Product Catalogue
Find TRACE32 product
Supports 5-pin standard JTAG, cJTAG and Serial Wire Debug Port for Arm Cortex-M cores Bandwidth of 200 MBit/s per trace channel includes 256-MByte of trace RAM to support: - ITM via Serial Wire Output/TPIU - ETM Cortex-M continuous mode via TPIU (4-bit) Trace Streaming up to 100 MByte/s requires USB 3.0 (SuperSpeed) capable host computer Concurrent debugging of two or more Cortex-M cores requires a License for Multicore Debugging (LA-7960X)
All-In-One Debug and Trace Solution for Arm Cortex-M. Supports 5-pin standard JTAG, cJTAG and Serial Wire Debug Port for Arm Cortex-M cores and SecurCore SC000/SC300 Includes 256-MByte of trace RAM to support: - ITM via Serial Wire Output/TPIU - ETM Cortex-M continuous mode via TPIU (4-bit) Bandwidth of 400 MBit/s per trace channel. Trace Streaming up to 100 MByte/s requires USB 3.0 (SuperSpeed) capable host computer Concurrent debugging of two or more Cortex-M cores requires a License for Multicore Debugging MicroTrace (LA-7960N) Can not be upgraded to include support for other core architectures. Extend your MicroTrace with a Mixed-Signal Probe (LA-2500), to record and correlated digital and analog signals.
Supports 5-pin standard JTAG, cJTAG and Serial Wire Debug Port for Arm Cortex-M cores Bandwidth of 400 MBit/s per trace channel includes 256-MByte of trace RAM to support: - ITM via Serial Wire Output/TPIU - ETM Cortex-M continuous mode via TPIU (4-bit) Trace Streaming up to 100 MByte/s requires USB 3.0 (SuperSpeed) capable host computer Concurrent debugging of two or more Cortex-M cores requires a License for Multicore Debugging uTrace (LA-4534X)
Supports Arm Cortex-M cores trace support ETM Cortex-M via ETB included IDC20A debug cable supports 5-pin standard JTAG, cJTAG and Serial Wire Debug Port, (0.4 V - 5 V) includes software for Windows, Linux and MacOSX requires Power Debug Module cJTAG and SWD require Power Debug Interface USB 2.0/USB 3.0, Power Debug Ethernet, PowerTrace, Power Debug II or PowerDebug PRO
Supports Arm Cortex-M cores and SecurCore SC000/SC300 trace support ETM Cortex-M via ETB included GTM and IPU debugging included IDC20A debug cable supports 5-pin standard JTAG, cJTAG and Serial Wire Debug Port, (0.4V - 5V) Includes software for Windows, Linux and macOS cJTAG and SWD require PowerDebug Interface USB 2.0/USB 3.0, PowerDebug Ethernet, PowerTrace, PowerDebug II PowerDebug PRO, PowerDebug E40 or PowerDebug X50
Debug cable and 128-MByte of trace memory Supports Standard-JTAG, cJTAG and Serial Wire Debug Port Bandwidth of 400 MBit/s per trace channel requires at least one of the following A-licenses: LA-7742A (JTAG Debugger License for ARM9 Add.) LA-7746A (JTAG Debugger License for ARM7 Add.) LA-7765A (JTAG Debugger License for ARM11 Add.) LA-7843A (JTAG Debugger License for CORTEX-A Add.) LA-7844A (JTAG Debugger License for CORTEX-M Add.) Trace support (up to 4-bit) included: - MIPI System Trace - ITM via Serial Wire Output/TPIU - ETM Cortex-M continuous mode via TPIU Supports the following trace licenses: LA-7970X (Trace License for the ARM Architecture) requires Power Debug Interface USB 3.0, Power Debug II or Power Debug PRO 5V tolerant inputs; max. output level 3.3V
Debug cable and 512 MByte of trace memory Supports Standard-JTAG, cJTAG and Serial Wire Debug Port Bandwidth of 400 MBit/s per trace channel requires at least one of the following A-licenses: LA-3743A Debug. for Cortex-A/R (Armv8 and Armv9) Add. LA-7742A (JTAG Debugger License for ARM9 Add.) LA-7746A (JTAG Debugger License for ARM7 Add.) LA-7765A (JTAG Debugger License for ARM11 Add.) LA-7843A (JTAG Debugger License for CORTEX-A Add.) LA-7844A (JTAG Debugger License for CORTEX-M Add.) Trace support (up to 4-bit) included: - MIPI System Trace - ITM via Serial Wire Output/TPIU - ETM Cortex-M continuous mode via TPIU Supports the following trace licenses: LA-7970X (Trace License for the ARM Architecture) requires Power Debug Interface USB 3.0, Power Debug II or Power Debug PRO 5V tolerant inputs; max. output level 3.3V
