Search results for "la-2727"
Converter from Intel MIPI60-Cv2 to MIPI34 pin-out on target Converts termination scheme Intel (50 Ohm parallel termination at receiver) to termination scheme ARM (50 Ohm series termination at sender) Support for JTAG/SWD Maps Intel specific debug signals to MIPI34 pins. Default mapping: Intel PREQ -> DBGREQ (pin 18 on MIPI34) Intel PRDY -> DBGACK (pin 20 on MIPI34) Intel HOOK6 (PMODE) -> RTCK (pin 12 on MIPI34) Intel HOOK0 (PowerGood) -> BCE (pin 14 on MIPI34) Intel HOOK7 (ResetOut) -> RESET (pin 10 on MIPI34) TVREF (trace reference voltage) == DVREF (debug reference voltage) For other possible options, please contact Lauterbach.
Converter to connect an IDC20A Debug Cable to a MIPS-14 connector on the target Former name: Converter ARM-20 to MIPS-14
Converter to connect a MIPS Debug Cable to an ARM-20 connector on the target
Converter from Intel MIPI60-Cv2 to Intel MIPI60-C pin-out on target
Combination of two converters to adapt from Intel MIPI60-Cv2 to MIPI20 pin-out on target
Converter to connect an IDC20A debug cable to the 34 pin DEBUG connector on a PowerTrace Serial. MIPI-34 connector does not have key pin. For connecting an IDC20A debug cable to an AutoFocus-II-MIPI preprocessor (LA-3160) or an AURORA 2 preprocessor (LA-3945) use the converter LA-3770 instead. (LA-2770 is for a MIPI34 connector with pin 1 on the right sight, while LA-3770 expects pin 1 on the left side at the target.)
Converter JTAG-RH850 of LA-3719 (Debugger RH850 14pin) and from AUTO26 of LA-2709 (Debugger for RH850/V850 Automotive PRO) LA-3205 (Debugger for RH850/V850 AUTO26 (PACK)) LA-3739 (Debugger RH850 Automotive) and Samtec 40 pin of LA-3943 (Preproc. RH850 HSTP HF-Flex) to Samtec ERF 34-pin RH850 pinout Includes Samtec 34-pin flex extension
supports SDMA includes software for Windows, Linux and macOS
Converter from Automotive Debug Cable (26-pin) to MICROCHIP-8 for LA-2760 (Debugger for Microchip PIC)
Converter from a MIPI20T to a MIPI34 connector, designed to connect a MIPI20T-HS Whisker (from a CombiProbe or MicroTrace) to a target with MIPI34 connector. Can be used for debugging with optional 4-bit trace if a MIPI34 connector is mounted on the target. There is a pin header to optionally receive trace signals from elsewhere. Can be used to connect the debug signals of a MIPI20T-HS Whisker to an AUTOFOCUS II MIPI preprocessor or a PowerTrace Serial.