Product Catalogue
Find TRACE32 product
Supports VSPA Uses IDC20A debug cable, which supports 5-pin standard JTAG, cJTAG (IEEE 1149.7) and Serial Wire Debug (SWD), (0.4V - 5V) Includes software for Windows, Linux and macOS. Requires PowerDebug base module. Not supported are the very old 1st Gen. PowerDebug modules LA-7702 (without USB) and LA-7704 (with USB 1.1).
Converter to connect two ARM Debug Cable to one connector on the target. Old method to handle multicore debugging by using two debugger hardware modules.
Supports 78K0R and RL78 cores (16-bit). Uses IDC20A debug cable, which supports 5-pin standard JTAG, cJTAG (IEEE 1149.7) and Serial Wire Debug (SWD), (0.4V - 5V) Includes software for Windows, Linux and macOS. Requires PowerDebug base module. Not supported are the very old 1st Gen. PowerDebug modules LA-7702 (without USB) and LA-7704 (with USB 1.1).
Debug cable and 128-MByte of trace memory Supports Standard-JTAG, cJTAG and Serial Wire Debug Port Bandwidth of 400 MBit/s per trace channel requires at least one of the following A-licenses: LA-7742A (JTAG Debugger License for ARM9 Add.) LA-7746A (JTAG Debugger License for ARM7 Add.) LA-7765A (JTAG Debugger License for ARM11 Add.) LA-7843A (JTAG Debugger License for CORTEX-A Add.) LA-7844A (JTAG Debugger License for CORTEX-M Add.) Trace support (up to 4-bit) included: - MIPI System Trace - ITM via Serial Wire Output/TPIU - ETM Cortex-M continuous mode via TPIU Supports the following trace licenses: LA-7970X (Trace License for the ARM Architecture) requires Power Debug Interface USB 3.0, Power Debug II or Power Debug PRO 5V tolerant inputs; max. output level 3.3V
Supports ARC EM/HS/EV/VPX, ARC 600/700, ARCtangent-A4/A5 includes software for Windows, Linux and MacOSX requires Power Debug Module IDC20A debug cable
Supports ARC EM/HS/EV/VPX, ARC 600/700, ARCtangent-A4/A5 Please add the base serial number of your existing debug cable to your order. LA-3750A in LA-3737 Debugger for TriCore Automotive can not be used to debug a stand-alone ARC chip LA-3750A can not be programmed on LA-7756 Debugger for TriCore Standard
Debug cable and 512 MByte of trace memory Supports Standard-JTAG, cJTAG and Serial Wire Debug Port Bandwidth of 400 MBit/s per trace channel requires at least one of the following A-licenses: LA-3743A Debug. for Cortex-A/R (Armv8 and Armv9) Add. LA-7742A (JTAG Debugger License for ARM9 Add.) LA-7746A (JTAG Debugger License for ARM7 Add.) LA-7765A (JTAG Debugger License for ARM11 Add.) LA-7843A (JTAG Debugger License for CORTEX-A Add.) LA-7844A (JTAG Debugger License for CORTEX-M Add.) Trace support (up to 4-bit) included: - MIPI System Trace - ITM via Serial Wire Output/TPIU - ETM Cortex-M continuous mode via TPIU Supports the following trace licenses: LA-7970X (Trace License for the ARM Architecture) requires Power Debug Interface USB 3.0, Power Debug II or Power Debug PRO 5V tolerant inputs; max. output level 3.3V
Support for ARM/Cortex Embedded Trace Macrocell (ETM), Program Trace Macrocell (PTM), if applied to an AUTOFOCUS II preprocessor please add the serial number of the preprocessor to your order AUTOFOCUS II Preprocessors with serial number C0806xxxxxx and lower have to be send to Lauterbach Germany for an hardware upgrade
Converter to connect a MIPS Debug Cable to an ARM-20 connector on the target
supports Arm9 (0.4 V - 5 V) IDC20A debug cable supports 5-pin standard JTAG, cJTAG and Serial Wire Debug Port, (0.4 V - 5 V) includes software for Windows, Linux and MacOSX requires Power Debug Module cJTAG and SWD require Power Debug Interface USB 2.0/USB 3.0, Power Debug Ethernet, PowerTrace, Power Debug II or PowerDebug PRO
Converter to connect an Arm Debug Cable V1 (ARM-14) to IDC20A or to connect a newer IDC20A Debug Cable to ARM-14 target connector ARM-14 is an obsolete connector specification, do not use for new designs Former name: ARM Converter ARM-20 to/from ARM-14
Supported for ARC Real-Time Trace (ARC RTT) if applied to an serial preprocessor please add the serial number of the preprocessor to your order
Supports ARC EM/HS/EV/VPX, ARC 600/700, ARCtangent-A4/A5 Uses IDC20A debug cable, which supports 5-pin standard JTAG, cJTAG (IEEE 1149.7) and Serial Wire Debug (SWD), (0.4V - 5V) Includes software for Windows, Linux and macOS. Requires PowerDebug base module.
supports Arm9 Multicore debugging included requires a valid software guarantee or a valid software maintenance key please add the serial number of the existing debug cable to your order
Supports ARM10. Multicore debugging included. Requires a valid software guarantee or a valid software maintenance key. Please add the serial number of the existing debug cable to your order.
supports Arm7 Multicore debugging included requires a valid software guarantee or a valid software maintenance key please add the serial number of the existing debug cable to your order
Supports Arm11. Multicore debugging included. Requires a valid software guarantee or a valid software maintenance key. Please add the serial number of the existing debug cable to your order.
Trace license to support ARC Nexus Trace (ARC RTT), applicable to an AutoFocus II preprocessor. Requires an AutoFocus II preprocessor with a base serial number of C1210xxxxxxx or higher. Please add the base serial number of your existing AutoFocus II preprocessor to your order.
Preprocessor for ARM/Cortex Embedded Trace Macrocell (ETM), Program Trace Macrocell (PTM), Connector cable and software, 350 MHz clock speed, 4 x Trace-Depth, Variable threshold level and termination voltage, AUTOFOCUS self calibration technology, Support all ETM modes, with 2 MICTOR connectors, Supports 1.8 to 3.3V - else contact support Requires PowerTrace/Ethernet Version 6 or higher or PowerTrace II / III Support max. 32 bit trace port size for ARM11