Search results for "plx"

supports Qorivva MPC5xxx/SPC5xxx (e200 cores) and Freescale PX SERIES processors eTPU, GTM and SPT debugging included includes software for Windows, Linux and MacOSX requires Power Debug Module Concurrent debugging of multiple e200 cores on multicore processors requires a License for Multicore Debugging (LA-7960X) (not necessary for lockstep mode) debug cable with 14 pin connector

Preprocessor for Real-Time Trace of MIPS32 EJTAG 2.6 derivatives or higher 600 MBaud (300MHz clock speed, DDR) Variable threshold level and termination voltage, AUTOFOCUS self calibration technology, Supports 1.2 to 3.3V - otherwise contact support Requires PowerTrace II, PowerTrace PX or PowerTrace/Ethernet Version 6 or higher voltage range 1.2V to 3.3V

Adapter for NEXUS on Spanish Oak (MPC565), Silver Oak (MPC561) and Green Oak (MPC563) with 38 pin mictor connector includes software for Windows, Linux and MacOSX only with PowerTrace Ethernet 256MB/512MB or PowerTrace PX AMP40NS NEXUS connector requires LA-7793 AMP50 NEXUS connector requires LA-7794 GLENAIR51 NEXUS connector requires LA-7797

Converter for Preprocessor for MIPS Mictor38 to Samtec52 to support Micronas MDEB (Lexra LX4280) processor Target connector: FTSH-126-04-L-DV (SMD, small height) FTSH-126-04-L-D (through-hole, small height) FW-26-05-L-D-XXX-150 (SMD, "XXX" selectable height) FW-26-02-L-D-XXX-150 (through-hole, selectable height)

Converter for Preprocessor for MIPS Mictor38 to Samtec52 to support Micronas MDED (Lexra LX4280) processor Target connector: FTSH-126-04-L-DV (SMD, small height) FTSH-126-04-L-D (through-hole, small height) FW-26-05-L-D-XXX-150 (SMD, "XXX" selectable height) FW-26-02-L-D-XXX-150 (through-hole, selectable height)

Preprocessor for Beyond BA2x cores Instruction trace only 600 MBaud (300MHz clock speed, DDR) Variable threshold level and termination voltage, AUTOFOCUS self calibration technology, Supports 1.8 to 3.3V - otherwise contact support Requires PowerTrace II, PowerTrace PX or PowerTrace/Ethernet Version 6 or higher May require LA-3804 Converter Mictor 38 to XILINX XGI voltage range 1.2V to 3.3V

Adapter for NEXUS on AVR32 (up to 16 bit MDO, up to 2 bit MSEO) up to 200 MBit/s Port Voltage 1.0 V .. 5.0 V NEXUS probe provides 76 pin mictor connector requires LA-7631 for Mictor 38 on target includes software for Windows, Linux and MacOSX only with PowerTrace Ethernet 256MB/512MB or PowerTrace PX please contact Lauterbach if the serial number of your PowerTrace is lower than E03010003982

Parallel preprocessor for tracing VSPA vector processors. Includes connector cable and software. Voltage: 1.2 to 3.3V (contact support otherwise) Traceport: 1-32 bit Bandwidth: up to 600+ Mbit/s per trace signal Connector: Two 38 pin mictor connectors Variable threshold level and termination voltage, AUTOFOCUS self calibration technology Requires a PowerTrace module: PowerTrace PX / II / III (or PowerTrace Ethernet vers 6).

Parallel preprocessor for off-chip trace of CEVA-X cores. Includes connector cable and software. Voltage: 1.2 to 3.3V (contact support otherwise) Traceport: 1-32 bit Bandwidth: up to 600+ Mbit/s per trace signal Connector: Two 38 pin mictor connectors Variable threshold level and termination voltage, AUTOFOCUS self calibration technology Requires a PowerTrace module: PowerTrace PX / II / III (or PowerTrace Ethernet vers 6).

Parallel preprocessor for tracing C7000 DSPs. Includes connector cable and software. Voltage: 1.2 to 3.3V (contact support otherwise) Traceport: 1-32 bit Bandwidth: up to 600+ Mbit/s per trace signal Connector: 60 pin Samtec connector (MIPI) Variable threshold level and termination voltage, AUTOFOCUS self calibration technology Requires a PowerTrace module: PowerTrace PX / II / III (or PowerTrace Ethernet vers 6).