Search results for "v40"
supports TriCore, PCP and GTM debugging included supports JTAG and DAP includes software for Windows, Linux and MacOSX requires Power Debug Interface USB 2.0/USB 3.0, Power Debug Ethernet, Power Trace Ethernet, Power Debug II, PowerDebug PRO or PowerDebug E40 Automotive Debug Cable 26-pin requires LA-3849 if 16 pin JTAG (TriCore) connector is used
Adapter for NEXUS on Spanish Oak (MPC565), Silver Oak (MPC561) and Green Oak (MPC563) with 38 pin mictor connector includes software for Windows, Linux and MacOSX only with PowerTrace Ethernet 256MB/512MB or PowerTrace PX AMP40NS NEXUS connector requires LA-7793 AMP50 NEXUS connector requires LA-7794 GLENAIR51 NEXUS connector requires LA-7797
Supports TriCore, PCP and GTM debugging included. Supports JTAG, DAP, DXCPL, DXCM. Supports DAP streaming under certain conditions (see below). Includes the TRACE32 software for Windows, Linux and macOS on DVD and for download. Requires PowerDebug Interface USB 2.0/USB 3.0, PowerDebug Ethernet, PowerTrace Ethernet, PowerDebug II, PowerDebug PRO, PowerDebug E40 or PowerDebug X50. Requires LA-3849 if 16 pin JTAG (TriCore) connector is used. DAP Streaming is supported if you use the device with a PowerDebug PRO,E40, or X50 and your PowerView software is version R.2023.09 or newer (build 160619 or higher). If these requirements are met, DAP Streaming is possible only in DAP mode (DAP2, DAP3, DAPWide, DAP4). For performance reasons, we recommend DAPWide at 320 MHz. Trace display and analysis (based on DAP streaming, onchip-buffers, or a PowerTrace) requires LA-3799X (Trace License for TriCore ED). For DXCPL/DXCM you will probably also need the CAN-Box (LA-3889).
Preprocessor serial trace from QorIQ PowerPCs via Aurora. Includes Samtec 40-pin flex extension, converter to Samtec70, and software. Records up to 3 lanes with 6.25 Gbit/s per lane or 4 lane with 5.00 Gbit/s per lane. Voltage range: 0.15 to 1.25 differential Voltage. Requires PowerTrace II or PowerTrace III. For Samtec46 target connector, add LA-3831. For Samtec22 target connector, add LA-3832.
CombiProbe 2 with two whisker cables for dual core debugging with dsPIC. 26-pin Automotive Connector with converters for 8-pin Microchip Connector. Voltage range 1.8 to 5.0. Includes the TRACE32 software for Windows, Linux and macOS on DVD and for download. Requires the following A-license: LA-2760A (Debugger for PIC Additional) LA-7960X (License for Multicore Debugging). Requires Power Debug Interface USB 3.0, PowerDebug II, PowerDebug PRO, PowerDebug E40 or PowerDebug X50.
For debugging of Armv8 and Armv9 cores via Single Signal Debug Port (SSDP) Supports Armv8 and Armv9 based Cortex-A, Cortex-R, Cortex-X and Neoverse 32/64-bit cores. GTM, SPT, IPU and Multicore debugging included. Includes software for Windows, Linux and macOS. Requires PowerDebugInterface USB 2.0/USB 3.0, PowerDebugEthernet, PowerTrace Ethernet, PowerDebugII, PowerDebug PRO, PowerDebug E40 or PowerDebug X50. Requires PowerView software R.2024.02 or newer.
supports Qorivva MPC5xxx/SPC5xxx (e200 cores) and Freescale PX SERIES processors eTPU, GTM and SPT debugging included Concurrent debugging of multiple e200 cores on multicore processors requires a License for Multicore Debugging (LA-7960X) (not necessary for lockstep mode) includes software for Windows, Linux and MacOSX requires Power Debug Interface USB 2.0/USB 3.0, Power Debug Ethernet, Power Trace Ethernet, Power Debug II, PowerDebug PRO or PowerDebug E40 includes LA-3873 (Conv. AUTO26 to JTAG14 OnCE)
Trace recorder for serial high-speed ports with 4 Gigabyte trace memory for QorIQ PowerPC Records up to 8 lanes with 12.5 Gbit/s per lane (more with opt. Prepro.) Voltage range: 0.15 to 1.25 differential voltage. Includes flex exstension for Samtec40 target connector. For Samtec70 target connector add LA-3830. For Samtec46 target connector add LA-3831. For Samtec22 target connector add LA-3832. Requires PowerDebug X50, PowerDebug PRO, or PowerDebug II. Requires PC with USB 3 or Gigabit Ethernet, 4 GB RAM min, and 64-bit OS.
Trace recorder for serial high-speed ports with 8 Gigabyte trace memory for QorIQ PowerPC Records up to 8 lanes with 12.5 Gbit/s per lane (more with opt. Prepro.) Voltage range: 0.15 to 1.25 differential voltage. Includes flex exstension for Samtec40 target connector. For Samtec70 target connector add LA-3830. For Samtec46 target connector add LA-3831. For Samtec22 target connector add LA-3832. Requires PowerDebug X50, PowerDebug PRO, or PowerDebug II. Requires PC with USB 3 or Gigabit Ethernet, 4 GB RAM min, and 64-bit OS.
Adapter for debugging over a CAN bus with up to 1 Mbit/s supporting DAP over CAN Physical Layer (DXCPL) and more, with internal termination resistor. Usage with PowerDebug E40 / X50 / PRO requires one of the following: LA-3203 Debugger for TriCore AUTO26 (PACK), LA-3081 CombiProbe 2 for AUTO26 (PACK), LA-2707 Debugger for TriCore Automotive PRO (EOL). Usage with PowerDebug USB 3 / USB 2 / Ethernet / II requires one of the following:: LA-3203 Debugger for TriCore AUTO26 (PACK), LA-3081 CombiProbe 2 for AUTO26 (PACK), LA-2707 Debugger for TriCore Automotive PRO (EOL). LA-3737 Debugger for TriCore Automotive (EOL), LA-7756 Debugger for TriCore Standard (16-pin) (EOL).