Product Catalogue

Converter to connect an IDC20A Debug Cable to a 14-pin JTAG connector on Xilinx target boards.

Converter Mictor connector to GPIO header of XILINX ML403/ML501 for Preprocessor for MicroBlaze (LA-3803) Preprocessor for Beyond AUTOFOCUS II (LA-3908)

Converter to connect a PowerPC-4xx Debug Cable (16-pin) to a 14-pin JTAG connector on Xilinx target boards.

Preprocessor for Real-Time Trace of MICROBLAZE Requires Xilinx Vivado 2018.3 or later or Vivado 2018.2 with special patch from Xilinx (see https://www.xilinx.com/support/answers/71422.html#). 250 MHz clock speed Variable threshold level and termination voltage, AUTOFOCUS self calibration technology, Supports 1.2 to 3.3V - else contact support Requires PowerTrace Version 6 or higher or PowerTrace II / III voltage range 1.2V to 3.3V

Supports off-chip trace port for MicroBlaze if applied to an AUTOFOCUS II preprocessor Requires LA-7986 Mictor38-Mictor38-JTAG 16pin Conv. for PPC4XX Requires Xilinx Vivado 2018.3 or later or Vivado 2018.2 with special patch from Xilinx (see https://www.xilinx.com/support/answers/71422.html#). please add the serial number of the preprocessor to your order AUTOFOCUS II Preprocessors with serial number C0806xxxxxx and lower have to be send to Lauterbach Germany for an hardware upgrade

Converter Mictor connector to FX2 header of XILINX Spartan3EStarter for Preprocessor for MicroBlaze (LA-3803)

Converter Mictor connector to trace header of XILINX Spartan3ADSP1800Starter for Preprocessor for MicroBlaze (LA-3803)

Debug license to support MicroBlaze cores. You may want to add one the following converters: LA-3731 Converter PPC4xx-16 to XILINX-14 if a 16-pin PowerPC Debug Cable is used LA-3881 Converter IDC20A to XILINX-14 if an IDC20A Debug Cable is used Please add the serial number of the existing debug cable to your order.

IDC20A debug cable with 20 pin connector to support MicroBlaze cores. Includes software for Windows, Linux and macOS. Requires PowerDebug module. You may want to add one the following converters: LA-3881 Converter IDC20A to XILINX-14 if a 14-pin Xilinx connector is used LA-3860 Converter IDC20A to PPC4xx-16 if a 16-pin PPC4xx connector is used

JTAG Adapter Spartan3 Xilinx MicroBlaze 16 pin to 6 pin Boards: EVB Spartan3EStarter Kit; EVB S3ADSP1800A

Adapter for PowerTrace Serial to support HSDP on Versal SoCs from AMD/Xilinx, for real-time tracing and fast memory transactions. Requires LA-3551X "License for HSDP". Trace decoding requires an additional architecture-specific license, which is usually included with your PowerTrace Serial. The adapter gets plugged to SERIAL PORT 1 (80-pin) of a PowerTrace Serial.

License to enable fast memory transactions and tracing via a high-speed debug port (HSDP) available on some Versal SoCs from AMD/Xilinx. Architecture independent license. Trace decoding requires an additional architecture-specific license, which is usually included with your PowerTrace Serial. Please add the serial number of your PowerTrace Serial to your order. It is recommended to use the HSDP Adapter LA-3585 in addition to this license.

Converter from Samtec40 HSSTP and/or from two Mictor38 to FMC (FPGA Mezzanine Card).connector. This converter brings suitable connectors for off-chip trace recording to evaluation boards by AMD Xilinx which have only an FMC connector, but neither a Samtec40 connector (for serial off-chip trace) nor Mictor38 connectors (for parallel off-chip trace). The converter features 4 additional LEDs and a 156.25 MHz oscillator.

Preprocessor for Beyond BA2x cores Instruction trace only 600 MBaud (300MHz clock speed, DDR) Variable threshold level and termination voltage, AUTOFOCUS self calibration technology, Supports 1.8 to 3.3V - otherwise contact support Requires PowerTrace II, PowerTrace PX or PowerTrace/Ethernet Version 6 or higher May require LA-3804 Converter Mictor 38 to XILINX XGI voltage range 1.2V to 3.3V