Chip: Cortex-M33F
Vendor:
ARM
Family:
Cortex-M_Armv8M
Main Core:
Cortex-M33F
RECOMMENDED CONFIGURATIONS
Find the Ideal Tool Configuration for Cortex-M33F
Throughout our recommended debug and trace solutions, you can easily find and select the most suitable tool configuration for your chip. Whether you need to perform simple hardware debugging or more advanced tasks such as off-chip tracing, the following TRACE32 configurations will provide you with a good starting point.
1/14: µTrace (1)
2/14: CombiProbe (2)
3/14: Debugger (2)
4/14: Debugger & On-Chip Trace (2)
5/14: Debugger & Off-Chip Trace STM-TPIU (2)
6/14: Debugger & Off-Chip Trace TPIU (2)
7/14: Debugger & Off-Chip Trace HSSTP up to 6.25 Gbit/s (2)
8/14: Debugger & Off-Chip Trace HSSTP up to 12.5 Gbit/s (1)
9/14: Debugger & Off-Chip Trace HSSTP up to 22.5 Gbit/s (1)
10/14: Debugger & Off-Chip Trace PCIe PowerTrace Serial (1)
11/14: Debugging via XCP (1)
12/14: Debugging via XCP & On-Chip Trace (1)
13/14: TRACE32 Instruction Set Simulator (1)
14/14: Debugger for Virtual Targets (1)
Debug Solution for Cortex-M
Hardware
Lauterbach µTrace for Cortex-M with MIPI20-HS whisker
Software
Includes PowerView software, debug license and 1 year maintenance
PC connection
USB 3
Debug port
1 (MIPI20T, MIPI10, IDC20A)
Supported Chips
All Cortex-M chips
Multicore debugging
Among Cortex-M cores via optional license
On-chip trace
Included (if supported by chip)
Off-chip trace
Included (if supported by chip)
Recording speed
400 Mbit/s per signal (1.6 Gbit/s total)
Streaming
140 Mbyte/s
Trace Memory
256 MByte
Signal probing
via optional Mixed-Signal Probe
Debug & Trace solution with Ethernet for up to 2 target connections
Hardware
Lauterbach PowerDebug X50 with CombiProbe 2 and MIPI20-HS whisker
Software
Includes PowerView software, debug license and 1 year maintenance
PC connection
USB 3 and Gigabit Ethernet
Debug & Trace ports
1 by default, 2 with extra whisker
Multicore debugging
Yes, for same and other architectures via optional licenses
On-chip trace
via optional license
Off-chip trace
supports 4-bit ETM and ITM (on each port)
Recording speed
400 Mbit/s per signal (3.2 Gbit/s total)
Streaming
140 Mbyte/s
Trace Memory
512 MByte
Signal probing
via optional Mixed-Signal Probe
Debug & Trace solution with USB for up to 2 target connections
Hardware
Lauterbach PowerDebug E40 with CombiProbe 2 and MIPI20-HS whisker
Software
Includes PowerView software, debug license and 1 year maintenance
PC connection
USB 3
Debug & Trace ports
1 by default, 2 with extra whisker
Multicore debugging
Yes, for same and other architectures via optional licenses
On-chip trace
via optional license
Off-chip trace
supports 4-bit ETM and ITM (on each port)
Recording speed
400 Mbit/s per signal (3.2 Gbit/s total)
Streaming
140 Mbyte/s
Trace Memory
512 MByte
Signal probing
via optional Mixed-Signal Probe
Universal Debugger ready for PowerTrace
Hardware
Lauterbach PowerDebug X50 with IDC20A debug probe
Software
Includes PowerView software, debug license and 1 year maintenance
PC connection
USB 3 and Gigabit Ethernet
Debug port
1 (IDC20A)
Debug clock
10 kHz to 100 MHz (depends on target)
Voltage range
0.4 V to 5.0 V
Multicore debugging
Yes, for same and other architectures via optional licenses
On-chip trace
via optional license
Off-chip trace
via optional PowerTrace or CombiProbe extension
Essential Debugger with USB
Hardware
Lauterbach PowerDebug E40 with IDC20A debug probe
Software
Includes PowerView software, debug license and 1 year maintenance
PC connection
USB 3
Debug port
1 (IDC20A)
Debug clock
10 kHz to 100 MHz (depends on target)
Voltage range
0.4 V to 5.0 V
Multicore debugging
Yes, for same and other architectures via optional licenses
