Product Catalogue

Converter from Intel MIPI60-Cv2 to MIPI34 pin-out on target Converts termination scheme Intel (50 Ohm parallel termination at receiver) to termination scheme ARM (50 Ohm series termination at sender) Support for JTAG/SWD Maps Intel specific debug signals to MIPI34 pins. Default mapping: Intel PREQ -> DBGREQ (pin 18 on MIPI34) Intel PRDY -> DBGACK (pin 20 on MIPI34) Intel HOOK6 (PMODE) -> RTCK (pin 12 on MIPI34) Intel HOOK0 (PowerGood) -> BCE (pin 14 on MIPI34) Intel HOOK7 (ResetOut) -> RESET (pin 10 on MIPI34) TVREF (trace reference voltage) == DVREF (debug reference voltage) For other possible options, please contact Lauterbach.

Converter to connect an IDC20A Debug Cable to a MIPS-14 connector on the target Former name: Converter ARM-20 to MIPS-14

Converter to connect a MIPS Debug Cable to an ARM-20 connector on the target

Converter from Intel MIPI60-Cv2 to Intel MIPI60-C pin-out on target

Combination of two converters to adapt from Intel MIPI60-Cv2 to MIPI20 pin-out on target

Converter to connect an IDC20A debug cable to the 34 pin DEBUG connector on a PowerTrace Serial. MIPI-34 connector does not have key pin. For connecting an IDC20A debug cable to an AutoFocus-II-MIPI preprocessor (LA-3160) or an AURORA 2 preprocessor (LA-3945) use the converter LA-3770 instead. (LA-2770 is for a MIPI34 connector with pin 1 on the right sight, while LA-3770 expects pin 1 on the left side at the target.)

Converter JTAG-RH850 of LA-3719 (Debugger RH850 14pin) and from AUTO26 of LA-2709 (Debugger for RH850/V850 Automotive PRO) LA-3205 (Debugger for RH850/V850 AUTO26 (PACK)) LA-3739 (Debugger RH850 Automotive) and Samtec 40 pin of LA-3943 (Preproc. RH850 HSTP HF-Flex) to Samtec ERF 34-pin RH850 pinout Includes Samtec 34-pin flex extension

supports SDMA includes software for Windows, Linux and macOS

Converter from Automotive Debug Cable (26-pin) to MICROCHIP-8 for LA-2760 (Debugger for Microchip PIC)

Converter from a MIPI20T to a MIPI34 connector, designed to connect a MIPI20T-HS Whisker (from a CombiProbe or MicroTrace) to a target with MIPI34 connector. Can be used for debugging with optional 4-bit trace if a MIPI34 connector is mounted on the target. There is a pin header to optionally receive trace signals from elsewhere. Can be used to connect the debug signals of a MIPI20T-HS Whisker to an AUTOFOCUS II MIPI preprocessor or a PowerTrace Serial.

Converter from a MIPI20T to a MIPI60 connector, designed to connect a MIPI20T-HS Whisker (from a CombiProbe or MicroTrace) to a target with MIPI60 connector. Can be used for debugging with optional 4-bit trace if a MIPI60 connector is mounted on the target.

Converter from a MIPI20T to a MICTOR38 connector with ETM pin-out, designed to connect a MIPI20T-HS Whisker (from a CombiProbe or MicroTrace) to a target with MICTOR38 connector. Can be used for debugging with optional 4-bit trace if a MICTOR38 connector with 4-bit ETM pin-out is mounted on the target.

Converter from a MIPI20T to a TI-14 debug connector, designed to connect the debug lines of a MIPI20T-HS Whisker (from a CombiProbe or MicroTrace) to a target with TI-14 connector. Can be used for debugging if a TI-14 connector is mounted on the target, which is used on many targets with processors from Texas Instruments. There is a pin header to optionally receive trace signals from elsewhere.

Converter from Automotive Debug Cable (26-pin) to 14 Pin RH850 connector on target for LA-2709 Debugger for RH850/V850 Automotive PRO LA-3205 Debugger for RH850/V850 AUTO26 (PACK) LA-3739 Debugger for RH850 Automotive

Converter from 14 pin debug connector for RH850 to AUTO26 use with LA-3719 (Debugger for RH850) to connect to targets designed for LA-2709 Debugger for RH850/V850 Automotive PRO LA-3205 Debugger for RH850/V850 AUTO26 (PACK) LA-3739 Debugger for RH850 Automotive

Converter from 14 pin debug connector for RH850 to 20 pin N-Wire for V850 use with LA-3719 (Debugger for RH850)

supports AVR 8-Bit debugging and SPI programming includes software for Windows, Linux and macOS voltage range 1.8V to 5.5V

supports AVR8 please add the serial number of the existing debug cable to your order

supports ARP32 includes software for Windows, Linux and macOS

supports TriCore, PCP and GTM debugging included supports JTAG and DAP includes software for Windows, Linux and MacOSX requires Power Debug Interface USB 2.0/USB 3.0, Power Debug Ethernet, Power Trace Ethernet, Power Debug II or PowerDebug PRO AUTO26 debug cable voltage range 0.9V to 5.5V