Search results for "e2v"
Parallel NEXUS Adapter with AutoFocus technology for Qorivva MPC5xxx/SPC5xxx and PX series includes debugger for eTPU and GTM Concurrent debugging of multiple e200 cores on multicore processors requires a License for Multicore Debugging (LA-7960X) (not necessary for lockstep mode) Voltage range: 1..5 V TRACE port: 2..16 MDO (data) lines 1..2 MSEO (control) lines Data Bandwidth: up to 200 MBit/s 76-pin mictor connector requires one of the following converters LA-7631 for Mictor 38 on target LA-7632 for Glenair 51 on target LA-7636 for SAMTEC 50 on target LA-7637 for SAMTEC 20 on target includes software for Windows, Linux and MacOSX requires PowerTrace hardware usage with PowerTrace III requires TRACE32 software DVD 2021/09 or newer please contact Lauterbach if the serial number of your PowerTrace is lower than E03010003982
Supports Armv7-A/R based Cortex-A and Cortex-R 32-bit cores GTM and IPU debugging included IDC20A debug cable supports 5-pin standard JTAG, cJTAG and Serial Wire Debug Port, (0.4V - 5V) Includes software for Windows, Linux and macOS cJTAG and SWD require PowerDebug Interface USB 2.0/USB 3.0, PowerDebug Ethernet, PowerTrace, PowerDebug II PowerDebug PRO, PowerDebug E40 or PowerDebug X50
supports Qorivva MPC5xxx/SPC5xxx (e200 cores) and Freescale PX SERIES processors eTPU, GTM and SPT debugging included Concurrent debugging of multiple e200 cores on multicore processors requires a License for Multicore Debugging (LA-7960X) (not necessary for lockstep mode) includes software for Windows, Linux and MacOSX AUTO26 debug cable requires Power Debug Interface USB 2.0/USB 3.0, Power Debug Ethernet, Power Trace Ethernet, Power Debug II or PowerDebug PRO includes LA-3873 (Conv. AUTO26 to JTAG14 OnCE) voltage range 0.9V to 5.5V
Supports Arm Cortex-M cores and SecurCore SC000/SC300 trace support ETM Cortex-M via ETB included GTM and IPU debugging included IDC20A debug cable supports 5-pin standard JTAG, cJTAG and Serial Wire Debug Port, (0.4V - 5V) Includes software for Windows, Linux and macOS cJTAG and SWD require PowerDebug Interface USB 2.0/USB 3.0, PowerDebug Ethernet, PowerTrace, PowerDebug II PowerDebug PRO, PowerDebug E40 or PowerDebug X50
Supports Armv8 and Armv9 based Cortex-A, Cortex-R, Cortex-X and Neoverse 32/64-bit cores GTM, SPT, IPU and Multicore debugging included IDC20A debug cable supports 5-pin standard JTAG, cJTAG and Serial Wire Debug Port, (0.4V - 5V) Includes software for Windows, Linux and macOS cJTAG and SWD require PowerDebug Interface USB 2.0/USB 3.0, PowerDebug Ethernet, PowerTrace, PowerDebug II PowerDebug PRO, PowerDebug E40 or PowerDebug X50
Aurora NEXUS Preprocessor for Qorivva MPC57xx/SPC5 (high-speed serial trace port) - supports reference clock output up to 3125MHz POWER TRACE II: full support Supported speeds per lane: 4 lanes @ 4.25Gbps 3 lanes @ 6.0Gbps 2 lanes @ 6.25Gbps 1 lane @ 6.25Gbps POWER TRACE ETHERNET or POWER TRACE PX limited support Supported speeds per lane: 4 lanes @ 1.25 GBPS 2 lanes @ 2.5 GBPS - POWER TRACE ETHERNET module must have serial number E04xxxxxxxx or higher Required converter: - Samtec34 on target requires LA-3871: Converter Samtec40 HSTP+AUTO26+JTAG14 to Samtec34 including Samtec 34-pin flex extension cable - Samtec22 on target requires LA-3872: Converter Samtec40 HSTP+AUTO26+JTAG14 to Samtec22 including Samtec 22-pin flex extension cable voltage range 0.15V to 1.25V
Aurora NEXUS Preprocessor for Qorivva MPC57xx/SPC5 (high-speed serial trace port) - supports reference clock output up to 3125MHz POWER TRACE II / III: full support Supported speeds per lane: 4 lanes @ 4.25Gbps 3 lanes @ 6.0Gbps 2 lanes @ 6.25Gbps 1 lane @ 6.25Gbps POWER TRACE ETHERNET or POWER TRACE PX limited support Supported speeds per lane: 4 lanes @ 1.25 GBPS 2 lanes @ 2.5 GBPS - POWER TRACE ETHERNET module must have serial number E04xxxxxxxx or higher Required converter: - Samtec34 on target requires LA-3871: Converter Samtec40 HSTP+AUTO26+JTAG14 to Samtec34 including Samtec 34-pin flex extension cable - Samtec22 on target requires LA-3872: Converter Samtec40 HSTP+AUTO26+JTAG14 to Samtec22 including Samtec 22-pin flex extension cable voltage range 0.15V to 1.25V
Supports ARC EM/HS/EV/VPX, ARC 600/700, ARCtangent-A4/A5 includes software for Windows, Linux and MacOSX requires Power Debug Module IDC20A debug cable
Supports ARC EM/HS/EV/VPX, ARC 600/700, ARCtangent-A4/A5 Please add the base serial number of your existing debug cable to your order. LA-3750A in LA-3737 Debugger for TriCore Automotive can not be used to debug a stand-alone ARC chip LA-3750A can not be programmed on LA-7756 Debugger for TriCore Standard
Supports ARC EM/HS/EV/VPX, ARC 600/700, ARCtangent-A4/A5 Uses IDC20A debug cable, which supports 5-pin standard JTAG, cJTAG (IEEE 1149.7) and Serial Wire Debug (SWD), (0.4V - 5V) Includes software for Windows, Linux and macOS. Requires PowerDebug base module.