Search results for "am3352"
Serial Trace Port Controller with 4 Giga Byte Trace Memory for ARM-ETM requires PowerDebug II Ethernet or PowerDebug PRO requires accessories as LA-3521 or LA-3522 Host requirements: USB 3.0 or 1000 MBit Ethernet interface, 4.0 GigaByte RAM voltage range 0.15V to 1.25V
Active slot card adapter for 1-lane PCIe. Converts standard PCIe slot card format to 80pin ERF8 for PowerTrace Serial. Pinout conform to PCI-Express x1 Connector Pin-Out. Requires the following items: * LA-1239 Flex Ext. for SAMTEC 80 pin ERM8-ERM8 500mm A * LA-3550X License for PCI Express * PowerTrace Serial with suitable trace deocder license * PowerDebug X50, PRO or II * Suitable Debug Cable with suitable debug license
Flex cable and converter to debug and trace Arm chips, which emit an ETM trace via up to 6 HSSTP lanes.
Flex cable and converter to trace Arm chips, which emit an ETM trace via up to 8 HSSTP lanes. For chips with 6 or less HSSTP lanes we recommend to use LA-3521 instead.
Trace recorder for serial high-speed ports with 8 Gigabyte trace memory for RH850 Records up to 8 lanes with 12.5 Gbit/s per lane (more with opt. Prepro.) Voltage range: 0.15 to 1.25 differential voltage. Includes converter and flex-extension for Samtec34 target connector. Requires PowerDebug X50, PowerDebug PRO, or PowerDebug II. Requires PC with USB 3 or Gigabit Ethernet, 4 GB RAM min, and 64-bit OS.
Active slot card adapter for up to 4-lanes PCIe. Converts standard PCIe slot card format to 80pin ERF8 for PowerTrace Serial. Pinout conform to PCI-Express x4 Connector Pin-Out. Requires the following items: * LA-1239 Flex Ext. for SAMTEC 80 pin ERM8-ERM8 500mm A * LA-3550X License for PCI Express * PowerTrace Serial with suitable trace deocder license * PowerDebug X50, PRO or II * Suitable Debug Cable with suitable debug license
Trace recorder for serial high-speed ports with 8 Gigabyte trace memory for RISC-V Tested for SiFive Nexus IP. Tested for Tessent Embedded Analytics (aka. UltraSoC) encoder IP Other IP on request. Records up to 8 lanes with 12.5 Gbit/s per lane (more with opt. Prepro.) Voltage range: 0.15 to 1.25 differential voltage. Requires accessory kit LA-3521 or LA-3522. Requires PowerDebug X50, PowerDebug PRO, or PowerDebug II. Requires PC with USB 3 or Gigabit Ethernet, 4 GB RAM min, and 64-bit OS.
Preprocessor for PowerTrace Serial (1 or 2) to record trace from up to four lanes of PCIe Gen 4. (Without this preprocessor PowerTrace Serial supports only PCI Gen 2 and Gen 3.) Requires the licenses LA-3550X (License for PCI Express) programmed to your PowerTrace Serial in addition to a suitable trace decoder license. You can choose between two kinds of target connection: Connection 1: OCuLink SFF-8612 connector (via included OCuLink cable). Preprocessor is used inside the included housing. Connection 2: PCI-Express x4 Connector. Preprocessor is used as a slotcard wihout the housing. Voltage levels of sideband signals must have 3.3V. Support for other voltage levels on request.
Trace recorder for serial high-speed ports with 8 Gigabyte trace memory for Arm-ETM via HSSTP. Records up to 8 lanes with 12.5 Gbit/s per lane (more with opt. Prepro.) Voltage range: 0.15 to 1.25 differential voltage. Requires accessory kit LA-3521 or LA-3522. Requires PowerDebug X50, PowerDebug PRO, or PowerDebug II. Requires PC with USB 3 or Gigabit Ethernet, 4 GB RAM min, and 64-bit OS.