Product Catalogue
Find TRACE32 product
Converter from a MIPI20T to an IDC20A debug connector, designed to connect the debug signals of a MIPI20T-HS Whisker (from a CombiProbe or MicroTrace) to a target with IDC20A connector. Can be used for debugging if an IDC20A connector is mounted on the target, which is used on many targets with Arm SoCs or Arm-compatible SoCs. There is a pin header to optionally receive trace signals from elsewhere.
Converter to connect an IDC20A debug cable to a target with MIPI34, MIPI20D, or MIPI10 connector. For connecting an IDC20A debug cable on a PowerTrace Serial use the converter LA-2770 instead. (LA-2770 is for a MIPI34 connector with pin 1 on the right sight, while LA-3770 expects pin 1 on the left side at the target.)
Converter to connect a Debug Cable to a TI-14 or TI-20-Compact connector which is used on many targets with processors from Texas Instruments Former name: Converter ARM-20 to TI-14 or TI-20-Compact
Converter to connect an AutoFocus II Preprocessor with MICTOR-38 and an IDC20A Debug Cable to MIPI-10/-20T/-34. Enables the AutoFocus II Preprocessor to receive trace data from the 4-bit wide trace port of a MIPI-20T target connector. The converter is configured for MIPI-20T via 0 Ohm resistors. By soldering the resistors differently MIPI-34 can be supported as well. You can get the same converter pre-configured for MIPI-34 by ordering LA-3842 Converter Mictor-38/IDC20A to MIPI-34.
Converter 26-pin AUTO26 Debug Cable to IDC20A / IDC20A-ETK / TI-14 Former name: Converter AUTO26 to ARM20, ARM20-ETK or TI14
converter only for LA-7817 (JTAG Debugger for SH2/SH3/SH4 20 Pin) to support the ASEBRK signal
Converter 20-pin AUTO20 Connector to Aurix-HSTCU for debugging and DAP streaming
Converter to connect an IDC20A Debug Cable to a MIPS-14 connector on the target Former name: Converter ARM-20 to MIPS-14
IDC20A debug cable with 20 pin connector to support MicroBlaze cores. Includes software for Windows, Linux and macOS. Requires PowerDebug module. You may want to add one the following converters: LA-3881 Converter IDC20A to XILINX-14 if a 14-pin Xilinx connector is used LA-3860 Converter IDC20A to PPC4xx-16 if a 16-pin PPC4xx connector is used
Converter to connect an IDC20A Debug Cable to a standard 6-pin "Pmod™" connector “Pmod™” is a trademark of Digilent Inc Former name: Conv. ARM-20 to Digilent PMOD
Converter to connect an IDC20A Debug Cable to a TI-14 connector which is used on many targets with processors from Texas Instruments Former name: Converter ARM-20 to TI-14
Converter to connect a MIPS Debug Cable to an ARM-20 connector on the target
Converter to connect the IDC20A Debug Cable to a Mictor connector on the target providing both debug and trace signals. This is needed if you want to connect the Debug Cable without a Preprocessor and if there is only a Mictor on the target. Former name: ARM Converter ARM-20 to Mictor-38
Converter for JTAG 20 pins to Hirose 36 connector for SH2/3/4 processors
Converter to connect an IDC20A Debug Cable to a 14-pin JTAG connector on Xilinx target boards.
Converter 20 pin IDC20A to RL78 14 pin Renesas Former name: Converter ARM-20 to RL78-14
allows to connect LA-3762 to boards designed for LA-3760 Former name: Converter ARM20 to XTENSA14