Product Catalogue

Connector for Intel MIPI60 Converged on target to - Whisker MIPI60-Q for Quad-Probe x86/x64 - Prepro. for Intel® PT AUTOFOCUS MIPI60-P Connector for Intel MIPI60 Converged on target to - Whisker MIPI60-Cv2 for CombiProbe - Prepro. for Intel® PT AUTOFOCUS MIPI60-P

Converter for Autofocus Trace to Hirose 36 connector for SHx processors

converter only for LA-7817 (JTAG Debugger for SH2/SH3/SH4 20 Pin) to support the ASEBRK signal

Testadapter from 34pin MIPI to 1 x 20pin 2,54mm post-header to 60 pin XDP Intel x86/x64 (LA-3776)

Testadapter from 60 pin XDP to 3 x 20pin 2,54mm post-header to 60 pin XDP for Intel x86/x64 (LA-3776)

Converter from 60 pin XDP (Samtec) connector on JTAG Debugger for Intel x86/x64 (LA-3776) to 31 pin XDP-SSA (Hirose) connector (not recommended because of poor signal quality)

Converter from 60pin XDP (Samtec) connector on JTAG Debugger for Intel x86/x64 (LA-3776) to Intel MIPI34 connector

Converter from JTAG 16 (TriCore pinout of LA-7756) and Samtec 40 pin -> ERF8 22 pin (Samtec 22 pin) Includes Samtec 22-pin flex extension Converter from AUTO26 (TriCore pinout of LA-3737) and Samtec 40 pin -> ERF8 22 pin (Samtec 22 pin) for LA-3912 Preproc. TriCore AGBT HF-Flex and if no separate JTAG/AUTO connector is available on the target for LA-2707 (Debugger for TriCore Automotive PRO) LA-3203 (Debugger for TriCore AUTO26 (PACK)) LA-3737 (JTAG Debugger for TriCore Automotive) LA-7756 (OCDS Debugger for TriCore)

Converter from Beyond (20-pin) to NXP/Jennic (10-pin) LA-3793 (JTAG Debugger for Beyond)

Converter to connect a Debug Cable to 10/20/34 pin connectors specified by MIPI.

Converter to connect a RH850 HSTP Aurora Preprocessor to the Renesas Evalboard: RH850-CCC-404PIN-PB-T1-V1

SABRE-AI to TRACE32 ADAPTER BOARD Convert Mictor38 to SABRE-AI Target Board

Converter for RH850-Samtec34 pinassignment to a target with a Samtec46 debug/trace connector.

Preprocessor for Real-Time Trace of STRED Variable threshold level and termination voltage, AUTOFOCUS self calibration technology, Voltage: 1.2 to 3.3V - else contact support Traceport: 1-32bit Bandwidth: 9.6 Gbps (300MHz clock speed, DDR) Connector: 2x38 pin mictor connector Requires PowerTrace Version 6 or higher or PowerTrace II / III

Trace license to support STRED Trace applicable to an AutoFocus II preprocessor. Please add the base serial number of your existing AutoFocus II preprocessor to your order. Requires an AutoFocus II preprocessor with a base serial number of C1210xxxxxxx or higher.

Preprocessor for CoreSight Real-Time Trace for Xtensa Variable threshold level and termination voltage, AUTOFOCUS self calibration technology, Voltage: 1.2 to 3.3V - else contact support Traceport: 1-32bit Bandwidth: 9.6 Gbps (300MHz clock speed, DDR) Connector: 2x38 pin mictor connector Requires PowerTrace Version 6 or higher or PowerTrace II / III

Supported for ARC Real-Time Trace (ARC RTT) if applied to an serial preprocessor please add the serial number of the preprocessor to your order

Preprocessor for C7000 Trace Variable threshold level and termination voltage, AUTOFOCUS self calibration technology, Voltage: 1.2 to 3.3V - else contact support Traceport: 1-32bit Bandwidth: 9.6 Gbps (300MHz clock speed, DDR) Connector: 2x38 pin mictor connector Requires PowerTrace Version 6 or higher or PowerTrace II / III

Trace license to support trace decoding for C7000 DSPs, applicable to an AutoFocus II preprocessor. Requires an AutoFocus II preprocessor with a base serial number of C1210xxxxxxx or higher. Please add the base serial number of your existing AutoFocus II preprocessor to your order.

Preprocessor for Real-Time Trace of C7000 Variable threshold level and termination voltage, AUTOFOCUS self calibration technology, Voltage: 1.2 to 3.3V - else contact support Traceport: 1-32bit Bandwidth: 9.6 Gbps (300MHz clock speed, DDR) Connector: 60 pin Samtec connector (MIPI) Requires PowerTrace Version 6 or higher or PowerTrace II / III