Product Catalogue

Converter for SH725x from 14 pin JTAG to Mictor 38 pin on target (only JTAG)

Converter for SH4 AUD Trace 36 pins of Yamaichi to JTAG and AUD pins of Mictor

Converter 14 pin and 36 pins of Yamaichi to JTAG and AUD pins of ERNI (inclusive adapter cables) For use with ETAS calibration tool

Preprocessor for RH850 with serial Nexus trace interface including Samtec 40-pin flex extension cable requires PowerTrace II Supported speeds per lane: 4 lanes at 4.25Gbps 3 lanes at 6.0Gbps 2 lanes at 6.25Gbps 1 lane at 6.25Gbps LA-3303 PowerTrace Serial 4 GigaByte RH850 Supports 8 lanes at 12.5Gbps voltage range 0.15V to 1.25V

Preprocessor for TriCore AGBT/SGBT Trace (Aurora high-speed trace). Full support via PowerTrace III and PowerTrace II with the following speed per lane: 4 lanes @ 4.25 Gbps, 3 lanes @ 6.00 Gbps, 2 lanes @ 6.25 Gbps, 1 lane @ 6.25 Gbps. Limited support via PowerTrace PX and PowerTrace Ethernet. with the following speed per lane: 4 lanes @ 1.25 Gbps, 2 lanes @ 2.50 Gbps. PowerTrace Ethernet must have serial number E04xxxxxxxx or higher. Voltage range 0.15V to 1.25V.

Serial preprocessor for C6000 with HSSTP Connector cable and software Supported maximum speed per lane: 4 lanes @ 5.00Gbps 3 lanes @ 6.25Gbps 2 lanes @ 6.25Gbps 1 lane @ 6.25Gbps Requires PowerTrace II / III voltage range 0.15V to 1.2V

Preprocessor for TriCore Aurora Giga-Bit Trace (Aurora high-speed trace) POWER TRACE II / III: full support Supported speeds per lane: 4 lanes @ 4.25Gbps 3 lanes @ 6.0Gbps 2 lanes @ 6.25Gbps 1 lane @ 6.25Gbps POWER TRACE ETHERNET or POWER TRACE PX limited support Supported speeds per lane: 4 lanes @ 1.25 GBPS 2 lanes @ 2.5 GBPS - POWER TRACE ETHERNET module must have serial number E04xxxxxxxx or higher voltage range 0.15V to 1.25V

Cost effective Trace Recorder with 1 GigaByte trace memory and a streaming rate up to 100 MByte/s. Supports parallel trace for up to 36 signals via a suitable preprocessor with the following maximum recording speed: 600+ Mbit/s per signal for 9 signals, 450 Mbit/s per signal for 17 signals, 225 Mbit/s per signal for 36 signals. Supports serial trace for up to 4 lanes via a serial preprocessor with the following maximum recording speed: 6.25 Gbit/s per lane for 2 lanes, 4.50 Gbit/s per lane for 3 lanes, 3.38 Gbit/s per lane for 4 lanes. Requires a suitable trace preprocessor or Nexus Adapter. Requires PowerDebug X50, PowerDebug PRO, or PowerDebug II.

Serial preprocessor for Arm-ETM with HSSTP Connector cable and software Supported maximum speed per lane: 4 lanes @ 5.00Gbps 3 lanes @ 6.25Gbps 2 lanes @ 6.25Gbps 1 lane @ 6.25Gbps Support ETMv1.x, ETMv3.x, ETMv4, all versions of CoreSight-ETM and Marvell's SETM Requires PowerTrace II / III voltage range 0.15V to 1.2V

Serial preprocessor for ARM-ETM with HSSTP Connector cable and software Supported maximum speed per lane: 4 lanes @ 5.00Gbps 3 lanes @ 6.25Gbps 2 lanes @ 6.25Gbps 1 lane @ 6.25Gbps Support ETMv1.x, ETMv3.x, ETMv4, all versions of CoreSight-ETM and Marvell's SETM Requires PowerTrace II / III voltage range 0.15V to 1.2V

Preprocessor for serial trace from VSPA processors. Includes Samtec 40-pin flex extension and software. Records up to 3 lanes with 6.25 Gbit/s per lane or 4 lane with 5.00 Gbit/s per lane. Voltage range: 0.15 to 1.25 differential Voltage. Requires PowerTrace II or PowerTrace III.

