Chip: TC377TE
Vendor:
INFINEON
Family:
TriCore
Main Core:
TriCore v1.6.2
RECOMMENDED CONFIGURATIONS
Find the Ideal Tool Configuration for TC377TE
Throughout our recommended debug and trace solutions, you can easily find and select the most suitable tool configuration for your chip. Whether you need to perform simple hardware debugging or more advanced tasks such as off-chip tracing, the following TRACE32 configurations will provide you with a good starting point.
1/12: Debugger (2)
2/12: Debugger & On-Chip Trace (2)
3/12: Debugger & Off-Chip High-performance Aurora GigaBit Trace (AGBT) (1)
4/12: Debugger & Off-Chip High-performance Serial GigaBit Trace (HSTCU) (1)
5/12: Debugger & Off-Chip High-performance Serial GigaBit Trace (OCuLink) (1)
6/12: Debugger & Off-Chip Aurora GigaBit Trace (AGBT) (2)
7/12: CombiProbe TriCore DAP (2)
8/12: Debugging via CAN (2)
9/12: Debugging via XCP (1)
10/12: Debugging via XCP & On-Chip Trace (1)
11/12: Debugger for Virtual Targets (1)
12/12: TRACE32 Instruction Set Simulator (1)
Essential Debugger with USB
Hardware
Lauterbach PowerDebug E40 with AUTO26 debug probe
Software
Includes PowerView software, debug license and 1 year maintenance
PC connection
USB 3
Debug port
1 (AUTO26, AUTO20, AUTO10)
Debug clock
10 kHz to 160 MHz (depends on target)
Voltage range
1.8 V to 5.0 V
Multicore debugging
Yes, for same and other architectures via optional licenses
On-chip trace
via optional license
Off-chip trace
DAP streaming via optional license
Universal Debugger ready for PowerTrace
Hardware
Lauterbach PowerDebug X50 with AUTO26 debug probe
Software
Includes PowerView software, debug license and 1 year maintenance
PC connection
USB 3 and Gigabit Ethernet
Debug port
1 (AUTO26, AUTO20, AUTO10)
Debug clock
10 kHz to 160 MHz (depends on target)
Voltage range
1.8 V to 5.0 V
Multicore debugging
Yes, for same and other architectures via optional licenses
On-chip trace
via optional license
Off-chip trace
DAP streaming via optional license, AGBT/SGBT via optional PowerTrace Serial
Universal Debugger ready for PowerTrace
Hardware
Lauterbach PowerDebug X50 with AUTO26 debug probe
Software
Includes PowerView software, debug license and 1 year maintenance
PC connection
USB 3 and Gigabit Ethernet
Debug port
1 (AUTO26, AUTO20, AUTO10)
Debug clock
10 kHz to 160 MHz (depends on target)
Voltage range
1.8 V to 5.0 V
Multicore debugging
Yes, for same and other architectures via optional licenses
On-chip trace
via optional license
Off-chip trace
DAP streaming via optional license, AGBT/SGBT via optional PowerTrace Serial
Essential Debugger with USB
Hardware
Lauterbach PowerDebug E40 with AUTO26 debug probe
Software
Includes PowerView software, debug license and 1 year maintenance
PC connection
USB 3
Debug port
1 (AUTO26, AUTO20, AUTO10)
Debug clock
10 kHz to 160 MHz (depends on target)
Voltage range
1.8 V to 5.0 V
Multicore debugging
Yes, for same and other architectures via optional licenses
On-chip trace
via optional license
Off-chip trace
DAP streaming via optional license
Universal Debugger ready for PowerTrace
Hardware
Lauterbach PowerDebug X50 with AUTO26 debug probe
Software
Includes PowerView software, debug license and 1 year maintenance
PC connection
USB 3 and Gigabit Ethernet
Debug port
1 (AUTO26, AUTO20, AUTO10)
Debug clock
10 kHz to 160 MHz (depends on target)
Voltage range
1.8 V to 5.0 V
Multicore debugging
Yes, for same and other architectures via optional licenses
On-chip trace
via optional license
Off-chip trace
DAP streaming via optional license, AGBT/SGBT via optional PowerTrace Serial
Universal Debugger ready for PowerTrace
Hardware
Lauterbach PowerDebug X50 with AUTO26 debug probe
Software
Includes PowerView software, debug license and 1 year maintenance
PC connection
USB 3 and Gigabit Ethernet
Debug port
1 (AUTO26, AUTO20, AUTO10)
Debug clock
10 kHz to 160 MHz (depends on target)
Voltage range
1.8 V to 5.0 V
Multicore debugging
Yes, for same and other architectures via optional licenses
On-chip trace
via optional license
Off-chip trace
DAP streaming via optional license, AGBT/SGBT via optional PowerTrace Serial
Universal Debugger ready for PowerTrace
Hardware
Lauterbach PowerDebug X50 with AUTO26 debug probe
Software
Includes PowerView software, debug license and 1 year maintenance
PC connection
