Go to homepage
Cart
Categories

Chip: OH-CV32E40P

Vendor: OPENHW_GROUP
Family: CORE-V
Main Core: OH-CV32E40P
RECOMMENDED CONFIGURATIONS

Find the Ideal Tool Configuration for OH-CV32E40P

Throughout our recommended debug and trace solutions, you can easily find and select the most suitable tool configuration for your chip. Whether you need to perform simple hardware debugging or more advanced tasks such as off-chip tracing, the following TRACE32 configurations will provide you with a good starting point.

Solution for OH-CV32E40P
Debug Solution for 32-bit RISC-V
Description Debug Solution for 32-bit RISC-V
Hardware Lauterbach µTrace for RV32 with MIPI20-HS whisker
Software Includes PowerView software, debug license and 1 year maintenance
PC connection USB 3
Debug port 1 (MIPI20T, MIPI10, IDC20A)
Supported Chips All 32-bit RISC-V chips
Multicore debugging Among RV32 cores via optional license
On-chip trace planned
Off-chip trace Hardware is ready for upcoming trace standard
Signal probing via optional Mixed-Signal Probe
More Details
Solution for OH-CV32E40P
Essential Debugger with USB and System Trace support
Description Essential Debugger with USB and System Trace support
Hardware Lauterbach PowerDebug E40 with CombiProbe 2
Software Includes PowerView software, debug license and 1 year maintenance
PC connection USB 3
Debug & Trace port 1 by default, 2 with extra whisker
Multicore debugging Yes, for same and other architectures via optional licenses
On-chip trace via optional license
Off-chip trace 4 bit parallel trace ports (for e.g. STP/STM) on each port
Recording speed 400 Mbit/s per signal (3.2 Gbit/s total)
Streaming 140 Mbyte/s
Trace Memory 512 MByte
Signal probing via optional Mixed-Signal Probe
More Details
Solution for OH-CV32E40P
Universal Debugger with Ethernet/USB and System Trace support
Description Universal Debugger with Ethernet/USB and System Trace support
Hardware Lauterbach PowerDebug X50 with CombiProbe 2
Software Includes PowerView software, debug license and 1 year maintenance
PC connection USB 3 and Gigabit Ethernet
Debug & Trace port 1 by default, 2 with extra whisker
Multicore debugging Yes, for same and other architectures via optional licenses
On-chip trace via optional license
Off-chip trace 4 bit parallel trace ports (for e.g. STP/STM) on each port
Recording speed 400 Mbit/s per signal (3.2 Gbit/s total)
Streaming 140 Mbyte/s
Trace Memory 512 MByte
Signal probing via optional Mixed-Signal Probe
More Details
Solution for OH-CV32E40P
Universal Debugger ready for PowerTrace
Description Universal Debugger ready for PowerTrace
Hardware Lauterbach PowerDebug X50 with IDC20A debug probe
Software Includes PowerView software, debug license and 1 year maintenance
PC connection USB 3 and Gigabit Ethernet
Debug port 1 (IDC20A)
Debug clock 10 kHz to 100 MHz (depends on target)
Voltage range 0.4 V to 5.0 V
Multicore debugging Yes, for same and other architectures via optional licenses
On-chip trace via optional license
Off-chip trace via optional PowerTrace or CombiProbe extension
More Details
Solution for OH-CV32E40P
Essential Debugger with USB
Description Essential Debugger with USB
Hardware Lauterbach PowerDebug E40 with IDC20A debug probe
Software Includes PowerView software, debug license and 1 year maintenance
PC connection USB 3
Debug port 1 (IDC20A)
Debug clock 10 kHz to 100 MHz (depends on target)
Voltage range 0.4 V to 5.0 V
Multicore debugging Yes, for same and other architectures via optional licenses
On-chip trace via optional license
Off-chip trace via optional CombiProbe extension (for 4 bit trace ports)
More Details
Solution for OH-CV32E40P
Universal Debugger ready for PowerTrace
Description Universal Debugger ready for PowerTrace
Hardware Lauterbach PowerDebug X50 with IDC20A debug probe
Software Includes PowerView software, debug license and 1 year maintenance
PC connection USB 3 and Gigabit Ethernet
Debug port 1 (IDC20A)
Debug clock 10 kHz to 100 MHz (depends on target)
Voltage range 0.4 V to 5.0 V
Multicore debugging Yes, for same and other architectures via optional licenses
On-chip trace via optional license
Off-chip trace via optional PowerTrace or CombiProbe extension
More Details
Solution for OH-CV32E40P
Essential Debugger with USB
Description Essential Debugger with USB
Hardware Lauterbach PowerDebug E40 with IDC20A debug probe
