Product Catalogue

AUTO26 Whisker for CombiProbe suitable for TriCore and dsPIC with 26-pin automotive connector, supporting DAP (DAP2, DAP3, DAP4, DAPWide), JTAG, DXCPL/DXCM. For optimal performance, we recommend using a DAP mode. DAP streaming is supported for TriCore (in DAP mode) and works most effectively with DAPWide (up to 320 Mbit/s). For DXCPL/DXCM, you will likely require the CAN-Box (LA-3889) as well. Voltage Range: 1.8V to 5.0V. Debug Clock Frequency: 10 kHz to 160 MHz Target Connector: AUTO26, AUTO20, AUTO10 Requires a CombiProbe or CombiProbe 2. For dsPIC only JTAG is supported and the converter LA-2773 to the 8-pin Microchip connector is recommended. Please note that TriCore SoCs usually support only 3.3V or 5V in DAP mode. Debug clock frequency in JTAG mode is typically limited to 40 MHz on TriCore SoCs (while up to 160 MHz is supported in DAP mode).

CombiProbe 2 with AUTO26 Whisker for debugging and DAP Streaming, supporting DAP (DAP2, DAP3, DAP4, DAPWide), JTAG, DXCPL/DXCM. For optimal performance, we recommend using a DAP mode. DAP streaming is supported for TriCore (in DAP mode) and works most effectively with DAPWide (up to 320 Mbit/s). For DXCPL/DXCM, you will likely require the CAN-Box (LA-3889) as well. Voltage Range: 1.8V to 5.0V. Debug Clock Frequency: 10 kHz to 160 MHz Target Connector: AUTO26, AUTO20, AUTO10 Trace Memory: 512 MByte. Includes the TRACE32 software for Windows, Linux and macOS on DVD and for download. Requires the following A-license: LA-7756A (Debugger for TriCore Standard Additional). Trace analysis and display requires LA-3799X (Trace License for TriCore ED). Requires Power Debug Interface USB 3.0,PowerDebug II, PowerDebug PRO, PowerDebug E40 or PowerDebug X50. Please note that TriCore SoCs usually support only 3.3V or 5V in DAP mode. Debug clock frequency in JTAG mode is typically limited to 40 MHz on TriCore SoCs (while up to 160 MHz is supported in DAP mode). Extend your CombiProbe with a Mixed-Signal Probe (LA-2500), to record digital and analog signals and correlate them with MCDS DAP streaming. (Requires PowerView R.2024.02 or higher).

Converter from 14 Pin JTAG/OnCE MPC5XXX to AUTO26/20/10 use with LA-7753 JTAG Debugger Qorivva MPC5xxx/SPC5xxx (ICD) to connect to targets designed for LA-2708 (Debugger for MPC5xxx Automotive PRO) LA-3206 Debugger for MPC5xxx AUTO26 (PACK) LA-3736 (JTAG Debugger for MPC5xxx Automotive)

Converter 26-pin Automotive Debug Cable to 16-pin JTAG (TriCore) also supporting DAP (2-wire) for LA-2707 Debugger for TriCore Automotive PRO LA-3203 Debugger for TriCore AUTO26 (PACK) LA-3737 JTAG Debugger for TriCore Automotive

Converter from Automotive Debug Cable (26-pin) to 14 Pin JTAG/OnCE header on target for LA-2708 Debugger for MPC5xxx Automotive PRO LA-3206 Debugger for MPC5xxx AUTO26 (PACK) LA-3736 JTAG Debugger for MPC5xxx Automotive

Converter from 14 pin debug connector for RH850 to AUTO26 use with LA-3719 (Debugger for RH850) to connect to targets designed for LA-2709 Debugger for RH850/V850 Automotive PRO LA-3205 Debugger for RH850/V850 AUTO26 (PACK) LA-3739 Debugger for RH850 Automotive

Converter from Automotive Debug Cable (26-pin) to MICROCHIP-8 for LA-2760 (Debugger for Microchip PIC)

JTAG Converter 26-pin Automotive Debug Cable (PPC/ TriCore/RH850) to 10-pin ECU14 for LA-3203 (Debugger for TriCore AUTO26 (PACK)) LA-3205 (Debugger for RH850/V850 AUTO26 (PACK)) LA-3206 (Debugger for MPC5xxx AUTO26 (PACK)) LA-2707 (Debugger for TriCore Automotive PRO) LA-2708 (Debugger for MPC5xxx Automotive PRO) LA-2709 (Debugger for RH850/V850 Automotive PRO) LA-2713 (Debug-Bundle MPC5xxx/TriCore Automotive PRO) LA-2714 (Debug-Bundle TriCore/RH850 Automotive PRO) LA-3736 (JTAG Debugger for MPC5xxx Automotive) LA-3737 (JTAG Debugger for TriCore Automotive) LA-3738 (Debugger-Bundle MPC5xxx/TriCore Automotive) LA-3739 (Debugger for RH850/V850 Automotive) LA-3753 (Debugger-Bundle TriCore/RH850 Automotive)

Converter from Automotive Debug Cable (26-pin) to 14 Pin RH850 connector on target for LA-2709 Debugger for RH850/V850 Automotive PRO LA-3205 Debugger for RH850/V850 AUTO26 (PACK) LA-3739 Debugger for RH850 Automotive

Converter 16-pin JTAG (TriCore) to 26-pin Automotive Debug Cable also supporting DAP (2-wire) for LA-7756 (OCDS Debugger for TriCore)

