Search results for "dxcpl"

Adapter for debugging over a CAN bus with up to 1 Mbit/s supporting DAP over CAN Physical Layer (DXCPL) and more, with internal termination resistor. Usage with PowerDebug E40 / X50 / PRO requires one of the following: LA-3203 Debugger for TriCore AUTO26 (PACK), LA-3081 CombiProbe 2 for AUTO26 (PACK), LA-2707 Debugger for TriCore Automotive PRO (EOL). Usage with PowerDebug USB 3 / USB 2 / Ethernet / II requires one of the following:: LA-3203 Debugger for TriCore AUTO26 (PACK), LA-3081 CombiProbe 2 for AUTO26 (PACK), LA-2707 Debugger for TriCore Automotive PRO (EOL). LA-3737 Debugger for TriCore Automotive (EOL), LA-7756 Debugger for TriCore Standard (16-pin) (EOL).

AUTO26 Whisker for CombiProbe suitable for TriCore and dsPIC with 26-pin automotive connector, supporting DAP (DAP2, DAP3, DAP4, DAPWide), JTAG, DXCPL/DXCM. For optimal performance, we recommend using a DAP mode. DAP streaming is supported for TriCore (in DAP mode) and works most effectively with DAPWide (up to 320 Mbit/s). For DXCPL/DXCM, you will likely require the CAN-Box (LA-3889) as well. Voltage Range: 1.8V to 5.0V. Debug Clock Frequency: 10 kHz to 160 MHz Target Connector: AUTO26, AUTO20, AUTO10 Requires a CombiProbe or CombiProbe 2. For dsPIC only JTAG is supported and the converter LA-2773 to the 8-pin Microchip connector is recommended. Please note that TriCore SoCs usually support only 3.3V or 5V in DAP mode. Debug clock frequency in JTAG mode is typically limited to 40 MHz on TriCore SoCs (while up to 160 MHz is supported in DAP mode).

Supports TriCore, PCP and GTM debugging included. Supports JTAG, DAP, DXCPL, DXCM. Supports DAP streaming under certain conditions (see below). Includes the TRACE32 software for Windows, Linux and macOS on DVD and for download. Requires PowerDebug Interface USB 2.0/USB 3.0, PowerDebug Ethernet, PowerTrace Ethernet, PowerDebug II, PowerDebug PRO, PowerDebug E40 or PowerDebug X50. Requires LA-3849 if 16 pin JTAG (TriCore) connector is used. DAP Streaming is supported if you use the device with a PowerDebug PRO,E40, or X50 and your PowerView software is version R.2023.09 or newer (build 160619 or higher). If these requirements are met, DAP Streaming is possible only in DAP mode (DAP2, DAP3, DAPWide, DAP4). For performance reasons, we recommend DAPWide at 320 MHz. Trace display and analysis (based on DAP streaming, onchip-buffers, or a PowerTrace) requires LA-3799X (Trace License for TriCore ED). For DXCPL/DXCM you will probably also need the CAN-Box (LA-3889).

CombiProbe 2 with AUTO26 Whisker for debugging and DAP Streaming, supporting DAP (DAP2, DAP3, DAP4, DAPWide), JTAG, DXCPL/DXCM. For optimal performance, we recommend using a DAP mode. DAP streaming is supported for TriCore (in DAP mode) and works most effectively with DAPWide (up to 320 Mbit/s). For DXCPL/DXCM, you will likely require the CAN-Box (LA-3889) as well. Voltage Range: 1.8V to 5.0V. Debug Clock Frequency: 10 kHz to 160 MHz Target Connector: AUTO26, AUTO20, AUTO10 Trace Memory: 512 MByte. Includes the TRACE32 software for Windows, Linux and macOS on DVD and for download. Requires the following A-license: LA-7756A (Debugger for TriCore Standard Additional). Trace analysis and display requires LA-3799X (Trace License for TriCore ED). Requires Power Debug Interface USB 3.0,PowerDebug II, PowerDebug PRO, PowerDebug E40 or PowerDebug X50. Please note that TriCore SoCs usually support only 3.3V or 5V in DAP mode. Debug clock frequency in JTAG mode is typically limited to 40 MHz on TriCore SoCs (while up to 160 MHz is supported in DAP mode). Extend your CombiProbe with a Mixed-Signal Probe (LA-2500), to record digital and analog signals and correlate them with MCDS DAP streaming. (Requires PowerView R.2024.02 or higher).

Debug cable and 512-MByte of trace memory support for DAP Streaming Supports - DAP (DAP2, DAP3, DAPWide, DAP4): up to 160 MHz, 3.3 V or 5.0 V - JTAG: 1.8-5.0 V, up to 60 MHz - DXCPL DAP streaming requires a DAP mode. For performance reasons, we recommend DAPWide at 160 MHz. 26-pin Automotive Connector requires the following A-license: LA-7756A (Debugger for TriCore Standard Additional) trace analysis and display requires LA-3799X (Trace License for TriCore ED) requires Power Debug Interface USB 3.0, Power Debug II or PowerDebug PRO