On-chip trace
via optional license
Off-chip trace
via optional CombiProbe extension (for 4 bit trace ports)
Universal Debugger ready for PowerTrace
Hardware
Lauterbach PowerDebug X50 with IDC20A debug probe
Software
Includes PowerView software, debug license and 1 year maintenance
PC connection
USB 3 and Gigabit Ethernet
Debug port
1 (IDC20A)
Debug clock
10 kHz to 100 MHz (depends on target)
Voltage range
0.4 V to 5.0 V
Multicore debugging
Yes, for same and other architectures via optional licenses
On-chip trace
via optional license
Off-chip trace
via optional PowerTrace or CombiProbe extension
Essential Debugger with USB
Hardware
Lauterbach PowerDebug E40 with IDC20A debug probe
Software
Includes PowerView software, debug license and 1 year maintenance
PC connection
USB 3
Debug port
1 (IDC20A)
Debug clock
10 kHz to 100 MHz (depends on target)
Voltage range
0.4 V to 5.0 V
Multicore debugging
Yes, for same and other architectures via optional licenses
On-chip trace
via optional license
Off-chip trace
via optional CombiProbe extension (for 4 bit trace ports)
Debug & Trace solution with Ethernet for up to 2 target connections
Hardware
Lauterbach PowerDebug X50 with CombiProbe 2 and MIPI20-HS whisker
Software
Includes PowerView software, debug license and 1 year maintenance
PC connection
USB 3 and Gigabit Ethernet
Debug & Trace ports
1 by default, 2 with extra whisker
Multicore debugging
Yes, for same and other architectures via optional licenses
On-chip trace
via optional license
Off-chip trace
supports 4-bit ETM and ITM (on each port)
Recording speed
400 Mbit/s per signal (3.2 Gbit/s total)
Streaming
140 Mbyte/s
Trace Memory
512 MByte
Signal probing
via optional Mixed-Signal Probe
Debug & Trace solution with USB for up to 2 target connections
Hardware
Lauterbach PowerDebug E40 with CombiProbe 2 and MIPI20-HS whisker
Software
Includes PowerView software, debug license and 1 year maintenance
PC connection
USB 3
Debug & Trace ports
1 by default, 2 with extra whisker
Multicore debugging
Yes, for same and other architectures via optional licenses
On-chip trace
via optional license
Off-chip trace
supports 4-bit ETM and ITM (on each port)
Recording speed
400 Mbit/s per signal (3.2 Gbit/s total)
Streaming
140 Mbyte/s
Trace Memory
512 MByte
Signal probing
via optional Mixed-Signal Probe
Cost-Effective Parallel Trace
Debug Hardware
Lauterbach PowerDebug X50 with debug probe
Trace Hardware
PowerTrace II Lite with AutoFocus II trace probe
Software
Includes PowerView software, debug license and 1 year maintenance
Multicore support
Yes, for same and other architectures via optional licenses
PC connection
USB 3 and Gigabit Ethernet
Debug Port
1
Trace Port
2x MICTOR38 connectors for one port with up to 36 signals
Recording speed
450 Mbit/s per signal for 17 signal
Streaming
100 Mbyte/s
Trace Memory
1 GByte
Signal probing
not available
High-performance Parallel Trace
Debug Hardware
Lauterbach PowerDebug X50 with debug probe
Trace Hardware
PowerTrace III with AutoFocus II trace probe
Software
Includes PowerView software, debug license and 1 year maintenance
Multicore support
Yes, for same and other architectures via optional licenses
PC connection
USB 3 and Gigabit Ethernet
Debug Port
1
Trace Port
2x MICTOR38 connectors for one port with up to 36 signals
Recording speed
600+ Mbit/s per signal for 17 signal
Streaming
400 Mbyte/s
Trace Memory
8 GByte
Signal probing
via optional Mixed-Signal Probe
Serial Trace with universal PowerTrace III
Debug Hardware
Lauterbach PowerDebug X50 with debug probe
Trace Hardware
PowerTrace III with serial trace probe
Software
Includes PowerView software, debug license and 1 year maintenance
Multicore support