Supports TriCore, PCP and GTM debugging included. Supports JTAG, DAP, DXCPL, DXCM. Supports DAP streaming under certain conditions (see below). Includes the TRACE32 software for Windows, Linux and macOS on DVD and for download. Requires PowerDebug Interface USB 2.0/USB 3.0, PowerDebug Ethernet, PowerTrace Ethernet, PowerDebug II, PowerDebug PRO, PowerDebug E40 or PowerDebug X50. Requires LA-3849 if 16 pin JTAG (TriCore) connector is used. DAP Streaming is supported if you use the device with a PowerDebug PRO,E40, or X50 and your PowerView software is version R.2023.09 or newer (build 160619 or higher). If these requirements are met, DAP Streaming is possible only in DAP mode (DAP2, DAP3, DAPWide, DAP4). For performance reasons, we recommend DAPWide at 320 MHz. Trace display and analysis (based on DAP streaming, onchip-buffers, or a PowerTrace) requires LA-3799X (Trace License for TriCore ED). For DXCPL/DXCM you will probably also need the CAN-Box (LA-3889).

Supports dsPIC33C (0.9 V - 5.5 V) Debugging of dual-core dsPIC requires LA-2762 Package for CombiProbe 2 dsPIC Dual Core Includes software for Windows, Linux and macOS. Requires Power Debug Interface USB 2.0/USB 3.0, Power Debug Ethernet, Power Debug II, PowerDebug PRO, PowerDebug E40 or PowerDebug X50

Converter from Automotive Debug Cable (26-pin) to Mictor 38pin (NEXUS MPC5XXX pinout) for LA-2708 (Debugger for MPC5xxx Automotive PRO) LA-3206 Debugger for MPC5xxx AUTO26 (PACK) LA-3736 (JTAG Debugger for MPC5xxx Automotive)

Converter from Automotive Debug Cable (26-pin) to Samtec 50pin (NEXUS MPC5XXX pinout) for LA-2708 (Debugger for MPC5xxx Automotive PRO) LA-3206 Debugger for MPC5xxx AUTO26 (PACK) LA-3736 (JTAG Debugger for MPC5xxx Automotive)

Converter 26-pin AUTO26 Debug Cable to IDC20A / IDC20A-ETK / TI-14 Former name: Converter AUTO26 to ARM20, ARM20-ETK or TI14

Supports Qorivva MPC5xxx/SPC5xxx (e200 cores) and Freescale PX SERIES processors. eTPU, GTM and SPT debugging included. Concurrent debugging of multiple e200 cores on multicore processors requires a License for Multicore Debugging (LA-7960X) (not necessary for lockstep mode). Includes software for Windows, Linux and macOS. Requires PowerDebug E40/X50, PowerDebug II or PRO, PowerDebug Interface USB 2.0/USB 3.0, PowerDebug Ethernet, PowerTrace Ethernet. Includes LA-3873 (Conv. AUTO26 to JTAG14 OnCE) Voltage range 0.9V to 5.5V

Supports RH850 via JTAG, LPD4 ICU-M core support included supports V850 via NWIRE Includes software for Windows, Linux and macOS. Requires PowerDebug E40/X50, PowerDebug II or PRO, PowerDebug Interface USB 2.0/USB 3.0, PowerDebug Ethernet, PowerTrace Ethernet. Debug cable with 26 pin connector. Includes LA-2700 (Conv. AUTO26 to JTAG14 RH850) Voltage range 0.9V to 5.5V

Galvanic isolation for AUTO26 Debug Cable V2 and V3 Components rated to IEC60950-1 (600 V working voltage) Suitable for: LA-3010 AUTO26 Debug Cable V2 LA-3011 AUTO26 Debug Cable V3 LA-3203 Debugger for TriCore AUTO26 (PACK) LA-3205 Debugger for RH850/V850 AUTO26 (PACK) LA-3206 Debugger for MPC5xxx AUTO26 (PACK) LA-2707 Debugger for TriCore Automotive PRO LA-2708 Debugger for MPC5xxx Automotive PRO LA-2709 Debugger for RH850/V850 Automotive PRO LA-2712 Debug-Bundle MPC5xxx/RH850 Automotive PRO LA-2713 Debug-Bundle MPC5xxx/TriCore Automotive PRO LA-2714 Debug-Bundle TriCore/RH850 Automotive PRO Requires: Power Debug Interface USB 2.0/USB 3.0, Power Debug Ethernet, PowerTrace, Power Debug II, PowerDebug PRO, PowerDebug E40 or PowerDebug X50 and TRACE32 software DVD 2021/09 SP2 or newer

This TRACE32 product is a license carrier. It requires a suitable programmed TRACE32 A-license. Requires any PowerDebug with USB 2/USB 3/Ethernet and newer. (Not supported with LA-7702 and LA-7704) Requires TRACE32 R.2022.09-SP2 or newer. DAP streaming supported with TRACE32 build 160619 or higher (R.2023.09) in conjuction with PowerDebug X50, E40, or PRO. Voltage range 1.8V to 5.0V.

Replacement part 50 mm Automotive Debug Cable 26 to 26 pin for LA-2707 (Debugger for TriCore Automotive PRO) LA-2708 (Debugger for MPC5xxx Automotive PRO) LA-2709 (Debugger for RH850/V850 Automotive PRO) LA-3203 (Debugger for TriCore AUTO26 (PACK)) LA-3205 (Debugger for RH850/V850 AUTO26 (PACK)) LA-3206 (Debugger for MPC5xxx AUTO26 (PACK)) LA-3736 (JTAG Debugger for MPC5xxx Automotive) LA-3737 (JTAG Debugger for TriCore Automotive)