Search results for "a20"
Lauterbach is represented in all countries at the forefront of embedded design market and international sales.
Converter from a MIPI20T to an IDC20A debug connector, designed to connect the debug signals of a MIPI20T-HS Whisker (from a CombiProbe or MicroTrace) to a target with IDC20A connector. Can be used for debugging if an IDC20A connector is mounted on the target, which is used on many targets with Arm SoCs or Arm-compatible SoCs. There is a pin header to optionally receive trace signals from elsewhere.
Converter to connect an IDC20A debug cable to a target with MIPI34, MIPI20D, or MIPI10 connector. For connecting an IDC20A debug cable on a PowerTrace Serial use the converter LA-2770 instead. (LA-2770 is for a MIPI34 connector with pin 1 on the right sight, while LA-3770 expects pin 1 on the left side at the target.)
Converter to connect a Debug Cable to a TI-14 or TI-20-Compact connector which is used on many targets with processors from Texas Instruments Former name: Converter ARM-20 to TI-14 or TI-20-Compact
Converter to connect an AutoFocus II Preprocessor with MICTOR-38 and an IDC20A Debug Cable to MIPI-10/-20T/-34. Enables the AutoFocus II Preprocessor to receive trace data from the 4-bit wide trace port of a MIPI-20T target connector. The converter is configured for MIPI-20T via 0 Ohm resistors. By soldering the resistors differently MIPI-34 can be supported as well. You can get the same converter pre-configured for MIPI-34 by ordering LA-3842 Converter Mictor-38/IDC20A to MIPI-34.
Converter IDC20A or MIPI-20 to 10-pin ECU14
Converter 26-pin AUTO26 Debug Cable to IDC20A / IDC20A-ETK / TI-14 Former name: Converter AUTO26 to ARM20, ARM20-ETK or TI14
Replacement part 50 mm used for LA-4503 and LA-4513.
converter only for LA-7817 (JTAG Debugger for SH2/SH3/SH4 20 Pin) to support the ASEBRK signal