Product Catalogue
Find TRACE32 product
Converter 26-pin Automotive Debug Cable to 16-pin JTAG (TriCore) also supporting DAP (2-wire) for LA-2707 Debugger for TriCore Automotive PRO LA-3203 Debugger for TriCore AUTO26 (PACK) LA-3737 JTAG Debugger for TriCore Automotive
Converter to connect an AutoFocus II Preprocessor with MICTOR-38 and an IDC20A Debug Cable to MIPI-10/-20/-34. Enables the AutoFocus II Preprocessor to receive trace data from the 4-bit wide trace port of a MIPI-34 target connector. The converter is configured for MIPI-34 via 0 Ohm resistors. By soldering the resistors differently MIPI-20T can be supported as well. You can get the same converter pre-configured for MIPI-20T by ordering LA-3809 Converter Mictor-38/IDC20A to MIPI-20T.
Converter 26-pin Automotive Debug Cable to 10-pin JTAG half-size (Automotive, ECU14) for LA-3203 (Debugger for TriCore AUTO26 (PACK)) LA-3205 (Debugger for RH850/V850 AUTO26 (PACK)) LA-3206 (Debugger for MPC5xxx AUTO26 (PACK)) LA-2707 (Debugger for TriCore Automotive PRO) LA-2708 (Debugger for MPC5xxx Automotive PRO) LA-2709 (Debugger for RH850/V850 Automotive PRO) LA-2713 (Debug-Bundle MPC5xxx/TriCore Automotive PRO) LA-2714 (Debug-Bundle TriCore/RH850 Automotive PRO) LA-3736 (JTAG Debugger for MPC5xxx Automotive) LA-3737 (JTAG Debugger for TriCore Automotive) LA-3738 (Debugger-Bundle MPC5xxx/TriCore Automotive) LA-3739 (Debugger for RH850/V850 Automotive) LA-3753 (Debugger-Bundle TriCore/RH850 Automotive) Converter 14-pin OnCE-PPC to 10-pin JTAG half-size (Automotive, ECU14) for LA-7753 (JTAG Debugger for MPC55xx/MPC56xx) Converter 16-pin TriCore to 10-pin JTAG half-size (Automotive, ECU14) also supporting DAP (2-wire) for LA-7756 (OCDS Debugger for TriCore)
supports Teaklite-4 interface includes software for Windows, Linux and MacOSX requires Power Debug Module debug cable with 20 pin connector
supports Teaklite-4 includes software for WINDOWS, HLL debugger Extension applicable to the following debug cables with serial number C0808xxxxxxx or higher please add the serial number of the existing debug cable to your order
supports TEAKLITE-4 requires a debug cable with serial number C0808xxxxxxx or higher requires a valid software guarantee or a valid software license key please add the serial number of the existing debug cable to your order
Converter to connect an ARM Preprocessor (16-bit PTM) to the OMAP5432 EVM (successor of the PandaBoard).
Converter 16-pin JTAG (TriCore) to 26-pin Automotive Debug Cable also supporting DAP (2-wire) for LA-7756 (OCDS Debugger for TriCore)
Converter from Beyond (20-pin) to NXP/Jennic (10-pin) LA-3793 (JTAG Debugger for Beyond)
Connector for Intel MIPI60 Converged on target to - Whisker MIPI60-Q for Quad-Probe x86/x64 - Prepro. for Intel® PT AUTOFOCUS MIPI60-P Connector for Intel MIPI60 Converged on target to - Whisker MIPI60-Cv2 for CombiProbe - Prepro. for Intel® PT AUTOFOCUS MIPI60-P
Converter to connect a Debug Cable to 10/20/34 pin connectors specified by MIPI.
Converter to connect a RH850 HSTP Aurora Preprocessor to the Renesas Evalboard: RH850-CCC-404PIN-PB-T1-V1
SABRE-AI to TRACE32 ADAPTER BOARD Convert Mictor38 to SABRE-AI Target Board
Converter for RH850-Samtec34 pinassignment to a target with a Samtec46 debug/trace connector.
Converter from IDC20A connector to MCHP FlashPro socket Target connector pitch can be 2.54mm or 1.27mm (half size) Usable for PolarFire SoC Icicle Kit
supports TriCore, PCP and GTM debugging included supports JTAG and DAP includes software for Windows, Linux and MacOSX requires Power Debug Interface USB 2.0/USB 3.0, Power Debug Ethernet, Power Trace Ethernet, Power Debug II, PowerDebug PRO or PowerDebug E40 Automotive Debug Cable 26-pin requires LA-3849 if 16 pin JTAG (TriCore) connector is used
Preprocessor for ST40 with AUD, 200 MHz clock speed with 36-pin Yamaichi connector Requires LA-7985 for 14 pin AUD connector voltage range 3.0V to 3.6V Requires PowerTrace Version 6 or higher or PowerTrace II / III
Preprocessor for NIOS-II, 150 MHz DDR clock speed, with MICTOR38 connector requires PowerTrace voltage range 1.5V to 5.0V
Converter Mictor connector to GPIO header of XILINX ML403/ML501 for Preprocessor for MicroBlaze (LA-3803) Preprocessor for Beyond AUTOFOCUS II (LA-3908)