Product Catalogue
Find TRACE32 product
Converter from JTAG14 of LA-7753 (JTAG Debugger Qorivva MPC5xxx/SPC5xxx) and from AUTO26 of LA-2708 (Debugger for MPC5xxx Automotive PRO) LA-3736 (JTAG Debugger for MPC5xxx Automotive) and Samtec 40 pin of LA-3911 (Preprocessor Aurora NEXUS Automotive) to Samtec ERF 22-pin Power.ORG pinout Includes Samtec 22-pin flex extension for LA-3911 Preproc. Aurora NEXUS and if no separate JTAG/AUTO connector is available on the target, for LA-7753 (JTAG Debugger Qorivva MPC5xxx/SPC5xxx)
Converter to connect the IDC20A Debug Cable to a Mictor connector on the target providing both debug and trace signals. This is needed if you want to connect the Debug Cable without a Preprocessor and if there is only a Mictor on the target. Former name: ARM Converter ARM-20 to Mictor-38
Converter 14 Pin JTAG/OnCE connector to Mictor38 on target for Qorivva MPC5xxx and SPC5xxx
Converter Mictor38 (NEXUS) connector to 14 Pin JTAG on target for MPC5xxx
Converter to connect two ARM Debug Cable to one connector on the target. Old method to handle multicore debugging by using two debugger hardware modules.
Converter Mictor38/20 Pin JTAG (ARM and TI) to 60 Pin CTOOLS connector on target
Converter 20 Pin JTAG (ARM and TI) to 60 Pin CTOOLS connector on target (electrical same as LA-3729)
Converter 20 Pin JTAG swap (ARM and TI) to 60 Pin CTOOLS connector on target (electrical same as LA-3728)
Converter for Autofocus Trace to Hirose 36 connector for SHx processors
converter only for LA-7817 (JTAG Debugger for SH2/SH3/SH4 20 Pin) to support the ASEBRK signal
Testadapter from 34pin MIPI to 1 x 20pin 2,54mm post-header to 60 pin XDP Intel x86/x64 (LA-3776)
Testadapter from 60 pin XDP to 3 x 20pin 2,54mm post-header to 60 pin XDP for Intel x86/x64 (LA-3776)
Converter from 60 pin XDP (Samtec) connector on JTAG Debugger for Intel x86/x64 (LA-3776) to 31 pin XDP-SSA (Hirose) connector (not recommended because of poor signal quality)
Converter from 60pin XDP (Samtec) connector on JTAG Debugger for Intel x86/x64 (LA-3776) to Intel MIPI34 connector
Converter from JTAG 16 (TriCore pinout of LA-7756) and Samtec 40 pin -> ERF8 22 pin (Samtec 22 pin) Includes Samtec 22-pin flex extension Converter from AUTO26 (TriCore pinout of LA-3737) and Samtec 40 pin -> ERF8 22 pin (Samtec 22 pin) for LA-3912 Preproc. TriCore AGBT HF-Flex and if no separate JTAG/AUTO connector is available on the target for LA-2707 (Debugger for TriCore Automotive PRO) LA-3203 (Debugger for TriCore AUTO26 (PACK)) LA-3737 (JTAG Debugger for TriCore Automotive) LA-7756 (OCDS Debugger for TriCore)
Connector for Intel MIPI 60 on target to - CombiProbe Intel x86/x64 MIPI60-C - Prepro. for Intel® PT AUTOFOCUS MIPI60-P
Converter from JTAG14 of LA-7753 (JTAG Debugger Qorivva MPC5xxx/SPC5xxx) and from AUTO26 of LA-2708 (Debugger for MPC5xxx Automotive PRO) LA-3206 (Debugger for MPC5xxx AUTO26 (PACK)) LA-3736 (JTAG Debugger for MPC5xxx Automotive) and Samtec 40 pin of LA-3911 (Preprocessor Aurora NEXUS Automotive) to Samtec ERF 34-pin Power.ORG pinout Includes Samtec 34-pin flex extension
Converter from Automotive Debug Cable (26-pin) to 14 Pin JTAG/OnCE header on target for LA-2708 Debugger for MPC5xxx Automotive PRO LA-3206 Debugger for MPC5xxx AUTO26 (PACK) LA-3736 JTAG Debugger for MPC5xxx Automotive
Converter from Automotive Debug Cable (26-pin) to Mictor 38pin (NEXUS MPC5XXX pinout) for LA-2708 (Debugger for MPC5xxx Automotive PRO) LA-3206 Debugger for MPC5xxx AUTO26 (PACK) LA-3736 (JTAG Debugger for MPC5xxx Automotive)
Converter from Automotive Debug Cable (26-pin) to Samtec 50pin (NEXUS MPC5XXX pinout) for LA-2708 (Debugger for MPC5xxx Automotive PRO) LA-3206 Debugger for MPC5xxx AUTO26 (PACK) LA-3736 (JTAG Debugger for MPC5xxx Automotive)