for MPC5xxx AUTO26 (PACK)) LA-2707 (Debugger for TriCore Automotive PRO) LA-2708 (Debugger for MPC5xxx Automotive PRO) LA-2709 (Debugger for RH850/V850 Automotive PRO) LA-2713 (Debug-Bundle MPC5xxx/TriCore Automotive PRO) LA-2714 (Debug-Bundle TriCore/RH850 Automotive PRO) LA-3736 (JTAG Debugger for MPC5xxx Automotive) LA-3737 (JTAG Debugger for TriCore Automotive) LA-3738 (Debugger-Bundle MPC5xxx/TriCore Automotive) LA-3739 (Debugger for RH850/V850 Automotive) LA-3753 (Debugger-Bundle TriCore/RH850 Automotive) Converter 14-pin OnCE-PPC to 10-pin JTAG half-size (Automotive, ECU14) for LA-7753 (JTAG Debugger for MPC55xx/MPC56xx) Converter 16-pin TriCore to 10-pin JTAG half-size (Automotive, ECU14) also supporting DAP (2-wire) for LA-7756 (OCDS Debugger for TriCore)
Converter from 14 Pin JTAG/OnCE MPC5XXX to AUTO26/20/10 use with LA-7753 JTAG Debugger Qorivva MPC5xxx/SPC5xxx (ICD) to connect to targets designed for LA-2708 (Debugger for MPC5xxx Automotive PRO) LA-3206 Debugger for MPC5xxx AUTO26 (PACK) LA-3736 (JTAG Debugger for MPC5xxx Automotive)
AUTO26 Whisker for CombiProbe suitable for TriCore and dsPIC with 26-pin automotive connector, supporting DAP (DAP2, DAP3, DAP4, DAPWide), JTAG, DXCPL/DXCM. For optimal performance, we recommend using a DAP mode. DAP streaming is supported for TriCore (in DAP mode) and works most effectively with DAPWide (up to 320 Mbit/s). For DXCPL/DXCM, you will likely require the CAN-Box (LA-3889) as well. Voltage Range: 1.8V to 5.0V. Debug Clock Frequency: 10 kHz to 160 MHz Target Connector: AUTO26, AUTO20, AUTO10 Requires a CombiProbe or CombiProbe 2. For dsPIC only JTAG is supported and the converter LA-2773 to the 8-pin Microchip connector is recommended. Please note that TriCore SoCs usually support only 3.3V or 5V in DAP mode. Debug clock frequency in JTAG mode is typically limited to 40 MHz on TriCore SoCs (while up to 160 MHz is supported in DAP mode).
supports AndeStar (0.4 V - 5 V) Extension applicable to the following debug cables (purchased separately): for LA-7746 (JTAG Debugger for ARM7) for LA-7742 (JTAG Debugger for ARM9) for LA-7744 (JTAG Debugger for ARM10) for LA-7765 (JTAG Debugger for ARM11) for LA-7843 (JTAG Debugger for Cortex-A/-R (ARMv7)) for LA-7844 (JTAG Debugger for Cortex-M) please add the serial number of the existing debug cable to your order