Chip: RX630
Vendor:
Renesas Electronics Corp.
Family:
RX
Cores:
RX
RECOMMENDED CONFIGURATIONS
Find the Ideal Tool Configuration for RX630
Throughout our recommended debug and trace solutions, you can easily find and select the most suitable tool configuration for your chip. Whether you need to perform simple hardware debugging or more advanced tasks such as off-chip tracing, the following TRACE32 configurations will provide you with a good starting point.
1/3: Debugger with optional On-Chip Trace (2)
Essential Debugger with USB
Hardware
Lauterbach PowerDebug E40 with RX debug probe
Software
Includes PowerView software, debug license and 1 year maintenance
PC connection
USB 3
Debug port
1
On-chip trace
Included for RX (RX onchip trace supports up to 256 program branches and/or data records)
Off-chip trace
Not supported for RX with a PowerDebug E40
Universal Debugger ready for PowerTrace
Hardware
Lauterbach PowerDebug X51 with RX debug probe
Software
Includes PowerView software, debug license and 1 year maintenance
PC connection
USB 3 and Gigabit Ethernet
Debug port
1
On-chip trace
Included for RX (RX onchip trace supports up to 256 program branches and/or data records)
Off-chip trace
via optional AUD-4 trace probe at a PowerTrace extension (if supported by device)
2/3: Debugger & Off-Chip Trace (2)
Cost-Effective Parallel Trace
Debug Hardware
Lauterbach PowerDebug X51 with RX debug probe
Trace Hardware
PowerTrace II Lite with AUD-4 trace probe
Software
Includes PowerView software, debug license and 1 year maintenance
PC connection
USB 3 and Gigabit Ethernet
Debug Port
1
Trace Port
36 Pin Hirose Connector for 4 trace data lines
Recording speed
up to 100 Mbit/s per trace signal @ 200 MHz trace clock
Streaming
100 MByte/s
Trace Memory
1 GByte
Signal probing
not available
High-performance Parallel Trace
Debug Hardware
Lauterbach PowerDebug X51 with RX debug probe
Trace Hardware
PowerTrace III with AUD-4 trace probe
Software
Includes PowerView software, debug license and 1 year maintenance
PC connection
USB 3 and Gigabit Ethernet
Debug Port
1
Trace Port
36 Pin Hirose Connector for 4 trace data lines
Recording speed
up to 100 Mbit/s per trace signal @ 200 MHz trace clock
Streaming
400 MByte/s
Trace Memory
8 GByte
Signal probing
via optional Mixed-Signal Probe
3/3: TRACE32 Instruction Set Simulator (1)
Instruction Set Simulator
Simulator
Simulates the instruction set of an architecture family (including its subfamilies)
Extendable
Models of memory mapped peripheral can be connected
Automated testing
The included license allows automated tests with the simulator.
Content
Includes PowerView software, simulator license and 1 year maintenance