USB 3 and Gigabit Ethernet
Debug port
1 (AUTO26, AUTO20, AUTO10)
Debug clock
10 kHz to 160 MHz (depends on target)
Voltage range
1.8 V to 5.0 V
Multicore debugging
Yes, for same and other architectures via optional licenses
On-chip trace
via optional license
Off-chip trace
DAP streaming via optional license, AGBT/SGBT via optional PowerTrace Serial
Serial Trace (AGBT) with cost-effective PowerTrace II Lite
Debug Hardware
Lauterbach PowerDebug X50 with AUTO26 debug probe
Trace Hardware
PowerTrace II Lite with serial trace probe and AGBT adapter
Software
Includes PowerView software, debug license and 1 year maintenance
Multicore support
Yes, for same and other architectures via optional licenses
PC connection
USB 3 and Gigabit Ethernet
Debug Port
1 (AUTO26, AUTO20, AUTO10, 22-pin AGBT)
Serial trace lanes
up to 4
Recording speed
6.25 Gbit/s per lane @ 2 lanes, 3.38 Gbit/s per lane @ 4 lanes
Streaming
100 Mbyte/s
Trace Memory
1 GByte
Signal probing
not available
Serial Trace (AGBT) with universal PowerTrace III
Debug Hardware
Lauterbach PowerDebug X50 with AUTO26 debug probe
Trace Hardware
PowerTrace III with serial trace probe and AGBT adapter
Software
Includes PowerView software, debug license and 1 year maintenance
Multicore support
Yes, for same and other architectures via optional licenses
PC connection
USB 3 and Gigabit Ethernet
Debug Port
1 (AUTO26, AUTO20, AUTO10, 22-pin AGBT)
Serial trace lanes
up to 4
Recording speed
6.25 Gbit/s per lane @ 3 lanes, 5.00 Gbit/s per lane @ 4 lanes
Streaming
400 Mbyte/s
Trace Memory
8 GByte
Signal probing
via optional Mixed-Signal Probe
Debugger with Ethernet/USB for DAP streaming
Hardware
PowerDebug X50 with CombiProbe 2 and AUTO26 Whisker
Software
Includes PowerView software, debug license and 1 year maintenance
PC connection
USB 3 and Gigabit Ethernet
Debug & Trace port
1 (AUTO26, AUTO20, AUTO10)
Multicore debugging
Yes, for same and other architectures via optional licenses
Trace Memory
512 MByte
Signal probing
via optional Mixed-Signal Probe
Debugger with USB for DAP streaming
Hardware
PowerDebug E40 with CombiProbe 2 and AUTO26 Whisker
Software
Includes PowerView software, debug license and 1 year maintenance
PC connection
USB 3
Debug & Trace port
1 (AUTO26, AUTO20, AUTO10)
Multicore debugging
Yes, for same and other architectures via optional licenses
Trace Memory
512 MByte
Signal probing
via optional Mixed-Signal Probe
Debug Solution with Ethernet/USB for "DAP over CAN" (DxCPL/DxCM)
Hardware
PowerDebug X50, AUTO26 debug probe and CAN Box
Software
Includes PowerView software, debug license and 1 year maintenance
PC connection
USB 3 and Gigabit Ethernet
CAN connector
9-pin male D-Sub connector
Multicore debugging
Yes, for same and other architectures via optional licenses
Debug Solution with USB for "DAP over CAN" (DxCPL/DxCM)
Hardware
PowerDebug E40, AUTO26 debug probe and CAN Box
Software
Includes PowerView software, debug license and 1 year maintenance
PC connection
USB 3
CAN connector
9-pin male D-Sub connector
Multicore debugging
Yes, for same and other architectures via optional licenses
Debugging via Calibration Tools (XCP)
Supported API
Universal Measurement and Calibration Protocol (XCP)
Content
Includes PowerView software, front-end license, XCP backend-license, and 1 year maintenance
Licenses Options
Trace decoder license
Debugging via Calibration Tools (XCP)
Supported API
Universal Measurement and Calibration Protocol (XCP)
Content
Includes PowerView software, front-end license, XCP backend-license, and 1 year maintenance
Licenses Options
Trace decoder license
Debugging via 3rd party API
Supported High-Level APIs
MCD, GDB, CADI, IRIS, GDI, ARCINT (depends on CPU architecture)
Supported Low-Level APIs
XCP, GTL, CSWP, SPP, VPI, DCI.DbC, Tessent/USOC (depends on CPU architecture)
Content
Includes PowerView software, front-end license and 1 year maintenance
Licenses Options
Backend-license for low-level APIs, Trace decoder license
Instruction Set Simulator
Simulator
Simulates the instruction set of an architecture family (including its subfamilies)
Extendable
Models of memory mapped peripheral can be connected
Automated testing
The included license allows automated tests with the simulator.
Content
Includes PowerView software, simulator license and 1 year maintenance