Product Catalogue

Preprocessor for ARC Real-Time Trace (ARC RTT) Connector cable and software, 600 MHz clock speed, 8,16,32 Bit Trace Port width, Variable threshold level and termination voltage, AUTOFOCUS self calibration technology, Supports 1.2 to 3.3V - else contact support Requires PowerTrace Version 6 or higher or PowerTrace II / III

Parallel preprocessor for ARM cores Embedded Trace Macrocell (ETM), Program Trace Macrocell (PTM) Connector cable and software, Variable threshold level and termination voltage, AUTOFOCUS self calibration technology, Support all ETM modes Voltage: 1.2 to 3.3V - else contact support Traceport: 1-32bit Bandwidth: 9.6 Gbps (300MHz clock speed, DDR) Connector: 60 pin Samtec connector (MIPI) supports up to 4 trace sources (mix of TPIU and STM) Requires PowerTrace Version 6 or higher or PowerTrace II / III

Parallel preprocessor for ARM/Cortex Embedded Trace Macrocell (ETM), Program Trace Macrocell (PTM) Connector cable and software, Variable threshold level and termination voltage, AUTOFOCUS self calibration technology, Support all ETM modes, with 2 MICTOR connectors, Voltage: 1.2 to 3.3V - else contact support Traceport: 1-32bit Bandwidth: 9.6 Gbps (300MHz clock speed, DDR) Connector: 2x38 pin mictor connector Requires PowerTrace II / III, PowerTrace PX or PowerTrace/Ethernet Version 6 or higher

Supports ARC EM/HS/EV/VPX, ARC 600/700, ARCtangent-A4/A5 includes software for Windows, Linux and MacOSX requires Power Debug Module IDC20A debug cable

Supports ARC EM/HS/EV/VPX, ARC 600/700, ARCtangent-A4/A5 Please add the base serial number of your existing debug cable to your order. LA-3750A in LA-3737 Debugger for TriCore Automotive can not be used to debug a stand-alone ARC chip LA-3750A can not be programmed on LA-7756 Debugger for TriCore Standard

Supports ARC EM/HS/EV/VPX, ARC 600/700, ARCtangent-A4/A5 Uses IDC20A debug cable, which supports 5-pin standard JTAG, cJTAG (IEEE 1149.7) and Serial Wire Debug (SWD), (0.4V - 5V) Includes software for Windows, Linux and macOS. Requires PowerDebug base module.

Parallel Preprocessor for ARC Real-Time Trace (ARC RTT) supporting all RTT modes (MDO4, MDO8, MDO16, 2xMDO8, CoreSight) Includes connector cable and software. Voltage: 1.2 to 3.3V (contact support otherwise) Traceport: 1-32 bit Bandwidth: up to 600+ Mbit/s per trace signal Connector: Two 38 pin mictor connectors Variable threshold level and termination voltage, AUTOFOCUS self calibration technology Requires a PowerTrace module: PowerTrace PX / II / III (or PowerTrace Ethernet vers 6).

140 mm flex extension 60 pin SAMTEC QTH-QSH, e.g. Tricore with SAMTEC QTH connector LA-7928 e.g. ARM-ETM/AUTOFOCUS 600 MIPI LA-7993 e.g. Preprocessor for Intel® PT AUTOFOCUS MIPI60 LA-3907 similar in design as LA-1238, LA-1248 and LA-1249

330 mm flex extension 60 pin SAMTEC QTH-QSH, e.g. Tricore with SAMTEC QTH connector LA-7928 e.g. ARM-ETM/AUTOFOCUS 600 MIPI LA-7993 e.g. Preprocessor for Intel® PT AUTOFOCUS MIPI60 LA-3907 similar in design as LA-1228, LA-1248 and LA-1249

200 mm flex extension 60 pin SAMTEC QTH-QSH, e.g. WHISKER-QP-MIPI60-Q LA-4611 e.g. Tricore with SAMTEC QTH connector LA-7928 e.g. ARM-ETM/AUTOFOCUS 600 MIPI LA-7993 e.g. Preprocessor for Intel® PT AUTOFOCUS MIPI60 LA-3907 similar in design as LA-1228, LA-1238 and LA-1249

610 mm flex extension 60 pin SAMTEC QTH-QSH, e.g. WHISKER-QP-MIPI60-QL LA-4612 e.g. Tricore with SAMTEC QTH connector LA-7928 e.g. ARM-ETM/AUTOFOCUS 600 MIPI LA-7993 e.g. Preprocessor for Intel® PT AUTOFOCUS MIPI60 LA-3907 similar in design as LA-1228, LA-1238, and LA-1248