Product Catalogue

Converter from IDC20A connector to Altera 10-pin (Byteblaster) or RISC-V 10-pin Target connector pitch can be 2.54mm or 1.27mm (half size)

Adapter 10 pin 100 mil to 50 mil with cable

Supports ARM10. Multicore debugging included. Requires a valid software guarantee or a valid software maintenance key. Please add the serial number of the existing debug cable to your order.

Converter 20 pin JTAG ARM to UBI32-10

supports ARM10 please add the serial number of the existing debug cable to your order

supports ARM10 (0.4 V - 5 V) supports 5-pin standard JTAG, cJTAG and Serial Wire Debug Port includes software for Windows, Linux and MacOSX requires Power Debug Module cJTAG and SWD require Power Debug Interface USB 2.0/USB 3.0, Power Debug Ethernet, PowerTrace, Power Debug II or PowerDebug PRO

Replacement part 5 cm Half Size Adapter (LA-2103)

Adapter 10 pin for M32R only for LA-7661 (Debug Adapter for M32R SDI-3)

support 80C166, C165, C167, PMB2705 GOLD, ST10, includes HLL debugger, operation system, includes software for Windows

Replacement part 50 mm Automotive Debug Cable 26 to 10 pin for LA-2707 (Debugger for TriCore Automotive PRO) LA-2708 (Debugger for MPC5xxx Automotive PRO) LA-2709 (Debugger for RH850/V850 Automotive PRO) LA-3203 (Debugger for TriCore AUTO26 (PACK)) LA-3205 (Debugger for RH850/V850 AUTO26 (PACK)) LA-3206 (Debugger for MPC5xxx AUTO26 (PACK)) LA-3736 (JTAG Debugger for MPC5xxx Automotive) LA-3737 (JTAG Debugger for TriCore Automotive)

Converter to connect a Debug Cable to 10/20/34 pin connectors specified by MIPI.

Converter to connect an IDC20A debug cable to a target with MIPI34, MIPI20D, or MIPI10 connector. For connecting an IDC20A debug cable on a PowerTrace Serial use the converter LA-2770 instead. (LA-2770 is for a MIPI34 connector with pin 1 on the right sight, while LA-3770 expects pin 1 on the left side at the target.)

Adapter 10 pin 100 mil to 50 mil for M32R only for LA-7661 (Debug Adapter for M32R SDI-3)

Converter IDC20A or MIPI-20 to 10-pin ECU14

Converter 16 Pin JTAG to 10 Pin Half-Size-Connector for BOSCH MEDC17 requires LA-7756 (OCDS Debugger for TriCore)

JTAG Converter 26-pin Automotive Debug Cable (PPC/ TriCore/RH850) to 10-pin ECU14 for LA-3203 (Debugger for TriCore AUTO26 (PACK)) LA-3205 (Debugger for RH850/V850 AUTO26 (PACK)) LA-3206 (Debugger for MPC5xxx AUTO26 (PACK)) LA-2707 (Debugger for TriCore Automotive PRO) LA-2708 (Debugger for MPC5xxx Automotive PRO) LA-2709 (Debugger for RH850/V850 Automotive PRO) LA-2713 (Debug-Bundle MPC5xxx/TriCore Automotive PRO) LA-2714 (Debug-Bundle TriCore/RH850 Automotive PRO) LA-3736 (JTAG Debugger for MPC5xxx Automotive) LA-3737 (JTAG Debugger for TriCore Automotive) LA-3738 (Debugger-Bundle MPC5xxx/TriCore Automotive) LA-3739 (Debugger for RH850/V850 Automotive) LA-3753 (Debugger-Bundle TriCore/RH850 Automotive)

Converter from MIPI10 to USB Type-C (UFP DAM, SWD on D1) for debugging. This device only provides pin conversion and does not support the USB protocol. E.g. for NVIDIA Orin

Replacement part 50 mm for CombiProbe Arm

Replacement part 50 mm used for LA-4503 and LA-4513.

Converter from IDC20A connector to MCHP FlashPro socket Target connector pitch can be 2.54mm or 1.27mm (half size) Usable for PolarFire SoC Icicle Kit