TRACE32 Debugger for FA616TE

Universal Trace Port Controller,
8 Giga Byte Trace Memory

requires PowerDebug II Ethernet, PowerDebug PRO
or PowerDebug X50
and TRACE32 software DVD 2021/02 or newer

supports Arm9

IDC20A debug cable supports 5-pin standard JTAG, cJTAG and
Serial Wire Debug Port, (0.4V - 5V)

includes software for Windows, Linux and MacOSX

cJTAG and SWD require
Power Debug Interface USB 2.0/USB 3.0,
Power Debug Ethernet, PowerTrace, Power Debug II
PowerDebug PRO, PowerDebug E40 or PowerDebug X50



Consists of
LA-3000 IDC20A Debug Cable V5 for JTAG/SWD
LA-7742A JTAG Debugger License for Arm9 Add.
LA-8017I TRACE32-ICD Software Warranty First Year

Parallel preprocessor for Arm/Cortex
Embedded Trace Macrocell (ETM),
Program Trace Macrocell (PTM)

Connector cable and software,
Variable threshold level and termination voltage,
AUTOFOCUS self calibration technology,
Support all ETM modes, with 2 MICTOR connectors,

Voltage: 1.2 to 3.3V - else contact support
Traceport: 1-32bit
Bandwidth: 9.6 Gbps (300MHz clock speed, DDR)
Connector: 2x38 pin mictor connector

Requires PowerTrace II / III, PowerTrace PX
or PowerTrace/Ethernet Version 6 or higher



Consists of
LA-3100 AutoFocus II Hardware V2
LA-1370 Mictor Flex Extension
LA-7970A Trace License for Arm (AF-II/PTS)
LA-3407I GTM tracing included

eXtended connectivity line universal debug controller
with 1 Gbit Ethernet and
USB 3.0 for Windows/Linux/MacOSX

can be used for TRACE32 Debug Cable and
for the TRACE32 CombiProbe

requires TRACE32 software DVD 2022/09 SP2 or newer


Includes
LA-1958- EU/US/IN/CN/UK Desktop Power Supply
LA-1943 USB-3 Cable
LA-7411 Trigger Connector for PowerTools

Universal Trace Port Controller,
1 GByte Trace Memory
Streaming rate up to 100 MByte/s

requires PowerDebug II Ethernet, PowerDebug PRO
or PowerDebug X50
and TRACE32 software DVD 2022/02 or newer

Allows the concurrent debugging of
2 or more identical cores

Please add the base serial number of your Debug
Cable respectively the serial number of the CombiProbe
to your order

No "License for Multicore Debugging" is needed if the
Debug Cable or the CombiProbe already has 2 debug licenses

Converter to connect an IDC20A Debug Cable
to a MIPS-14 connector on the target

Former name: Converter ARM-20 to MIPS-14

Converter to connect the IDC20A Debug Cable to a Mictor
connector on the target providing both debug and
trace signals. This is needed if you want to connect
the Debug Cable without a Preprocessor and if there
is only a Mictor on the target.

Former name: ARM Converter ARM-20 to Mictor-38

Converter to connect an IDC20A Debug Cable to a TI-14
connector which is used on many targets with
processors from Texas Instruments

Former name: Converter ARM-20 to TI-14

Converter to connect a Debug Cable to a TI-14 or
TI-20-Compact connector which is used on many
targets with processors from Texas Instruments

Former name: Converter ARM-20 to TI-14 or TI-20-Compact

Converter to connect a 20-pin debug cable to 10/20/34 pin
connectors specified by MIPI

Former name: Converter ARM-20 to MIPI-10/20/34 Arm/RISC-V


Includes
LA-1937 MIPI-Half-Size-Cable 34-10
LA-1938 MIPI-Half-Size-Cable 34-20
LA-1939 MIPI-Half-Size-Cable 34

Converter to connect an Arm Debug Cable V1 (ARM-14)
to IDC20A or to connect a newer IDC20A Debug Cable
to ARM-14 target connector

ARM-14 is an obsolete connector specification,
do not use for new designs

Former name: ARM Converter ARM-20 to/from ARM-14

Adapter 20 pin 100 mil to 50 mil with cable


Includes
LA-2111 Half-Size-Cable 20