Chip: ATSAMS70N20
Vendor:
MICROCHIP
Family:
ATSAM
Cores:
Cortex-M7F
RECOMMENDED CONFIGURATIONS
Find the Ideal Tool Configuration for ATSAMS70N20
Throughout our recommended debug and trace solutions, you can easily find and select the most suitable tool configuration for your chip. Whether you need to perform simple hardware debugging or more advanced tasks such as off-chip tracing, the following TRACE32 configurations will provide you with a good starting point.
1/5: µTrace (1)
Debug Solution for Cortex-M
Hardware
Lauterbach µTrace for Cortex-M with MIPI20-HS whisker
Software
Includes PowerView software, debug license and 1 year maintenance
PC connection
USB 3
Debug port
1 (MIPI20T, MIPI10, IDC20A)
Supported Chips
All Cortex-M chips
Multicore debugging
Among Cortex-M cores via optional license
On-chip trace
Included (if supported by chip)
Off-chip trace
Included (if supported by chip)
Recording speed
400 Mbit/s per signal (1.6 Gbit/s total)
Streaming
140 MByte/s
Trace Memory
256 MByte
Signal probing
via optional Mixed-Signal Probe
2/5: CombiProbe (2)
Debug & Trace solution with USB for up to 2 target connections
Hardware
Lauterbach PowerDebug E40 with CombiProbe 2 and MIPI20-HS whisker
Software
Includes PowerView software, debug license and 1 year maintenance
PC connection
USB 3
Debug & Trace ports
1 by default, 2 with extra whisker
Multicore debugging
Yes, for same and other architectures via optional licenses
On-chip trace
Included for Cortex-M (if supported by chip)
Off-chip trace
Supports 4-bit ETM and ITM (on each port)
Recording speed
400 Mbit/s per signal (3.2 Gbit/s total)
Streaming
140 MByte/s
Trace Memory
512 MByte
Signal probing
via optional Mixed-Signal Probe
Debug & Trace solution with Ethernet for up to 2 target connections
Hardware
Lauterbach PowerDebug X50 with CombiProbe 2 and MIPI20-HS whisker
Software
Includes PowerView software, debug license and 1 year maintenance
PC connection
USB 3 and Gigabit Ethernet
Debug & Trace ports
1 by default, 2 with extra whisker
Multicore debugging
Yes, for same and other architectures via optional licenses
On-chip trace
Included for Cortex-M (if supported by chip)
Off-chip trace
Supports 4-bit ETM and ITM (on each port)
Recording speed
400 Mbit/s per signal (3.2 Gbit/s total)
Streaming
140 MByte/s
Trace Memory
512 MByte
Signal probing
via optional Mixed-Signal Probe
3/5: Debugger (2)
Essential Debugger with USB
Hardware
Lauterbach PowerDebug E40 with IDC20A debug probe
Software
Includes PowerView software, debug license and 1 year maintenance
PC connection
USB 3
Debug port
1 (IDC20A)
Debug clock
10 kHz to 100 MHz (depends on target)
Voltage range
0.4 V to 5.0 V
Multicore debugging
Yes, for same and other architectures via optional licenses
On-chip trace
Included for Cortex-M (if supported by chip)
Off-chip trace
via optional CombiProbe extension (for 4 bit trace ports)
Universal Debugger ready for PowerTrace
Hardware
Lauterbach PowerDebug X50 with IDC20A debug probe
Software
Includes PowerView software, debug license and 1 year maintenance
PC connection
USB 3 and Gigabit Ethernet
Debug port
1 (IDC20A)
Debug clock
10 kHz to 100 MHz (depends on target)
Voltage range
0.4 V to 5.0 V
Multicore debugging
Yes, for same and other architectures via optional licenses
On-chip trace
Included for Cortex-M (if supported by chip)
Off-chip trace
via optional PowerTrace or CombiProbe extension
4/5: Debugging via XCP (1)
Debugging via Calibration Tools (XCP)
Supported API
Universal Measurement and Calibration Protocol (XCP)
Content
Includes PowerView software, front-end license, XCP backend-license, and 1 year maintenance
Licenses Options
Trace decoder license
5/5: TRACE32 Instruction Set Simulator (1)
Instruction Set Simulator
Simulator
Simulates the instruction set of an architecture family (including its subfamilies)
Extendable
Models of memory mapped peripheral can be connected
Automated testing
The included license allows automated tests with the simulator.
Content
Includes PowerView software, simulator license and 1 year maintenance