Search results for "s51"
µTrace® is a cost-effective, but powerful, all-in-one debug and trace solution for Arm® Cortex-M microcontrollers and for debugging 32-bit RISC V cores.
Adapter from Mictor76 to Glenair51 for: LA-7630 (NEXUS Debugger/Trace for MPC5xxx AutoFocus)
Converter from the 38 pin mictor connector on Nexus Adapter for MPC56x family/Mictor38 (LA-7791) to NEXUS 51 pin Glenair connector
Parallel NEXUS Adapter with AutoFocus technology for Qorivva MPC5xxx/SPC5xxx and PX series includes debugger for eTPU and GTM Concurrent debugging of multiple e200 cores on multicore processors requires a License for Multicore Debugging (LA-7960X) (not necessary for lockstep mode) Voltage range: 1..5 V TRACE port: 2..16 MDO (data) lines 1..2 MSEO (control) lines Data Bandwidth: up to 200 MBit/s 76-pin mictor connector requires one of the following converters LA-7631 for Mictor 38 on target LA-7632 for Glenair 51 on target LA-7636 for SAMTEC 50 on target LA-7637 for SAMTEC 20 on target includes software for Windows, Linux and MacOSX requires PowerTrace hardware usage with PowerTrace III requires TRACE32 software DVD 2021/09 or newer please contact Lauterbach if the serial number of your PowerTrace is lower than E03010003982
Adapter for NEXUS on Spanish Oak (MPC565), Silver Oak (MPC561) and Green Oak (MPC563) with 38 pin mictor connector includes software for Windows, Linux and MacOSX only with PowerTrace Ethernet 256MB/512MB or PowerTrace PX AMP40NS NEXUS connector requires LA-7793 AMP50 NEXUS connector requires LA-7794 GLENAIR51 NEXUS connector requires LA-7797
State-Timing Analyzer to record digital or analog signal via suitable probes. Records up to 102 (51) channels, 200 (400) MHz state, 250 (500) MHz timing, transient recording, 64 MFrames, 48-bit time-stamp, trigger, filter, trigger Delay, etc. This is an extension that attaches to an existing PowerDebug X50, PowerDebug PRO, or PowerDebug II. Available probes: LA-7945 Standard Probe (17 digital single-ended signals) LA-7944 Mictor Probe (34 digital single-ended signals) LA-7946 Samtec Probe (34 digital single-ended signals) LA-7947 Mictor Differential Probe (17 digital differential signals) LA-7954 Mictor Probe with differential clock (32 se + 1 diff signal) LA-7958 Samtec Probe with differential clock (32 se + 1 diff signal) LA-7961 USB2 Probe LA-7943 DigRF Probe Set LA-7949 Analog Probe
State-Timing Analyzer to record digital or analog signal via suitable probes. Records up to 102 (51) channels, 200 (400) MHz state, 250 (500) MHz timing, transient recording, 128 MFrames, 48-bit time-stamp, trigger, filter, trigger Delay, etc. This is an extension that attaches to an existing PowerDebug X50, PowerDebug PRO, or PowerDebug II. Available probes: LA-7945 Standard Probe (17 digital single-ended signals) LA-7944 Mictor Probe (34 digital single-ended signals) LA-7946 Samtec Probe (34 digital single-ended signals) LA-7947 Mictor Differential Probe (17 digital differential signals) LA-7954 Mictor Probe with differential clock (32 se + 1 diff signal) LA-7958 Samtec Probe with differential clock (32 se + 1 diff signal) LA-7961 USB2 Probe LA-7943 DigRF Probe Set LA-7949 Analog Probe
State-Timing Analyzer to record digital or analog signal via suitable probes. Records up to 102 (51) channels, 200 (400) MHz state, 250 (500) MHz timing, transient recording, 256 MFrames, 48-bit time-stamp, trigger, filter, trigger Delay, etc. This is an extension that attaches to an existing PowerDebug X50, PowerDebug PRO, or PowerDebug II. Available probes: LA-7945 Standard Probe (17 digital single-ended signals) LA-7944 Mictor Probe (34 digital single-ended signals) LA-7946 Samtec Probe (34 digital single-ended signals) LA-7947 Mictor Differential Probe (17 digital differential signals) LA-7954 Mictor Probe with differential clock (32 se + 1 diff signal) LA-7958 Samtec Probe with differential clock (32 se + 1 diff signal) LA-7961 USB2 Probe LA-7943 DigRF Probe Set LA-7949 Analog Probe