Search results for "core"
Preprocessor for Beyond BA2x cores Instruction trace only 600 MBaud (300MHz clock speed, DDR) Variable threshold level and termination voltage, AUTOFOCUS self calibration technology, Supports 1.8 to 3.3V - otherwise contact support Requires PowerTrace II, PowerTrace PX or PowerTrace/Ethernet Version 6 or higher May require LA-3804 Converter Mictor 38 to XILINX XGI voltage range 1.2V to 3.3V
supports RH850 via JTAG, LPD4 ICU-M core support included supports V850 via NWIRE includes software for Windows, Linux and MacOSX requires Power Debug Interface USB 2.0/USB 3.0, Power Debug Ethernet, Power Trace Ethernet, Power Debug II, PowerDebug PRO or PowerDebug E40 debug cable with 26 pin connector includes LA-2700 (Conv. AUTO26 to JTAG14 RH850)
Parallel preprocessor for off-chip trace of CEVA-X cores. Includes connector cable and software. Voltage: 1.2 to 3.3V (contact support otherwise) Traceport: 1-32 bit Bandwidth: up to 600+ Mbit/s per trace signal Connector: Two 38 pin mictor connectors Variable threshold level and termination voltage, AUTOFOCUS self calibration technology Requires a PowerTrace module: PowerTrace PX / II / III (or PowerTrace Ethernet vers 6).
Supports Armv7-A/R based Cortex-A and Cortex-R 32-bit cores GTM and IPU debugging included IDC20A debug cable supports 5-pin standard JTAG, cJTAG and Serial Wire Debug Port, (0.4V - 5V) Includes software for Windows, Linux and macOS cJTAG and SWD require PowerDebug Interface USB 2.0/USB 3.0, PowerDebug Ethernet, PowerTrace, PowerDebug II PowerDebug PRO, PowerDebug E40 or PowerDebug X50
supports TriCore, PCP and GTM supports JTAG and DAP includes software for Windows, Linux and MacOSX requires Power Debug Module supports 16-pin standard JTAG 10-pin DAP interface requires LA-3815 and debug cable with serial number higher than C0809xxxxxxx Concurrent debugging of multiple TriCore cores on multicore processors requires a License for Multicore Debugging (LA-7960X) debugging HSM requires Cortex-M license LA-7844A (JTAG Debugger License for CORTEX-M Add.)
Parallel preprocessor for real-time tracing of C6000 cores via MICTOR38 connectors. Includes connector cable and software. Voltage: 1.2 to 3.3V (contact support otherwise) Traceport: 1-32 bit Bandwidth: up to 600+ Mbit/s per trace signal Connector: Two 38 pin mictor connectors Variable threshold level and termination voltage, AUTOFOCUS self calibration technology Requires a PowerTrace module: PowerTrace PX / II / III (or PowerTrace Ethernet vers 6).
Supports 78K0R and RL78 cores (16-bit). Uses IDC20A debug cable, which supports 5-pin standard JTAG, cJTAG (IEEE 1149.7) and Serial Wire Debug (SWD), (0.4V - 5V) Includes software for Windows, Linux and macOS. Requires PowerDebug base module. Not supported are the very old 1st Gen. PowerDebug modules LA-7702 (without USB) and LA-7704 (with USB 1.1).
Supports RH850 via JTAG, LPD4 ICU-M core support included supports V850 via NWIRE Includes software for Windows, Linux and macOS. Requires PowerDebug E40/X50, PowerDebug II or PRO, PowerDebug Interface USB 2.0/USB 3.0, PowerDebug Ethernet, PowerTrace Ethernet. Debug cable with 26 pin connector. Includes LA-2700 (Conv. AUTO26 to JTAG14 RH850) Voltage range 0.9V to 5.5V
Parallel preprocessor for real-time tracing of C6000 cores via a MIPI60 connector. Includes connector cable and software. Voltage: 1.2 to 3.3V (contact support otherwise) Traceport: 1-32 bit Bandwidth: up to 600+ Mbit/s per trace signal Connector: 60 pin Samtec connector (MIPI) Variable threshold level and termination voltage, AUTOFOCUS self calibration technology Requires a PowerTrace module: PowerTrace PX / II / III (or PowerTrace Ethernet vers 6).
Allows the use of the TRACE32 TQSK Base to qualify the TRACE32 Debugging and TRACE32 Code Coverage For Windows, Linux, and macOS. Floating license via RLM (Reprise License Manager) Please add the RLM HostID of the license server to your order (please see our FAQ)