Search results for "stm"

Supports TMS320C54xx. Uses IDC20A debug cable, which supports 5-pin standard JTAG, cJTAG (IEEE 1149.7) and Serial Wire Debug (SWD), (0.4V - 5V) Includes software for Windows, Linux and macOS. Requires LA-7748 if 14-pin TI target adapter is used.

Supports Qorivva MPC5xxx/SPC5xxx (e200 cores) and Freescale PX SERIES processors. eTPU, GTM and SPT debugging included. Concurrent debugging of multiple e200 cores on multicore processors requires a License for Multicore Debugging (LA-7960X) (not necessary for lockstep mode). Includes software for Windows, Linux and macOS. Requires PowerDebug E40/X50, PowerDebug II or PRO, PowerDebug Interface USB 2.0/USB 3.0, PowerDebug Ethernet, PowerTrace Ethernet. Includes LA-3873 (Conv. AUTO26 to JTAG14 OnCE) Voltage range 0.9V to 5.5V

supports Qorivva MPC5xxx/SPC5xxx (e200 cores) and Freescale PX SERIES processors eTPU, GTM and SPT debugging included Concurrent debugging of multiple e200 cores on multicore processors requires a License for Multicore Debugging (LA-7960X) (not necessary for lockstep mode) includes software for Windows, Linux and MacOSX AUTO26 debug cable requires Power Debug Interface USB 2.0/USB 3.0, Power Debug Ethernet, Power Trace Ethernet, Power Debug II or PowerDebug PRO includes LA-3873 (Conv. AUTO26 to JTAG14 OnCE) voltage range 0.9V to 5.5V

Debug cable and 128-MByte of trace memory for Intel x86/x64 processors with PTI/STP only Since the CombiProbe Intel x86/x64 MIPI34 Whisker cable does not have a serial termination, please contact our technical support if you want to add a license for another processor architecture requires the following A-license: LA-3776A (JTAG Debugger for Intel x86/x64) requires Power Debug Interface USB 2.0/USB 3.0, Power Debug Ethernet, PowerTrace, Power Debug II or Power Debug PRO 5V tolerant inputs; max. output level 3.3V

Supports TMS320C55x. Uses IDC20A debug cable, which supports 5-pin standard JTAG, cJTAG (IEEE 1149.7) and Serial Wire Debug (SWD), (0.4V - 5V) Includes software for Windows, Linux and macOS. Requires PowerDebug base module. Requires LA-7748 if 14 pin TI target adapter is used.

Supports VSPA Uses IDC20A debug cable, which supports 5-pin standard JTAG, cJTAG (IEEE 1149.7) and Serial Wire Debug (SWD), (0.4V - 5V) Includes software for Windows, Linux and macOS. Requires PowerDebug base module. Not supported are the very old 1st Gen. PowerDebug modules LA-7702 (without USB) and LA-7704 (with USB 1.1).

Supports 78K0R and RL78 cores (16-bit). Uses IDC20A debug cable, which supports 5-pin standard JTAG, cJTAG (IEEE 1149.7) and Serial Wire Debug (SWD), (0.4V - 5V) Includes software for Windows, Linux and macOS. Requires PowerDebug base module. Not supported are the very old 1st Gen. PowerDebug modules LA-7702 (without USB) and LA-7704 (with USB 1.1).

Parallel NEXUS Adapter with AutoFocus technology for Qorivva MPC5xxx/SPC5xxx and PX series includes debugger for eTPU and GTM Concurrent debugging of multiple e200 cores on multicore processors requires a License for Multicore Debugging (LA-7960X) (not necessary for lockstep mode) Voltage range: 1..5 V TRACE port: 2..16 MDO (data) lines 1..2 MSEO (control) lines Data Bandwidth: up to 200 MBit/s 76-pin mictor connector requires one of the following converters LA-7631 for Mictor 38 on target LA-7632 for Glenair 51 on target LA-7636 for SAMTEC 50 on target LA-7637 for SAMTEC 20 on target includes software for Windows, Linux and MacOSX requires PowerTrace hardware usage with PowerTrace III requires TRACE32 software DVD 2021/09 or newer please contact Lauterbach if the serial number of your PowerTrace is lower than E03010003982

Supports TriCore, PCP and GTM debugging included. Supports JTAG, DAP, DXCPL, DXCM. Supports DAP streaming under certain conditions (see below). Includes the TRACE32 software for Windows, Linux and macOS on DVD and for download. Requires PowerDebug Interface USB 2.0/USB 3.0, PowerDebug Ethernet, PowerTrace Ethernet, PowerDebug II, PowerDebug PRO, PowerDebug E40 or PowerDebug X50. Requires LA-3849 if 16 pin JTAG (TriCore) connector is used. DAP Streaming is supported if you use the device with a PowerDebug PRO,E40, or X50 and your PowerView software is version R.2023.09 or newer (build 160619 or higher). If these requirements are met, DAP Streaming is possible only in DAP mode (DAP2, DAP3, DAPWide, DAP4). For performance reasons, we recommend DAPWide at 320 MHz. Trace display and analysis (based on DAP streaming, onchip-buffers, or a PowerTrace) requires LA-3799X (Trace License for TriCore ED). For DXCPL/DXCM you will probably also need the CAN-Box (LA-3889).

CombiProbe 2 with MIPI34 whisker for debugging and tracing. Voltage Range: 1.2V...3.3V (5V tolerant inputs). Target Connector: MIPI34, MIPI20T, MIPI10 Trace memory: 512 MByte. Maximum trace port width: 4 pins. Maximum trace bandwidth: 200 MBit/s per trace pin. Includes the TRACE32 software for Windows, Linux and macOS on DVD and for download. Requires at least one of the following A-licenses: LA-3743A Debug. for Cortex-A/R (Armv8 and Armv9) Add. LA-7844A Debug Cortex-M (Armv6/7/8 32-bit) Add. LA-7843A Debug Cortex-A/-R (Armv7 32-bit) Add. LA-7765A JTAG Debugger License for Arm11 Add. LA-7742A JTAG Debugger License for Arm9 Add. LA-7746A JTAG Debugger License for Arm7 Add. Requires trace license LA-7970X for on-chip ETM traces of Cortex-A/R. Requires Power Debug Interface USB 3.0, PowerDebug II, PowerDebug PRO, PowerDebug E40 or PowerDebug X50. Extend your CombiProbe with a Mixed-Signal Probe (LA-2500), to record and correlate digital and analog signals.