Search results for "xtensa"
supports AndeStar (0.4 V - 5 V) Extension applicable to the following debug cables (purchased separately): for LA-7746 (JTAG Debugger for ARM7) for LA-7742 (JTAG Debugger for ARM9) for LA-7744 (JTAG Debugger for ARM10) for LA-7765 (JTAG Debugger for ARM11) for LA-7843 (JTAG Debugger for Cortex-A/-R (ARMv7)) for LA-7844 (JTAG Debugger for Cortex-M) please add the serial number of the existing debug cable to your order
Converter from JTAG14 of LA-7753 (JTAG Debugger Qorivva MPC5xxx/SPC5xxx) and from AUTO26 of LA-2708 (Debugger for MPC5xxx Automotive PRO) LA-3206 (Debugger for MPC5xxx AUTO26 (PACK)) LA-3736 (JTAG Debugger for MPC5xxx Automotive) and Samtec 40 pin of LA-3911 (Preprocessor Aurora NEXUS Automotive) to Samtec ERF 34-pin Power.ORG pinout Includes Samtec 34-pin flex extension
Aurora NEXUS Preprocessor for Qorivva MPC57xx/SPC5 (high-speed serial trace port) - supports reference clock output up to 3125MHz POWER TRACE II: full support Supported speeds per lane: 4 lanes @ 4.25Gbps 3 lanes @ 6.0Gbps 2 lanes @ 6.25Gbps 1 lane @ 6.25Gbps POWER TRACE ETHERNET or POWER TRACE PX limited support Supported speeds per lane: 4 lanes @ 1.25 GBPS 2 lanes @ 2.5 GBPS - POWER TRACE ETHERNET module must have serial number E04xxxxxxxx or higher Required converter: - Samtec34 on target requires LA-3871: Converter Samtec40 HSTP+AUTO26+JTAG14 to Samtec34 including Samtec 34-pin flex extension cable - Samtec22 on target requires LA-3872: Converter Samtec40 HSTP+AUTO26+JTAG14 to Samtec22 including Samtec 22-pin flex extension cable voltage range 0.15V to 1.25V
Aurora NEXUS Preprocessor for Qorivva MPC57xx/SPC5 (high-speed serial trace port) - supports reference clock output up to 3125MHz POWER TRACE II / III: full support Supported speeds per lane: 4 lanes @ 4.25Gbps 3 lanes @ 6.0Gbps 2 lanes @ 6.25Gbps 1 lane @ 6.25Gbps POWER TRACE ETHERNET or POWER TRACE PX limited support Supported speeds per lane: 4 lanes @ 1.25 GBPS 2 lanes @ 2.5 GBPS - POWER TRACE ETHERNET module must have serial number E04xxxxxxxx or higher Required converter: - Samtec34 on target requires LA-3871: Converter Samtec40 HSTP+AUTO26+JTAG14 to Samtec34 including Samtec 34-pin flex extension cable - Samtec22 on target requires LA-3872: Converter Samtec40 HSTP+AUTO26+JTAG14 to Samtec22 including Samtec 22-pin flex extension cable voltage range 0.15V to 1.25V
Converter from JTAG14 of LA-7753 (JTAG Debugger Qorivva MPC5xxx/SPC5xxx) and from AUTO26 of LA-2708 (Debugger for MPC5xxx Automotive PRO) LA-3736 (JTAG Debugger for MPC5xxx Automotive) and Samtec 40 pin of LA-3911 (Preprocessor Aurora NEXUS Automotive) to Samtec ERF 22-pin Power.ORG pinout Includes Samtec 22-pin flex extension for LA-3911 Preproc. Aurora NEXUS and if no separate JTAG/AUTO connector is available on the target, for LA-7753 (JTAG Debugger Qorivva MPC5xxx/SPC5xxx)
Converter from JTAG 16 (TriCore pinout of LA-7756) and Samtec 40 pin -> ERF8 22 pin (Samtec 22 pin) Includes Samtec 22-pin flex extension Converter from AUTO26 (TriCore pinout of LA-3737) and Samtec 40 pin -> ERF8 22 pin (Samtec 22 pin) for LA-3912 Preproc. TriCore AGBT HF-Flex and if no separate JTAG/AUTO connector is available on the target for LA-2707 (Debugger for TriCore Automotive PRO) LA-3203 (Debugger for TriCore AUTO26 (PACK)) LA-3737 (JTAG Debugger for TriCore Automotive) LA-7756 (OCDS Debugger for TriCore)
