Search results for "mentor"

Probe to record digital signals from a Mictor connector with differential clock signal: 33 Channels (32 Data, 1 pair of differential clock), 0..5 V Input, 4 pF, 50 kOhm. The probe requires one of the following modules. PowerIntegrator (LA-7940), PowerIntegrator II (LA-3940/3941/3942).

200 mm flex extension for Mictor 76pin connector

Probe to record differential digital signals from a Mictor connector: 17 Difference Channels (16 Data, 1 Clock), 0..5 V Input, 4 pF, 50 kOhm. The probe requires one of the following modules. PowerIntegrator (LA-7940), PowerIntegrator II (LA-3940/3941/3942), PowerTrace II (LA-7692/7693/7694), PowerTrace Serial (LA-3120/3520/3555/3560).

Converter for RX from 14 pin JTAG to Mictor 38 pin on target (only JTAG)

Converter Mictor connector to GPIO header of XILINX ML403/ML501 for Preprocessor for MicroBlaze (LA-3803) Preprocessor for Beyond AUTOFOCUS II (LA-3908)

Converter TEKTRONIX footprint to MICTOR connector for PowerIntegrator

Converter from a MIPI20T to a MICTOR38 connector with ETM pin-out, designed to connect a MIPI20T-HS Whisker (from a CombiProbe or MicroTrace) to a target with MICTOR38 connector. Can be used for debugging with optional 4-bit trace if a MICTOR38 connector with 4-bit ETM pin-out is mounted on the target.

Converter from SAMTEC60 + JTAG14 to MICTOR38 for MIPS

Converter for RX AUD Trace, JTAG14 and Yamaichi 36-pin to Mictor38

Converter to connect the ARM Debug Cable or the CombiProbe to a Mictor connector on the target. This is needed if you want to debug without a Preprocessor and if there is only a Mictor connector on the target. The trace signals of the CombiProbe are connected to the lowest four trace signals of the Mictor (ETMv3 pinout, continuous mode). But tracing is normally no use case due to the bandwidth limitations of the CombiProbe. Former name: ARM Conv. ARM-20/MIPI-34 to Mictor-38