|
|
- For MPC57XX and SPC57XX with "trace-to-memory" feature
- Program flow via Branch Trace Messages (BTM)
- Data Trace Messaging supported (DTM)
- Information on current task via Ownership Trace Messages (OTM)
- Supports onchip peripheral block tracing
- Supports timestamps generated by NEXUS clients
- Multicore tracing
- Comprehensive program profiling
- Target-OS aware profiling
|
 | |
|
|
- Support for NEXUS standard class 1 to 3+
- Easy high-level and assembler debugging
- Program flow and Data trace
- Watchpoint and Ownership tracing
- Up to 8 GByte trace memory
- Trigger programming
- Interface to all hosts
- USB and ETHERNET interface included
- Support for VLE (Variable Length Encoding)
- eTPU, GTM and SPT debuggers included
- eTPU program and data trace supported
- Data trace for additional trace clients (e.g. DMA, FlexRay)
|
| |
|
|
- Aurora NEXUS high-speed serial trace
- Program flow via Branch Trace Messages (BTM)
- Data Trace Messaging supported (DTM)
- Information on current task via Ownership Trace Messages (OTM)
- Supports onchip peripheral block tracing
- Supports timestamps generated by NEXUS clients as well as TRACE32 generated timestamps
- Multicore tracing
- Comprehensive program profiling
- Target-OS aware profiling
- AUTOSAR-aware profiling
- Code coverage
|
| |
|
|
- 4 GByte trace memory
- Universal module that is prelicensed for a trace protocol on delivery, additional trace protocol licenses can be added
- Aurora-based trace protocols up to 8 RX lanes, up to 12.5 Gbit/s per lane
- Speed booster TRACE32 Preprocessor Aurora 2 delivers up to 22.5 Gbit/s per lane for up to 4 lanes
- PCIe 3.0-based trace protocol up to 8 RX/TX lanes, up to 8 Gbit/s per lane
- Maximum bandwidth of 100 GBit/s
- Reference-clock and bit-clock support
- Fast trace upload to the host computer
- Support for TRACE32 Streaming up to 400 MByte/s
- TRACE32 Standard Probe/Analog Probe option
|
| |
Multichip and Multicore Support
|
- Support for JTAG daisy chain and multiple cores on SOC
- Debug multiple e200 cores (multicore license necessary):
- MPC5514, MPC5515, MPC5516, MPC5517
- MPC564xL, SPC564Lxx, MPC567xK, SPC56HKxx operated in decoupled parallel mode (DPM)
- MPC564xC, SPC56ECxx
- SPC56AP60
- MPC5668G
- MPC5676R
- MPC57XX (excluding MPC5726L, SPC572L, MPC5744P, SPC570S)
- PXS20xx, PXS30xx operated in decoupled parallel mode (DPM)
- PXN20xx
- Multicore license LA-7960X necessary to debug more than one core at a time
- Debugger for eTPU, GTM and SPT included (multicore license not required)
|
|
|
- Full debug support of GTM
- GTM trace - MCS (Multi Channel Sequencer)
- GTM trace - ARU (Advanced Routing Unit)
- GTM trace - I/O channels
|
| |
|
|
- Full support of eTPUs
- "Step" and "Go" commands
- Supports all eTPU Breakpoints
- Disassembler for Microinstructions
- Monitor all eTPU Registers during stepping
- Modify eTPU internal Registers
- Display of Entry Points
- Peripheral View of eTPU Registers
|
| |
 Flyer "Debug and Trace: NXP Qorivva MPC5xxx and STMicroelectronics SPC5xxx"
Important Product Information
|
LA-7753 JTAG Debugger Qorivva MPC5xxx/SPC5xxx with 14-pin OnCE connector
has been superseeded by LA-3736 JTAG Debugger for MPC5xxx Automotive with AUTO26 connector.
LA-3736 supports compared to LA-7753 additionally the following signals:
EVTI, EVTO, RESETOUT, watchdog disable and handshake signals for calibration tools.
In order to maintain compatibility to the 14-pin OnCE connector, LA-3736 includes an adapter that converts from AUTO26 to the standard 14-pin OnCE pinout.
|
|
|
- Debugger for all cores of a multicore chip / multiprocessor system
- Debugging of high-performance and real-time cores, DSPs, accelerator and special-purpose cores
- Support for every multicore topology
- Support for all multicore operation modes
- Support for AMP, iAMP and SMP systems
- Single debug hardware can be licensed for all cores of a multicore chip / multiprocessor system
|
| |
|
|
- Real-time, non-intrusive display of RTOS system resources
- Task stack coverage
- Task related breakpoints
- Task context display
- SMP support
- Task related performance measurement
- Statistic evaluation and graphic display of task run times
- Task related evaluation of function run times
- PRACTICE functions for OS data
- Easy access via RTOS specific pull-down menus
- Support for all major RTOSes
|
| |
|
|
- ORTI and ARTI compliant
- Single-core and SMP operating systems
- Support for all standard AUTOSAR providers such as Elektrobit, ETAS, Vector
- Concurrent debugging of multiple AUTOSAR Classic platforms
|
| |
|
|
- Structured Language
- Menu Support
- Command Logs
- Custom Menues
- Custom Toolbars and Buttons
- Custom Dialog Windows
- 64-Bit Arithmetic
- Numeric, Logical and String Operators
- Direct Access to System States
|
| |
|