State-Timing Analyzer to record digital or analog signal via suitable probes. Records up to 102 (51) channels, 200 (400) MHz state, 250 (500) MHz timing, transient recording, 64 MFrames, 48-bit time-stamp, trigger, filter, trigger Delay, etc. This is an extension that attaches to an existing PowerDebug X50, PowerDebug PRO, or PowerDebug II. Available probes: LA-7945 Standard Probe (17 digital single-ended signals) LA-7944 Mictor Probe (34 digital single-ended signals) LA-7946 Samtec Probe (34 digital single-ended signals) LA-7947 Mictor Differential Probe (17 digital differential signals) LA-7954 Mictor Probe with differential clock (32 se + 1 diff signal) LA-7958 Samtec Probe with differential clock (32 se + 1 diff signal) LA-7961 USB2 Probe LA-7943 DigRF Probe Set LA-7949 Analog Probe
State-Timing Analyzer to record digital or analog signal via suitable probes. Records up to 102 (51) channels, 200 (400) MHz state, 250 (500) MHz timing, transient recording, 128 MFrames, 48-bit time-stamp, trigger, filter, trigger Delay, etc. This is an extension that attaches to an existing PowerDebug X50, PowerDebug PRO, or PowerDebug II. Available probes: LA-7945 Standard Probe (17 digital single-ended signals) LA-7944 Mictor Probe (34 digital single-ended signals) LA-7946 Samtec Probe (34 digital single-ended signals) LA-7947 Mictor Differential Probe (17 digital differential signals) LA-7954 Mictor Probe with differential clock (32 se + 1 diff signal) LA-7958 Samtec Probe with differential clock (32 se + 1 diff signal) LA-7961 USB2 Probe LA-7943 DigRF Probe Set LA-7949 Analog Probe
State-Timing Analyzer to record digital or analog signal via suitable probes. Records up to 102 (51) channels, 200 (400) MHz state, 250 (500) MHz timing, transient recording, 256 MFrames, 48-bit time-stamp, trigger, filter, trigger Delay, etc. This is an extension that attaches to an existing PowerDebug X50, PowerDebug PRO, or PowerDebug II. Available probes: LA-7945 Standard Probe (17 digital single-ended signals) LA-7944 Mictor Probe (34 digital single-ended signals) LA-7946 Samtec Probe (34 digital single-ended signals) LA-7947 Mictor Differential Probe (17 digital differential signals) LA-7954 Mictor Probe with differential clock (32 se + 1 diff signal) LA-7958 Samtec Probe with differential clock (32 se + 1 diff signal) LA-7961 USB2 Probe LA-7943 DigRF Probe Set LA-7949 Analog Probe
State-Timing Analyzer to record digital or analog signal via suitable probes. Records up to 204 (102) Channels, 200 (400) MHz State, 250 (500) MHz Timing, Transient Recording, 8 MB sample memory, 512 KFrames, 48 Bit Time-Stamp, Trigger Filter, Trigger Delay, etc. This is an extension that attaches to an existing PowerDebug module. Available probes: LA-7945 Standard Probe (17 digital single-ended signals) LA-7944 Mictor Probe (34 digital single-ended signals) LA-7946 Samtec Probe (34 digital single-ended signals) LA-7947 Mictor Differential Probe (17 digital differential signals) LA-7954 Mictor Probe with differential clock (32 se + 1 diff signals) LA-7958 Samtec Probe with differential clock (32 se + 1 diff signals) LA-7961 USB2 Probe LA-7943 DigRF Probe Set LA-7949 Analog Probe