Chip: FE310-G002
Vendor:
SIFIVE
Family:
Essential
Main Core:
E31
RECOMMENDED CONFIGURATIONS
Find the Ideal Tool Configuration for FE310-G002
Throughout our recommended debug and trace solutions, you can easily find and select the most suitable tool configuration for your chip. Whether you need to perform simple hardware debugging or more advanced tasks such as off-chip tracing, the following TRACE32 configurations will provide you with a good starting point.
1/4: µTrace (1)
2/4: CombiProbe (2)
3/4: Debugger (2)
4/4: TRACE32 Instruction Set Simulator (1)
Debug Solution for 32-bit RISC-V
Hardware
Lauterbach µTrace for RV32 with MIPI20-HS whisker
Software
Includes PowerView software, debug license and 1 year maintenance
PC connection
USB 3
Debug port
1 (MIPI20T, MIPI10, IDC20A)
Supported Chips
All 32-bit RISC-V chips
Multicore debugging
Among RV32 cores via optional license
On-chip trace
planned
Off-chip trace
Hardware is ready for upcoming trace standard
Signal probing
via optional Mixed-Signal Probe
Essential Debugger with USB and System Trace support
Hardware
Lauterbach PowerDebug E40 with CombiProbe 2
Software
Includes PowerView software, debug license and 1 year maintenance
PC connection
USB 3
Debug & Trace port
1 by default, 2 with extra whisker
Multicore debugging
Yes, for same and other architectures via optional licenses
On-chip trace
via optional license
Off-chip trace
4 bit parallel trace ports (for e.g. STP/STM) on each port
Recording speed
400 Mbit/s per signal (3.2 Gbit/s total)
Streaming
140 Mbyte/s
Trace Memory
512 MByte
Signal probing
via optional Mixed-Signal Probe
Universal Debugger with Ethernet/USB and System Trace support
Hardware
Lauterbach PowerDebug X50 with CombiProbe 2
Software
Includes PowerView software, debug license and 1 year maintenance
PC connection
USB 3 and Gigabit Ethernet
Debug & Trace port
1 by default, 2 with extra whisker
Multicore debugging
Yes, for same and other architectures via optional licenses
On-chip trace
via optional license
Off-chip trace
4 bit parallel trace ports (for e.g. STP/STM) on each port
Recording speed
400 Mbit/s per signal (3.2 Gbit/s total)
Streaming
140 Mbyte/s
Trace Memory
512 MByte
Signal probing
via optional Mixed-Signal Probe
Essential Debugger with USB
Hardware
Lauterbach PowerDebug E40 with IDC20A debug probe
Software
Includes PowerView software, debug license and 1 year maintenance
PC connection
USB 3
Debug port
1 (IDC20A)
Debug clock
10 kHz to 100 MHz (depends on target)
Voltage range
0.4 V to 5.0 V
Multicore debugging
Yes, for same and other architectures via optional licenses
On-chip trace
via optional license
Off-chip trace
via optional CombiProbe extension (for 4 bit trace ports)
Universal Debugger ready for PowerTrace
Hardware
Lauterbach PowerDebug X50 with IDC20A debug probe
Software
Includes PowerView software, debug license and 1 year maintenance
PC connection
USB 3 and Gigabit Ethernet
Debug port
1 (IDC20A)
Debug clock
10 kHz to 100 MHz (depends on target)
Voltage range
0.4 V to 5.0 V
Multicore debugging
Yes, for same and other architectures via optional licenses
On-chip trace
via optional license
Off-chip trace
via optional PowerTrace or CombiProbe extension
Instruction Set Simulator
Simulator
Simulates the instruction set of an architecture family (including its subfamilies)
Extendable
Models of memory mapped peripheral can be connected
Automated testing
The included license allows automated tests with the simulator.
Content
Includes PowerView software, simulator license and 1 year maintenance