Yes, for same and other architectures via optional licenses
PC connection
USB 3 and Gigabit Ethernet
Debug Port
1
Serial trace lanes
up to 4
Recording speed
6.25 Gbit/s per lane @ 3 lanes, 5.00 Gbit/s per lane @ 4 lanes
Streaming
400 Mbyte/s
Trace Memory
8 GByte
Signal probing
via optional Mixed-Signal Probe
Serial Trace with cost-effective PowerTrace II Lite
Debug Hardware
Lauterbach PowerDebug X50 with debug probe
Trace Hardware
PowerTrace II Lite with serial trace probe
Software
Includes PowerView software, debug license and 1 year maintenance
Multicore support
Yes, for same and other architectures via optional licenses
PC connection
USB 3 and Gigabit Ethernet
Debug Port
1
Serial trace lanes
up to 4
Recording speed
6.25 Gbit/s per lane @ 2 lanes, 3.38 Gbit/s per lane @ 4 lanes
Streaming
100 Mbyte/s
Trace Memory
1 GByte
Signal probing
not available
High-performance Serial Trace
Debug Hardware
Lauterbach PowerDebug X50 with debug probe
Trace Hardware
PowerTrace Serial 2
Software
Includes PowerView software, debug license and 1 year maintenance
Multicore support
Yes, for same and other architectures via optional licenses
PC connection
USB 3 and Gigabit Ethernet
Debug Port
1
Serial trace lanes
Up to 8 (Just 6 with shown flex cable)
Recording speed
12.5 Gbit/s per lane @ 8 lanes
Streaming
400 Mbyte/s
Trace Memory
8 GByte
Signal probing
via optional Mixed-Signal Probe
Serial Trace with Aurora 2 probe for highest speeds
Debug Hardware
Lauterbach PowerDebug X50 with debug probe
Trace Hardware
PowerTrace Serial 2 with Aurora 2 trace probe
Software
Includes PowerView software, debug license and 1 year maintenance
Multicore support
Yes, for same and other architectures via optional licenses
PC connection
USB 3 and Gigabit Ethernet
Debug Port
1
Serial trace lanes
up to 8
Recording speed
22.5 Gbit/s per lane @ 4 lanes, 12.5 Gbit/s per lane @ 8 lanes
Streaming
400 Mbyte/s
Trace Memory
8 GByte
Signal probing
via optional Mixed-Signal Probe
Serial Trace via PCIe
Debug Hardware
Lauterbach PowerDebug X50 with debug probe
Trace Hardware
PowerTrace Serial 2
Software
Includes PowerView software, debug license and 1 year maintenance
Multicore support
Yes, for same and other architectures via optional licenses
PC connection
USB 3 and Gigabit Ethernet
Debug Port
1
Serial trace lanes
up to 8
Recording speed
PCIe Gen 2 and 3 (8 Gbit/s per lane), PCIe Gen 4 (16 Gbit/s per lane) with optional trace probe
Streaming
400 Mbyte/s
Trace Memory
8 GByte
Signal probing
via optional Mixed-Signal Probe
Debugging via Calibration Tools (XCP)
Supported API
Universal Measurement and Calibration Protocol (XCP)
Content
Includes PowerView software, front-end license, XCP backend-license, and 1 year maintenance
Licenses Options
Trace decoder license
Debugging via Calibration Tools (XCP)
Supported API
Universal Measurement and Calibration Protocol (XCP)
Content
Includes PowerView software, front-end license, XCP backend-license, and 1 year maintenance
Licenses Options
Trace decoder license
Instruction Set Simulator
Simulator
Simulates the instruction set of an architecture family (including its subfamilies)
Extendable
Models of memory mapped peripheral can be connected
Automated testing
The included license allows automated tests with the simulator.
Content
Includes PowerView software, simulator license and 1 year maintenance
Debugging via 3rd party API
Supported High-Level APIs
MCD, GDB, CADI, IRIS, GDI, ARCINT (depends on CPU architecture)
Supported Low-Level APIs
XCP, GTL, CSWP, SPP, VPI, DCI.DbC, Tessent/USOC (depends on CPU architecture)
Content
Includes PowerView software, front-end license and 1 year maintenance
Licenses Options
Backend-license for low-level APIs, Trace decoder license