Product Catalogue
Find TRACE32 product
Allows the concurrent debugging of 2 or more identical cores Please add the base serial number of your MicroTrace to your order
Converter CombiProbe/MicroTrace to LA-7949 Analog Probe for PowerIntegrator
All-In-One Debug and Trace Solution for Arm Cortex-M. Supports 5-pin standard JTAG, cJTAG and Serial Wire Debug Port for Arm Cortex-M cores and SecurCore SC000/SC300 Includes 256-MByte of trace RAM to support: - ITM via Serial Wire Output/TPIU - ETM Cortex-M continuous mode via TPIU (4-bit) Bandwidth of 400 MBit/s per trace channel. Trace Streaming up to 100 MByte/s requires USB 3.0 (SuperSpeed) capable host computer Concurrent debugging of two or more Cortex-M cores requires a License for Multicore Debugging MicroTrace (LA-7960N) Can not be upgraded to include support for other core architectures. Extend your MicroTrace with a Mixed-Signal Probe (LA-2500), to record and correlated digital and analog signals.
Supports RISC-V 32-bit cores Only sold as part of a package for MicroTrace for RISC-V 32-Bit
Debug solution for RISC-V 32-bit standard core(s). Concurrent debugging of two or more RISC-V 32-bit standard cores requires a License for Multicore Debugging MicroTrace (LA-7960N). Can not be upgraded to include support for other core architectures.
This TRACE32 Product is a license carrier. It requires a suitable, programmed TRACE32 A-license.
MIPI20T-HS Whisker for the use with CombiProbe and MicroTrace. Voltage range: 1.2V...5.0V. Maximum trace port width: 4 pins. Maximum trace bandwidth: 400 MBit/s per trace pin.
Digital/Analog probe with 40-pin connector for LA-3204 MicroTrace for Cortex-M (PACK) LA-3080 CombiProbe 2 for MIPI20T-HS (PACK) LA-3081 CombiProbe 2 for AUTO26 (PACK) LA-3082 CombiProbe 2 for MIPS32+4-Bit IFLOW (PACK) LA-3083 CombiProbe 2 for MIPI34 (PACK) LA-2520 / LA-2521 PowerTrace III LA-3121 / LA-3122 PowerTrace Serial 2 Characteristics of digital probe: 12 channels (12 data), 0..5 V Input, 200 MSamples per channel. Characteristics of analog probe: 6 Channels -12V..+12V 13 bit resolution, 2 current sense channels, Conversion rate 1 MSample/s. Requires TRACE32 software DVD 2021/02 or newer. Recommended accessories: LA-6470 Clip Set (Cable and Clips)
Supports Arm Arm Cortex-M cores and SecurCore SC000/SC300 trace support ETM Cortex-M included Only sold as part of a package for MicroTrace Cortex-M
for Power DebugModule USB, PowerDebug E40 and MicroTrace
Wall Mount Power Supply for IN Sockets for Power DebugModule USB, PowerDebug E40 and MicroTrace
Wall Mount Power Supply for UK Sockets for Power DebugModule USB, PowerDebug E40 and MicroTrace
Wall Mount Power Supply for EU Sockets for Power DebugModule USB, PowerDebug E40 and MicroTrace
Wall Mount Power Supply for US Sockets for Power DebugModule USB, PowerDebug E40 and MicroTrace
Wall Mount Power Supply for AU Sockets for Power DebugModule USB, PowerDebug E40 and MicroTrace
Wall Mount Power Supply for CN Sockets for Power DebugModule USB, PowerDebug E40 and MicroTrace
Upgrade to MIPI20T-HS Whisker for CombiProbe/MicroTrace. Your old MIPI34 Whisker must be returned on receipt of the replacement MIPI20T-HS Whisker.
Probe to record analog signals from a 20 pin IDC connector: 4 Channels 0..5 V 12 Bit Resolution, 3 Current Sense Channels, Conversion Rate 625K Samples/Sec. The probe requires one of the following modules. PowerIntegrator (LA-7940), PowerIntegrator II (LA-3940/3941/3942), PowerTrace II (LA-7692/7693/7694), PowerTrace Serial (LA-3120/3520/3555/3560). CombiProbe (LA-4502), CombiProbe 2 (LA-3060) and MicroTrace (LA-3050). For CombiProbe, CombiProbe 2 and MicroTrace the converter LA-4508 is required. For CombiProbe 2 and MicroTrace we recommend to use the Mixed-Signal Probe (LA-2500) instead of this analog probe. The probe is not suitable for PowerTrace III (LA-2520/2521), PowerTrace II Lite (LA-3580/3581), PowerTrace Serial 2 (LA-3121/3122). For those devices, you can use the Mixed-Signal Probe (LA-2500) instead (except for PowerTrace II Lite). Includes a 20 pin male-male adaptor.
Converter from a MIPI20T to a MIPI60 connector, designed to connect a MIPI20T-HS Whisker (from a CombiProbe or MicroTrace) to a target with MIPI60 connector. Can be used for debugging with optional 4-bit trace if a MIPI60 connector is mounted on the target.