Serial preprocessor for CoreSight Real-Time Trace for Xtensa Includes Samtec 40-pin flex extension and software. Records up to 3 lanes with 6.25 Gbit/s per lane or 4 lane with 5.00 Gbit/s per lane. Voltage range: 0.15 to 1.25 differential Voltage. Requires PowerTrace II or PowerTrace III.

Serial preprocessor for tracing C6000 cores via AURORA Includes Samtec 40-pin flex extension and software. Records up to 3 lanes with 6.25 Gbit/s per lane or 4 lane with 5.00 Gbit/s per lane. Voltage range: 0.15 to 1.25 differential Voltage. Requires PowerTrace II or PowerTrace III.

Aurora NEXUS Preprocessor for Qorivva MPC57xx/SPC5 (high-speed serial trace port) - supports reference clock output up to 3125MHz POWER TRACE II: full support Supported speeds per lane: 4 lanes @ 4.25Gbps 3 lanes @ 6.0Gbps 2 lanes @ 6.25Gbps 1 lane @ 6.25Gbps POWER TRACE ETHERNET or POWER TRACE PX limited support Supported speeds per lane: 4 lanes @ 1.25 GBPS 2 lanes @ 2.5 GBPS - POWER TRACE ETHERNET module must have serial number E04xxxxxxxx or higher Required converter: - Samtec34 on target requires LA-3871: Converter Samtec40 HSTP+AUTO26+JTAG14 to Samtec34 including Samtec 34-pin flex extension cable - Samtec22 on target requires LA-3872: Converter Samtec40 HSTP+AUTO26+JTAG14 to Samtec22 including Samtec 22-pin flex extension cable voltage range 0.15V to 1.25V

Aurora NEXUS Preprocessor for Qorivva MPC57xx/SPC5 (high-speed serial trace port) - supports reference clock output up to 3125MHz POWER TRACE II / III: full support Supported speeds per lane: 4 lanes @ 4.25Gbps 3 lanes @ 6.0Gbps 2 lanes @ 6.25Gbps 1 lane @ 6.25Gbps POWER TRACE ETHERNET or POWER TRACE PX limited support Supported speeds per lane: 4 lanes @ 1.25 GBPS 2 lanes @ 2.5 GBPS - POWER TRACE ETHERNET module must have serial number E04xxxxxxxx or higher Required converter: - Samtec34 on target requires LA-3871: Converter Samtec40 HSTP+AUTO26+JTAG14 to Samtec34 including Samtec 34-pin flex extension cable - Samtec22 on target requires LA-3872: Converter Samtec40 HSTP+AUTO26+JTAG14 to Samtec22 including Samtec 22-pin flex extension cable voltage range 0.15V to 1.25V

Preprocessor serial trace from QorIQ PowerPCs via Aurora. Includes Samtec 40-pin flex extension, converter to Samtec70, and software. Records up to 3 lanes with 6.25 Gbit/s per lane or 4 lane with 5.00 Gbit/s per lane. Voltage range: 0.15 to 1.25 differential Voltage. Requires PowerTrace II or PowerTrace III. For Samtec46 target connector, add LA-3831. For Samtec22 target connector, add LA-3832.

supports C28x (0.4 V-5.25 V) CLA debugging included includes software for Windows, Linux and MacOSX requires Power Debug Module IDC20A debug cable Requires LA-7748 if 14 pin TI target adapter is used

Serial Trace Port Controller with 4 Giga Byte Trace Memory for TriCore AGBT requires PowerDebug II Ethernet or PowerDebug PRO Host requirements: USB 3.0 or 1000 MBit Ethernet interface, 4.0 GigaByte RAM voltage range 0.15V to 1.25V

Preprocessor for PPC4xx high speed trace port (Aurora based) up to 4 lanes, up to 6.5 Gbit/s per lane Requires PowerTrace II Converters for Samtec22/46/70 have to be ordered separately voltage range 0.15V to 1.25V

Preprocessor for QorIQ PowerPC high speed trace port (Aurora based) Connector cable and software up to 4 lanes, up to 6.5 Gbit/s per lane Requires PowerTrace II / III converters for Samtec22 or Samtec46 have to be ordered separately if required voltage range 0.15V to 1.25V