Product Catalogue

Converter SiFive PIB for PMOD to ribbon cable. PIB stands for "Probe Interface Block", which is an external parallel trace interface specified by SiFive for RISC-V trace. Use this converter togehter with LA-2730 (Converter MIPI-20T to IDC20A) and LA-3080 (CombiProbe 2 for MIPI20T-HS (PACK)) to receive RISC-V trace from a PMOD connector via a CombiProbe. This converter adapts from SiFive's 2x6 PMOD pin layout for PIB to the Lauterbach 10pin (2x5) ribbon cable. The other side of the 10pin ribbon cable is usally conntected to the Lauterbach converter LA-2730 (MIPI-20T to IDC20A).

Converter from IDC20A to 12 pin PMOD connectors with the JTAG pinout from SiFive. The adapter exists in two variants: with male and female PMOD connector. This adapter has the male PMOD connector. PMOD is an open standard defined by Digilent for peripherals used with FPGAs or microcontrollers. The PMOD pinout of this adapter does ONLY work with targets that use the pinout that was defined by SiFive. So it is not a general/official RISC-V pinout. In case of FPGA boards, the pinout may depend on the used FPGA image.

Converter from IDC20A to 12 pin PMOD connectors with the JTAG pinout from SiFive. The adapter exists in two variants: with male and female PMOD connector. This adapter has the female PMOD connector. PMOD is an open standard defined by Digilent for peripherals used with FPGAs or microcontrollers. The PMOD pinout of this adapter does ONLY work with targets that use the pinout that was defined by SiFive. So it is not a general/official RISC-V pinout. In case of FPGA boards, the pinout may depend on the used FPGA image.

Supports off-chip trace port for RISC-V tested for SiFive Nexus IP tested for UltraSoc Trace Encoder IP other IP on request if applied to PowerTrace Serial please add the serial number of the PowerTrace Serial to your order

Supports Trace for RISC-V - tested for SiFive Nexus IP - tested for Tessent Embedded Analytics (former UltraSoC) Trace Encoder IP other IP on request Please add the base serial number of your existing debug cable to your order.

Trace license to support trace decoding for RISC-V, applicable to AutoFocus II preprocessor. Tested for SiFive Nexus IP. Tested for Trace Encoder IP from Tessent Embedded Analytics (former UltraSoC) . Other IP on request Requires an AutoFocus II preprocessor with a base serial number of C1210xxxxxxx or higher. Please add the base serial number of your existing AutoFocus II preprocessor to your order.

Trace license to support trace decoding for RISC-V, applicable to AutoFocus II or a PowerTrace Serial. Tested for SiFive Nexus IP. Tested for Trace Encoder IP from Tessent Embedded Analytics (former UltraSoC) . Other IP on request If the license is applied to an AutoFocus II preprocessor, the preprocessor must have a base serial number of C1210xxxxxxx or higher. Please add the base serial number of your existing AutoFocus II preprocessor or PowerTrace Serial to your order.

tested for SiFive Nexus IP tested for Tessent Embedded Analytics (former UltraSoc) Trace Encoder IP other IP on request Variable threshold level and termination voltage, AUTOFOCUS self calibration technology, Voltage: 1.2 to 3.3V - else contact support Traceport: 1-32bit Bandwidth: 9.6 Gbps (300MHz clock speed, DDR) Connector: 2x38 pin mictor connector Requires PowerTrace Version 6 or higher or PowerTrace II / III

Preprocessor for Trace RISC-V tested for SiFive Nexus IP tested for UltraSoc Trace Encoder IP other IP on request Variable threshold level and termination voltage, AUTOFOCUS self calibration technology, Voltage: 1.2 to 3.3V - else contact support Traceport: 1-32bit Bandwidth: 9.6 Gbps (300MHz clock speed, DDR) Connector: 2x38 pin mictor connector Requires PowerTrace Version 6 or higher or PowerTrace II / III

Trace recorder for serial high-speed ports with 4 Gigabyte trace memory for RISC-V Tested for SiFive Nexus IP. Tested for Tessent Embedded Analytics (aka. UltraSoC) encoder IP Other IP on request. Records up to 8 lanes with 12.5 Gbit/s per lane (more with opt. Prepro.) Voltage range: 0.15 to 1.25 differential voltage. Requires accessory kit LA-3521 or LA-3522. Requires PowerDebug X50, PowerDebug PRO, or PowerDebug II. Requires PC with USB 3 or Gigabit Ethernet, 4 GB RAM min, and 64-bit OS.

Trace recorder for serial high-speed ports with 8 Gigabyte trace memory for RISC-V Tested for SiFive Nexus IP. Tested for Tessent Embedded Analytics (aka. UltraSoC) encoder IP Other IP on request. Records up to 8 lanes with 12.5 Gbit/s per lane (more with opt. Prepro.) Voltage range: 0.15 to 1.25 differential voltage. Requires accessory kit LA-3521 or LA-3522. Requires PowerDebug X50, PowerDebug PRO, or PowerDebug II. Requires PC with USB 3 or Gigabit Ethernet, 4 GB RAM min, and 64-bit OS.