Search results for "core"
Parallel preprocessor for ARM cores Embedded Trace Macrocell (ETM), Program Trace Macrocell (PTM) Connector cable and software, Variable threshold level and termination voltage, AUTOFOCUS self calibration technology, Support all ETM modes Voltage: 1.2 to 3.3V - else contact support Traceport: 1-32bit Bandwidth: 9.6 Gbps (300MHz clock speed, DDR) Connector: 60 pin Samtec connector (MIPI) supports up to 4 trace sources (mix of TPIU and STM) Requires PowerTrace Version 6 or higher or PowerTrace II / III
Parallel preprocessor for Arm cores Embedded Trace Macrocell (ETM), Program Trace Macrocell (PTM) Connector cable and software, Variable threshold level and termination voltage, AUTOFOCUS self calibration technology, Support all ETM modes Voltage: 1.2 to 3.3V - else contact support Traceport: 1-32bit Bandwidth: 9.6 Gbps (300MHz clock speed, DDR) Connector: 60 pin Samtec connector (MIPI) Supports up to 4 trace sources (mix of TPIU and STM) Requires PowerTrace Version 6 or higher or PowerTrace II / III
Trace Preprocessor with data for MPC505, MPC555, MPC56X, MPC821, MPC860 with soldered edge connection connector cable and software max bus frequency 66MHz Requires PowerTrace Version 6 or higher to support more than 40 MHz voltage range 2.5V to 5.0V
supports Qorivva MPC5xxx/SPC5xxx (e200 cores) and Freescale PX SERIES processors eTPU, GTM and SPT debugging included Concurrent debugging of multiple e200 cores on multicore processors requires a License for Multicore Debugging (LA-7960X) (not necessary for lockstep mode) includes software for Windows, Linux and MacOSX requires Power Debug Interface USB 2.0/USB 3.0, Power Debug Ethernet, Power Trace Ethernet, Power Debug II, PowerDebug PRO or PowerDebug E40 includes LA-3873 (Conv. AUTO26 to JTAG14 OnCE)
Supports Qorivva MPC5xxx/SPC5xxx (e200 cores) and Freescale PX SERIES processors. eTPU, GTM and SPT debugging included. Concurrent debugging of multiple e200 cores on multicore processors requires a License for Multicore Debugging (LA-7960X) (not necessary for lockstep mode). Includes software for Windows, Linux and macOS. Requires PowerDebug E40/X50, PowerDebug II or PRO, PowerDebug Interface USB 2.0/USB 3.0, PowerDebug Ethernet, PowerTrace Ethernet. Includes LA-3873 (Conv. AUTO26 to JTAG14 OnCE) Voltage range 0.9V to 5.5V
Floating license for debugging of several cores of the same main architecture-family running on Emulators or Virtual Targets in Asymmetric Multi-Processing (AMP) configuration. You need a suitable debug Front-End license in addition to the license. Allows together with one TRACE32 Front-End license to use up to 8 TRACE32 PowerView GUIs of the same processor architecture on the same host machine. Alternatively 2 identical TRACE32 Front-End licenses can be used. The up to 8 TRACE32 GUIs are assigned to a license pool. All required TRACE32 Back-End, Trace and Integration licenses are added to the same license pool.
supports Qorivva MPC5xxx/SPC5xxx (e200 cores) and Freescale PX SERIES processors eTPU, GTM and SPT debugging included Concurrent debugging of multiple e200 cores on multicore processors requires a License for Multicore Debugging (LA-7960X) (not necessary for lockstep mode) includes software for Windows, Linux and MacOSX AUTO26 debug cable requires Power Debug Interface USB 2.0/USB 3.0, Power Debug Ethernet, Power Trace Ethernet, Power Debug II or PowerDebug PRO includes LA-3873 (Conv. AUTO26 to JTAG14 OnCE) voltage range 0.9V to 5.5V
Adapter for debugging over a CAN bus with up to 8 Mbit/s supporting DAP over CAN Physical Layer (DXCPL), DAP over CAN Message (DXCM) and more. Includes a removable CAN termination resistor (120 Ohm). Requires an AUTO26 Debug Cable V3 (LA-3011), AUTO26 Debug Cable V2 (LA-3010), or a CombiProbe2 with AUTO26 Whisker (LA-3081).
Parallel NEXUS Adapter with AutoFocus technology for Qorivva MPC5xxx/SPC5xxx and PX series includes debugger for eTPU and GTM Concurrent debugging of multiple e200 cores on multicore processors requires a License for Multicore Debugging (LA-7960X) (not necessary for lockstep mode) Voltage range: 1..5 V TRACE port: 2..16 MDO (data) lines 1..2 MSEO (control) lines Data Bandwidth: up to 200 MBit/s 76-pin mictor connector requires one of the following converters LA-7631 for Mictor 38 on target LA-7632 for Glenair 51 on target LA-7636 for SAMTEC 50 on target LA-7637 for SAMTEC 20 on target includes software for Windows, Linux and MacOSX requires PowerTrace hardware usage with PowerTrace III requires TRACE32 software DVD 2021/09 or newer please contact Lauterbach if the serial number of your PowerTrace is lower than E03010003982
Adapter for debugging over a CAN bus with up to 1 Mbit/s supporting DAP over CAN Physical Layer (DXCPL) and more, with internal termination resistor. Usage with PowerDebug E40 / X50 / PRO requires one of the following: LA-3203 Debugger for TriCore AUTO26 (PACK), LA-3081 CombiProbe 2 for AUTO26 (PACK), LA-2707 Debugger for TriCore Automotive PRO (EOL). Usage with PowerDebug USB 3 / USB 2 / Ethernet / II requires one of the following:: LA-3203 Debugger for TriCore AUTO26 (PACK), LA-3081 CombiProbe 2 for AUTO26 (PACK), LA-2707 Debugger for TriCore Automotive PRO (EOL). LA-3737 Debugger for TriCore Automotive (EOL), LA-7756 Debugger for TriCore Standard (16-pin) (EOL).