Product Catalogue

Converter to connect the ARM Debug Cable or the CombiProbe to a Mictor connector on the target. This is needed if you want to debug without a Preprocessor and if there is only a Mictor connector on the target. The trace signals of the CombiProbe are connected to the lowest four trace signals of the Mictor (ETMv3 pinout, continuous mode). But tracing is normally no use case due to the bandwidth limitations of the CombiProbe. Former name: ARM Conv. ARM-20/MIPI-34 to Mictor-38

Supports 5-pin standard JTAG, cJTAG and Serial Wire Debug Port for Arm Cortex-M cores Bandwidth of 200 MBit/s per trace channel includes 256-MByte of trace RAM to support: - ITM via Serial Wire Output/TPIU - ETM Cortex-M continuous mode via TPIU (4-bit) Trace Streaming up to 100 MByte/s requires USB 3.0 (SuperSpeed) capable host computer Concurrent debugging of two or more Cortex-M cores requires a License for Multicore Debugging (LA-7960X)

Supports 5-pin standard JTAG, cJTAG and Serial Wire Debug Port for Arm Cortex-M cores Bandwidth of 400 MBit/s per trace channel includes 256-MByte of trace RAM to support: - ITM via Serial Wire Output/TPIU - ETM Cortex-M continuous mode via TPIU (4-bit) Trace Streaming up to 100 MByte/s requires USB 3.0 (SuperSpeed) capable host computer Concurrent debugging of two or more Cortex-M cores requires a License for Multicore Debugging uTrace (LA-4534X)

Preprocessor for ARM/Cortex Embedded Trace Macrocell (ETM), Program Trace Macrocell (PTM), connector cable and software, 200 MHz clock speed (200 Mbps), 4 x Trace-Depth, 0.9 to 3.6V support normal mode, 4 bit DeMux mode, normal halfrate mode, Mux mode and 4 bit DeMux halfrate mode support max. 16 bit trace port size Important: 3ns setup time, 1ns hold time needed ETMV3.x Continuous Mode only without idle-filter

All-In-One Debug and Trace Solution for Arm Cortex-M. Supports 5-pin standard JTAG, cJTAG and Serial Wire Debug Port for Arm Cortex-M cores and SecurCore SC000/SC300 Includes 256-MByte of trace RAM to support: - ITM via Serial Wire Output/TPIU - ETM Cortex-M continuous mode via TPIU (4-bit) Bandwidth of 400 MBit/s per trace channel. Trace Streaming up to 100 MByte/s requires USB 3.0 (SuperSpeed) capable host computer Concurrent debugging of two or more Cortex-M cores requires a License for Multicore Debugging MicroTrace (LA-7960N) Can not be upgraded to include support for other core architectures. Extend your MicroTrace with a Mixed-Signal Probe (LA-2500), to record and correlated digital and analog signals.

Debug cable and 128-MByte of trace memory Supports Standard-JTAG, cJTAG and Serial Wire Debug Port Bandwidth of 400 MBit/s per trace channel requires at least one of the following A-licenses: LA-7742A (JTAG Debugger License for ARM9 Add.) LA-7746A (JTAG Debugger License for ARM7 Add.) LA-7765A (JTAG Debugger License for ARM11 Add.) LA-7843A (JTAG Debugger License for CORTEX-A Add.) LA-7844A (JTAG Debugger License for CORTEX-M Add.) Trace support (up to 4-bit) included: - MIPI System Trace - ITM via Serial Wire Output/TPIU - ETM Cortex-M continuous mode via TPIU Supports the following trace licenses: LA-7970X (Trace License for the ARM Architecture) requires Power Debug Interface USB 3.0, Power Debug II or Power Debug PRO 5V tolerant inputs; max. output level 3.3V

Debug cable and 128-MByte of trace memory Supports Standard-JTAG, cJTAG and Serial Wire Debug Port Bandwidth of 200 MBit/s per trace channel requires at least one of the following A-licenses: LA-7742A (JTAG Debugger License for ARM9 Add.) LA-7746A (JTAG Debugger License for ARM7 Add.) LA-7765A (JTAG Debugger License for ARM11 Add.) LA-7843A (JTAG Debugger License for CORTEX-A Add.) LA-7844A (JTAG Debugger License for CORTEX-M Add.) Trace support (up to 4-bit) included: - MIPI System Trace - ITM via Serial Wire Output/TPIU - ETM Cortex-M continuous mode via TPIU Supports the following trace licenses: LA-7970X (Trace License for the ARM Architecture) requires Power Debug Interface USB 2.0/USB 3.0, Power Debug Ethernet, PowerTrace, Power Debug II or Power Debug PRO 5V tolerant inputs; max. output level 3.3V

Debug cable and 512 MByte of trace memory Supports Standard-JTAG, cJTAG and Serial Wire Debug Port Bandwidth of 400 MBit/s per trace channel requires at least one of the following A-licenses: LA-3743A Debug. for Cortex-A/R (Armv8 and Armv9) Add. LA-7742A (JTAG Debugger License for ARM9 Add.) LA-7746A (JTAG Debugger License for ARM7 Add.) LA-7765A (JTAG Debugger License for ARM11 Add.) LA-7843A (JTAG Debugger License for CORTEX-A Add.) LA-7844A (JTAG Debugger License for CORTEX-M Add.) Trace support (up to 4-bit) included: - MIPI System Trace - ITM via Serial Wire Output/TPIU - ETM Cortex-M continuous mode via TPIU Supports the following trace licenses: LA-7970X (Trace License for the ARM Architecture) requires Power Debug Interface USB 3.0, Power Debug II or Power Debug PRO 5V tolerant inputs; max. output level 3.3V