Debug cable and 128-MByte of trace memory Supports Standard-JTAG, cJTAG and Serial Wire Debug Port Bandwidth of 200 MBit/s per trace channel requires at least one of the following A-licenses: LA-7742A (JTAG Debugger License for ARM9 Add.) LA-7746A (JTAG Debugger License for ARM7 Add.) LA-7765A (JTAG Debugger License for ARM11 Add.) LA-7843A (JTAG Debugger License for CORTEX-A Add.) LA-7844A (JTAG Debugger License for CORTEX-M Add.) Trace support (up to 4-bit) included: - MIPI System Trace - ITM via Serial Wire Output/TPIU - ETM Cortex-M continuous mode via TPIU Supports the following trace licenses: LA-7970X (Trace License for the ARM Architecture) requires Power Debug Interface USB 2.0/USB 3.0, Power Debug Ethernet, PowerTrace, Power Debug II or Power Debug PRO 5V tolerant inputs; max. output level 3.3V
CombiProbe 2 with MIPI34 whisker for debugging and tracing. Voltage Range: 1.2V...3.3V (5V tolerant inputs). Target Connector: MIPI34, MIPI20T, MIPI10 Trace memory: 512 MByte. Maximum trace port width: 4 pins. Maximum trace bandwidth: 200 MBit/s per trace pin. Includes the TRACE32 software for Windows, Linux and macOS on DVD and for download. Requires at least one of the following A-licenses: LA-3743A Debug. for Cortex-A/R (Armv8 and Armv9) Add. LA-7844A Debug Cortex-M (Armv6/7/8 32-bit) Add. LA-7843A Debug Cortex-A/-R (Armv7 32-bit) Add. LA-7765A JTAG Debugger License for Arm11 Add. LA-7742A JTAG Debugger License for Arm9 Add. LA-7746A JTAG Debugger License for Arm7 Add. Requires trace license LA-7970X for on-chip ETM traces of Cortex-A/R. Requires Power Debug Interface USB 3.0, PowerDebug II, PowerDebug PRO, PowerDebug E40 or PowerDebug X50. Extend your CombiProbe with a Mixed-Signal Probe (LA-2500), to record and correlate digital and analog signals.
Supports RH850 via JTAG, LPD4, LPD1 ICU-M core support included supports V850 via NWIRE Includes software for Windows, Linux and macOS. requires Power Debug Interface USB 2.0/USB 3.0, Power Debug Ethernet, Power Debug II PowerDebug PRO or PowerDebug E40 Debug cable with 14 pin connector
supports RH850 via JTAG, LPD4 ICU-M core support included supports V850 via NWIRE includes software for Windows, Linux and MacOSX requires Power Debug Interface USB 2.0/USB 3.0, Power Debug Ethernet, Power Trace Ethernet, Power Debug II or PowerDebug PRO AUTO26 debug cable voltage range 0.9V to 5.5V
supports RH850 via JTAG, LPD4 ICU-M core support included supports V850 via NWIRE includes software for Windows, Linux and MacOSX requires Power Debug Interface USB 2.0/USB 3.0, Power Debug Ethernet, Power Trace Ethernet, Power Debug II, PowerDebug PRO or PowerDebug E40 debug cable with 26 pin connector includes LA-2700 (Conv. AUTO26 to JTAG14 RH850)
CombiProbe 2 with MIPI20-HS whisker for debugging and tracing. Voltage Range: 1.2V...5.0V. Target Connector: MIPI20T, MIPI10 Trace Memory: 512 MByte. Maximum Trace Port Width: 4 pins. Maximum Trace Bandwidth: 400 MBit/s per trace pin. Includes the TRACE32 software for Windows, Linux and macOS on DVD and for download. Requires at least one of the following A-licenses: LA-3743A Debug. for Cortex-A/R (Armv8 and Armv9) Add. LA-7844A Debug Cortex-M (Armv6/7/8 32-bit) Add. LA-7843A Debug Cortex-A/-R (Armv7 32-bit) Add. LA-7765A JTAG Debugger License for Arm11 Add. LA-7742A JTAG Debugger License for Arm9 Add. LA-7746A JTAG Debugger License for Arm7 Add. LA-2540A Debugger for RISC-V 32-bit Add. LA-2541A Debugger for RISC-V 64-bit Add. Requires trace license LA-7970X for on-chip ETM traces of Cortex-A/R. Requires trace license LA-2767X for RISC-V off-chip traces emitted via a 4-bit Pin Interface Block (PIB). Requires Power Debug Interface USB 3.0,PowerDebug II, PowerDebug PRO, PowerDebug E40 or PowerDebug X50. Extend your CombiProbe with a Mixed-Signal Probe (LA-2500), to record and correlate digital and analog signals.
Supports RH850 via JTAG, LPD4 ICU-M core support included supports V850 via NWIRE Includes software for Windows, Linux and macOS. Requires PowerDebug E40/X50, PowerDebug II or PRO, PowerDebug Interface USB 2.0/USB 3.0, PowerDebug Ethernet, PowerTrace Ethernet. Debug cable with 26 pin connector. Includes LA-2700 (Conv. AUTO26 to JTAG14 RH850) Voltage range 0.9V to 5.5V