Search results for "microtrace"
Wall Mount Power Supply for AU Sockets for Power DebugModule USB, PowerDebug E40 and MicroTrace
Wall Mount Power Supply for CN Sockets for Power DebugModule USB, PowerDebug E40 and MicroTrace
Upgrade to MIPI20T-HS Whisker for CombiProbe/MicroTrace. Your old MIPI34 Whisker must be returned on receipt of the replacement MIPI20T-HS Whisker.
Probe to record analog signals from a 20 pin IDC connector: 4 Channels 0..5 V 12 Bit Resolution, 3 Current Sense Channels, Conversion Rate 625K Samples/Sec. The probe requires one of the following modules. PowerIntegrator (LA-7940), PowerIntegrator II (LA-3940/3941/3942), PowerTrace II (LA-7692/7693/7694), PowerTrace Serial (LA-3120/3520/3555/3560). CombiProbe (LA-4502), CombiProbe 2 (LA-3060) and MicroTrace (LA-3050). For CombiProbe, CombiProbe 2 and MicroTrace the converter LA-4508 is required. For CombiProbe 2 and MicroTrace we recommend to use the Mixed-Signal Probe (LA-2500) instead of this analog probe. The probe is not suitable for PowerTrace III (LA-2520/2521), PowerTrace II Lite (LA-3580/3581), PowerTrace Serial 2 (LA-3121/3122). For those devices, you can use the Mixed-Signal Probe (LA-2500) instead (except for PowerTrace II Lite). Includes a 20 pin male-male adaptor.
Converter from a MIPI20T to a MIPI60 connector, designed to connect a MIPI20T-HS Whisker (from a CombiProbe or MicroTrace) to a target with MIPI60 connector. Can be used for debugging with optional 4-bit trace if a MIPI60 connector is mounted on the target.
Converter from a MIPI20T to a MICTOR38 connector with ETM pin-out, designed to connect a MIPI20T-HS Whisker (from a CombiProbe or MicroTrace) to a target with MICTOR38 connector. Can be used for debugging with optional 4-bit trace if a MICTOR38 connector with 4-bit ETM pin-out is mounted on the target.
Converter from a MIPI20T to a TI-14 debug connector, designed to connect the debug lines of a MIPI20T-HS Whisker (from a CombiProbe or MicroTrace) to a target with TI-14 connector. Can be used for debugging if a TI-14 connector is mounted on the target, which is used on many targets with processors from Texas Instruments. There is a pin header to optionally receive trace signals from elsewhere.
Converter from a MIPI20T to an IDC20A debug connector, designed to connect the debug signals of a MIPI20T-HS Whisker (from a CombiProbe or MicroTrace) to a target with IDC20A connector. Can be used for debugging if an IDC20A connector is mounted on the target, which is used on many targets with Arm SoCs or Arm-compatible SoCs. There is a pin header to optionally receive trace signals from elsewhere.
Converter from a MIPI20T to a MIPI34 connector, designed to connect a MIPI20T-HS Whisker (from a CombiProbe or MicroTrace) to a target with MIPI34 connector. Can be used for debugging with optional 4-bit trace if a MIPI34 connector is mounted on the target. There is a pin header to optionally receive trace signals from elsewhere. Can be used to connect the debug signals of a MIPI20T-HS Whisker to an AUTOFOCUS II MIPI preprocessor or a PowerTrace Serial.
Probe to record digital signals from a 20 pin IDC connector: 17 Channels (16 Data, 1 Clock), 0..5 V Input, 4 pF, 50 KOhm. The probe requires one of the following modules. PowerIntegrator (LA-7940), PowerIntegrator II (LA-3940/3941/3942), PowerTrace II (LA-7692/7693/7694), PowerTrace Serial (LA-3120/3520/3555/3560). The probe is not suitable for PowerTrace III (LA-2520/2521), PowerTrace II Lite (LA-3580/3581), PowerTrace Serial 2 (LA-3121/3122), CombiProbe 2 (LA-3060) and MicroTrace (LA-3050). For those devices, you can use the Mixed-Signal Probe (LA-2500) instead (except for PowerTrace II Lite). Includes a 20 pin male-male adaptor.