Chip: AM6546
Vendor:
TI
Family:
AM6xxx
Cores:
Cortex-A53, Cortex-R5F, Cortex-M3, PRU
RECOMMENDED CONFIGURATIONS
Find the Ideal Tool Configuration for AM6546
Throughout our recommended debug and trace solutions, you can easily find and select the most suitable tool configuration for your chip. Whether you need to perform simple hardware debugging or more advanced tasks such as off-chip tracing, the following TRACE32 configurations will provide you with a good starting point.
1/5: Debugger with optional On-Chip Trace (2)
Essential Debugger with USB
Hardware
Lauterbach PowerDebug E40 with IDC20A debug probe
Software
Includes PowerView software, debug license and 1 year maintenance
PC connection
USB 3
Debug port
1 (IDC20A)
Debug clock
10 kHz to 100 MHz (depends on target)
Voltage range
0.4 V to 5.0 V
Multicore debugging
Yes, for same and other architectures via optional licenses
On-chip trace
via optional license
Off-chip trace
via optional CombiProbe extension (for 4 bit trace ports)
Universal Debugger ready for PowerTrace
Hardware
Lauterbach PowerDebug X50 with IDC20A debug probe
Software
Includes PowerView software, debug license and 1 year maintenance
PC connection
USB 3 and Gigabit Ethernet
Debug port
1 (IDC20A)
Debug clock
10 kHz to 100 MHz (depends on target)
Voltage range
0.4 V to 5.0 V
Multicore debugging
Yes, for same and other architectures via optional licenses
On-chip trace
via optional license
Off-chip trace
via optional PowerTrace or CombiProbe extension
2/5: Debugger & Off-Chip Trace STM-TPIU (2)
Essential Debugger with USB and System Trace support
Hardware
Lauterbach PowerDebug E40 with CombiProbe 2
Software
Includes PowerView software, debug license and 1 year maintenance
PC connection
USB 3
Debug & Trace port
1 by default, 2 with extra whisker
Multicore debugging
Yes, for same and other architectures via optional licenses
On-chip trace
via optional license
Off-chip trace
4 bit parallel trace ports (for e.g. STP/STM) on each port
Recording speed
400 Mbit/s per signal (3.2 Gbit/s total)
Streaming
140 MByte/s
Trace Memory
512 MByte
Signal probing
via optional Mixed-Signal Probe
Universal Debugger with Ethernet/USB and System Trace support
Hardware
Lauterbach PowerDebug X50 with CombiProbe 2
Software
Includes PowerView software, debug license and 1 year maintenance
PC connection
USB 3 and Gigabit Ethernet
Debug & Trace port
1 by default, 2 with extra whisker
Multicore debugging
Yes, for same and other architectures via optional licenses
On-chip trace
via optional license
Off-chip trace
4 bit parallel trace ports (for e.g. STP/STM) on each port
Recording speed
400 Mbit/s per signal (3.2 Gbit/s total)
Streaming
140 MByte/s
Trace Memory
512 MByte
Signal probing
via optional Mixed-Signal Probe
3/5: Debugger & Off-Chip Trace TPIU (2)
Cost-Effective Parallel Trace
Debug Hardware
Lauterbach PowerDebug X50 with debug probe
Trace Hardware
PowerTrace II Lite with AutoFocus II trace probe
Software
Includes PowerView software, debug license and 1 year maintenance
Multicore support
Yes, for same and other architectures via optional licenses
PC connection
USB 3 and Gigabit Ethernet
Debug Port
1
Trace Port
2x MICTOR38 connectors for one port with up to 36 signals
Recording speed
450 Mbit/s per signal for 17 signal
Streaming
100 MByte/s
Trace Memory
1 GByte
Signal probing
not available
High-performance Parallel Trace
Debug Hardware
Lauterbach PowerDebug X50 with debug probe
Trace Hardware
PowerTrace III with AutoFocus II trace probe
Software
Includes PowerView software, debug license and 1 year maintenance
Multicore support
Yes, for same and other architectures via optional licenses
PC connection
USB 3 and Gigabit Ethernet
Debug Port
1
Trace Port
2x MICTOR38 connectors for one port with up to 36 signals
Recording speed
600+ Mbit/s per signal for 17 signal
Streaming
400 MByte/s
Trace Memory
8 GByte
Signal probing
via optional Mixed-Signal Probe
4/5: Debugging via XCP with optional On-Chip Trace (1)
Debugging via Calibration Tools (XCP)
Supported API
Universal Measurement and Calibration Protocol (XCP)
Content
Includes PowerView software, front-end license, XCP backend-license, and 1 year maintenance
Licenses Options
Trace decoder license
5/5: TRACE32 Instruction Set Simulator (1)
Instruction Set Simulator
Simulator
Simulates the instruction set of an architecture family (including its subfamilies)
Extendable
Models of memory mapped peripheral can be connected
Automated testing
The included license allows automated tests with the simulator.
Content
Includes PowerView software, simulator license and 1 year maintenance