Product Catalogue

Converter to connect Preprocessor AutoFocus II Mictor38 to MIPI60 (QSH) connector ARM/Cortex: Converter to connect Mictor38 TRACE A and TRACE B (32-bit ETMv3/PTM) and an IDC20A Debug Cable to a MIPI60 connector on the target Intel x86/x64: Converter to connect Mictor38 TRACE A to to a MIPI60 connector on the target Former name: Conv. Prepro.AF II Mictor, ARM20 to MIPI60

Converter to connect an ARM Preprocessor (up to 24-bit PTM/ETMv3) and up to three CombiProbes (3x STM/STP) to a MIPI-60 connector on the target. This converter is designed for U8500/U5500 from ST Ericsson.

Converter to connect an ARM Preprocessor (up to 18-bit PTM) and one CombiProbe (STM; two connection options) or a Debug Cable to a MIPI-60 connector on the target. This converter is designed for OMAP4xxx based boards from Texas Instruments. Former name: OMAP4 Conv. 2xMictor/ARM20/MIPI34 to MIPI60

Converter to connect an ARM Preprocessor and a CombiProbe to a Mictor connector on the target. This converter is designed for the OMAP3503 board from Spectrum Digital. The upper ETM signals on the Mictor can alternatively be used for system trace (SDTI).

ARM Converter to connect an ARM Preprocessor with one Mictor-38 for 16-bit ETMv3 and one CombiProbe for a 4-bit system trace port to a MIPI-60 connector on the target

Converter 16 Pin JTAG to 10 Pin Half-Size-Connector DAP Interface for TriCore / XC2000 requires LA-7759 (OCDS Debugger for XC2000/C166S V2) or LA-7756 (OCDS Debugger for TriCore)

Converter to connect an ARM Preprocessor to a MIPI-60 on the target. Suitable for up to 16-bit ETMv3. The converter is prepared to support various other configurations because all clock and data signals of the MIPI-60 are connected to the Preprocessor.

Converter to connect a Preprocessor with MIPI-60 connector to a Mictor-38 connector on the target assuming an ETMv3 pinout up to 16 bit.

Converter 16 Pin JTAG to 10 Pin Half-Size-Connector for BOSCH MEDC17 requires LA-7756 (OCDS Debugger for TriCore)

Converter to connect an ARM ETM MIPI Preprocessor with MIPI-60 connector and an ICD20A Debug Cable to two Mictor-38 connectors (32-bit ETMv3/PTM) on the target Former name: Conv. ARM-20 MIPI-60-34 to 2x Mictor-38

Converter to connect an IDC20A Debug Cable to a 14-pin JTAG connector on Xilinx target boards.

Converter Mictor38 ARM20 MIPI34 UART with SMDswitch to SD or Micro SD Socket

Converter Mictor38 ARM20 MIPI34 UART to SD or Micro SD Socket

Converter from Mictor76 to Mictor38 for LA-3909 (Preprocessor for RH850/V850 Flex Cable)

Converter to connect an IDC20A Debug Cable to a standard 6-pin "Pmod™" connector “Pmod™” is a trademark of Digilent Inc Former name: Conv. ARM-20 to Digilent PMOD

Converter MIPI60/20 Pin JTAG (ARM and TI) to 60 Pin CTOOLS connector on target

Adapter for debugging over a CAN bus with up to 1 Mbit/s supporting DAP over CAN Physical Layer (DXCPL) and more, with internal termination resistor. Usage with PowerDebug E40 / X50 / PRO requires one of the following: LA-3203 Debugger for TriCore AUTO26 (PACK), LA-3081 CombiProbe 2 for AUTO26 (PACK), LA-2707 Debugger for TriCore Automotive PRO (EOL). Usage with PowerDebug USB 3 / USB 2 / Ethernet / II requires one of the following:: LA-3203 Debugger for TriCore AUTO26 (PACK), LA-3081 CombiProbe 2 for AUTO26 (PACK), LA-2707 Debugger for TriCore Automotive PRO (EOL). LA-3737 Debugger for TriCore Automotive (EOL), LA-7756 Debugger for TriCore Standard (16-pin) (EOL).

Adapter for debugging over a CAN bus with up to 8 Mbit/s supporting DAP over CAN Physical Layer (DXCPL), DAP over CAN Message (DXCM) and more. Includes a removable CAN termination resistor (120 Ohm). Requires an AUTO26 Debug Cable V3 (LA-3011), AUTO26 Debug Cable V2 (LA-3010), or a CombiProbe2 with AUTO26 Whisker (LA-3081).

Preprocessor for ST40 with AUD, 200 MHz clock speed with 36-pin Yamaichi connector Requires LA-7985 for 14 pin AUD connector voltage range 3.0V to 3.6V Requires PowerTrace Version 6 or higher or PowerTrace II / III

Preprocessor for NIOS-II, 150 MHz DDR clock speed, with MICTOR38 connector requires PowerTrace voltage range 1.5V to 5.0V