Software Includes PowerView software, debug license and 1 year maintenance
PC connection USB 3
Debug port 1 (IDC20A)
Debug clock 10 kHz to 100 MHz (depends on target)
Voltage range 0.4 V to 5.0 V
Multicore debugging Yes, for same and other architectures via optional licenses
On-chip trace via optional license
Off-chip trace via optional CombiProbe extension (for 4 bit trace ports)
More Details
Solution for OH-CV32E40P
High-performance Parallel Trace
Description High-performance Parallel Trace
Debug Hardware Lauterbach PowerDebug X50 with debug probe
Trace Hardware PowerTrace III with AutoFocus II trace probe
Software Includes PowerView software, debug license and 1 year maintenance
Multicore support Yes, for same and other architectures via optional licenses
PC connection USB 3 and Gigabit Ethernet
Debug Port 1
Trace Port 2x MICTOR38 connectors for one port with up to 36 signals
Recording speed 600+ Mbit/s per signal for 17 signal
Streaming 400 Mbyte/s
Trace Memory 8 GByte
Signal probing via optional Mixed-Signal Probe
More Details
Solution for OH-CV32E40P
Cost-Effective Parallel Trace
Description Cost-Effective Parallel Trace
Debug Hardware Lauterbach PowerDebug X50 with debug probe
Trace Hardware PowerTrace II Lite with AutoFocus II trace probe
Software Includes PowerView software, debug license and 1 year maintenance
Multicore support Yes, for same and other architectures via optional licenses
PC connection USB 3 and Gigabit Ethernet
Debug Port 1
Trace Port 2x MICTOR38 connectors for one port with up to 36 signals
Recording speed 450 Mbit/s per signal for 17 signal
Streaming 100 Mbyte/s
Trace Memory 1 GByte
Signal probing not available
More Details
Solution for OH-CV32E40P
Universal Debugger ready for PowerTrace
Description Universal Debugger ready for PowerTrace
Hardware Lauterbach PowerDebug X50 with IDC20A debug probe
Software Includes PowerView software, debug license and 1 year maintenance
PC connection USB 3 and Gigabit Ethernet
Debug port 1 (IDC20A)
Debug clock 10 kHz to 100 MHz (depends on target)
Voltage range 0.4 V to 5.0 V
Multicore debugging Yes, for same and other architectures via optional licenses
On-chip trace via optional license
Off-chip trace via optional PowerTrace or CombiProbe extension
More Details
Solution for OH-CV32E40P
Serial Trace with Aurora 2 probe for highest speeds
Description Serial Trace with Aurora 2 probe for highest speeds
Debug Hardware Lauterbach PowerDebug X50 with debug probe
Trace Hardware PowerTrace Serial 2 with Aurora 2 trace probe
Software Includes PowerView software, debug license and 1 year maintenance
Multicore support Yes, for same and other architectures via optional licenses
PC connection USB 3 and Gigabit Ethernet
Debug Port 1
Serial trace lanes up to 8
Recording speed 22.5 Gbit/s per lane @ 4 lanes, 12.5 Gbit/s per lane @ 8 lanes
Streaming 400 Mbyte/s
Trace Memory 4 GByte
Signal probing via optional Mixed-Signal Probe
More Details
Solution for OH-CV32E40P
Debugging via 3rd party API
Description Debugging via 3rd party API
Supported High-Level APIs MCD, GDB, CADI, IRIS, GDI, ARCINT (depends on CPU architecture)
Supported Low-Level APIs XCP, GTL, CSWP, SPP, VPI, DCI.DbC, Tessent/USOC (depends on CPU architecture)
Content Includes PowerView software, front-end license and 1 year maintenance
Licenses Options Backend-license for low-level APIs, Trace decoder license
More Details
Solution for OH-CV32E40P
Instruction Set Simulator
Description Instruction Set Simulator
Simulator Simulates the instruction set of an architecture family (including its subfamilies)
Extendable Models of memory mapped peripheral can be connected
Automated testing The included license allows automated tests with the simulator.
Content Includes PowerView software, simulator license and 1 year maintenance
More Details
Solution for OH-CV32E40P
Debugging via 3rd party API
Description Debugging via 3rd party API
Supported High-Level APIs MCD, GDB, CADI, IRIS, GDI, ARCINT (depends on CPU architecture)
Supported Low-Level APIs XCP, GTL, CSWP, SPP, VPI, DCI.DbC, Tessent/USOC (depends on CPU architecture)
Content Includes PowerView software, front-end license and 1 year maintenance
Licenses Options Backend-license for low-level APIs, Trace decoder license
More Details
We, Lauterbach GmbH, use cookies and similar technologies on our website to provide the best possible experience. More information